2006 SUBARU BAJA lock

6-5
Interior and exterior equipments
– CONTINUED –
„Glove box
1) Lock
2) Unlock
To open the glove box, pull the handle. To close it,
push the lid firmly upward.
To lock the glove box, insert the key and turn it clock-
wise. „
Center console
To open the lid, pull up the lock release.
1 2
HS6030BBUB6022BA

6-14
Interior and exterior equipments
There are four hooks on the back panel behind the
rear seatback.
These hooks can be used for installing a cargo net so
that small and light items can be held next to the back
panel when the rear seatback is in the down position.
Fold the rear seatback forward by pulling the release
knob up for access to the hooks.
There are two hooks on the back of the rear seatback.
Using these hooks and the two hooks at the bottom of
the back panel, it is possible to use a cargo net to re-
tain luggage on the folded-down rear seatback.
After returning the seatback to its original posi-
tion, make sure that the rear seatback has been
securely locked. When securely locked, the red
marks on the locking knobs are no longer visi-
ble.
UB6054BA

6-17
Interior and exterior equipments
– CONTINUED –
front end of the cargo bed. Keep those holes clear and
free from obstructions. „Cargo tie-down hooks
The cargo bed is equipped with four tie-down hooks so
that cargo can be secured with a luggage net or ropes.Bed extender (if equipped)
The bed extender is designed to increase the usable
cargo area of the bed.
y When the tailgate and bed extender are in the
“open/outward” position, the license plate
bracket must be lowered and locked into posi-
tion before the vehicle is driven (see section
“License plate bracket” under the heading of
“Tailgate” in chapter 2 for more information onthe function of the license plate bracket). In or-
der to avoid damaging the license plate bracket
or the bumper, make certain that the license
plate bracket is in its fully lowered/open posi-
tion before the ta ilgate is lowered.
y Do not exceed the cargo load rating of your
vehicle. Refer to “Loading your vehicle” sec-
tion in chapter 8. y Locking buckles must be engaged into the
tailgate latch while the vehicle is in motion.
y When the bed extender is not in use, the tail-
gate should be closed.y Do not use the bed extender or tailgate to se-
cure cargo.
UB6032BA

6-18
Interior and exterior equipments
y
Remove the bed extender for vehicle “Off
Road” use. y To avoid creating a dangerous road hazard or
causing personal injury, cargo must not stick
out beyond the bed extender.y To avoid damage, the tailgate and bed ex-
tender must remain in the closed/inward posi-
tion when towing with a trailer hitch.y To avoid damage, clean the bed extender
only with soap, water and a soft brush.
„ Operation Open/Outward Position
– To use the bed extender in
the open/outward position, simply lower your license
plate bracket (see section “License plate bracket” un-
der heading of “Tailgate” in chapter 2), open your tail-
gate, and rotate the bed extender until it sits on the tail-gate.
After you have rotated the bed extender, lock the black
buckle pin into the tailgate latch by pushing downward
until you hear two clicks. Then tighten the tether
straps. Repeat this process for the other side. When
you want to return the tailgate and the bed extender to
the closed/inward position, pull on the tailgate release
handle to disengage the tethers.
UB8032AA
UB8033AA

6-24
Interior and exterior equipments
Hard bed cover (if equipped)
1) Warning labels
y Carefully read the warning labels on the in-
side walls of the cargo bed. y Do not sit, stand or place cargo on this cover.
y Help prevent young children from locking
themselves in the cargo bed. When leaving the
vehicle, make sure the front and rear sections
of the bed cover are both locked. Keep the hard
bed cover key out of reach of children. On hot or sunny days, the temperature in the cargo
bed could quickly become high enough to
cause death or serious heat-related injuries in-
cluding brain damage to anyone locked inside,
particularly for small children.
y
Keep the front and rear covers closed while
driving. y Do not use the bed cover to hold cargo in po-
sition. y Clean the bed cover using only cold water or
a clean, soft cloth moistened with cold or luke-
warm water. Cleaning the bed cover in any oth-
er way could result in damage.
1
1
UB6061BB

6-25
Interior and exterior equipments
– CONTINUED –
1) Front section
2) Rear section
The hard bed cover can be used to cover the entire
cargo area. Its front sect ion and rear section can be
opened separately. Also, the bed cover can be re-
moved and reinstalled as desired.
The bed cover is water-resistant, but not waterproof.
Water may enter the cargo bed during heavy rain or if
an automatic car wash is used. „ Locking and unlocking the bed cover
There is a special key for use with the hard bed cover.
The key number is stamped on the metal plate at- tached to the key. Writ
e down the key number and
keep it in another safe place, not in the vehicle. This
number is needed to make a replacement key if you lose your key.
1) Hard bed cover key
2) Key number plate
Unlock the front and rear sections of the bed
cover using the special key only. Never use the
ignition key or door key to do this, as these
keys will damage the bed cover’s key cylinders.
12
UB6078BA
112
UB6083BA

6-26
Interior and exterior equipments
The front and rear sections
of the bed cover can each
be locked and unlocked. Each section is automatically
locked when it is closed. (Refer to “Opening and clos-
ing the hard bed cover” in this section.)
T Front section
1) Lock
2) Unlock
To unlock the front section, uncover the key cylinder,
insert the key into the key cylinder, and turn it counter- clockwise.
When the key is released, it automatically returns to
the lock position.NOTE If you find the key hard to turn when unlocking the
front section, press the middle of the front section
with your other hand while turning the key. T Rear section
1) Lock
2) Unlock
To unlock the rear section, uncover the key cylinder,
insert the key into the key cylinder, and turn it counter- clockwise.
When the key is released, it automatically returns to the lock position.
1
2
UB6079BA
2 1
UB6079BB

6-27
Interior and exterior equipments
– CONTINUED –
NOTE
If you find the key hard to turn when unlocking the
rear section, press the middle of the rear section
with your other hand while turning the key. „Internal hard bed cover release handle
Never allow any child to get in the cargo bed
and play with the release handle. If the driver
starts the vehicle without knowing that a child
is inside the cargo bed and the child opens the
lid using the release handle, the child could fall
out and be killed or seriously injured.
yDo not close the hard bed cover while grip-
ping the release handle. The handle may be
damaged.y Do not use the handle as a hook to fasten
straps or ropes to secure your cargo in the car-
go bed. Such use may result in damage of the
handle. y Load the cargo bed so that cargo can not strike the release handle. If the cargo hits the
handle while the vehicle is being driven, the
handle may be pushed and the hard bed cover
may open. That may cause cargo to fall out of
the cargo bed, which could create a traffic safe-
ty hazard.
The internal release handle is designed to open the
hard bed cover from inside the cargo bed. In the event
that children or adults become locked inside the cargo
bed, the handle allows them to open the cover. The
handle is located at the back of the rear section of thecover.