Quick Reference Guide
4
Entries in the screen menus  can be made using the menu 
button. Rotating the button selects  a function or a submenu or 
adjusts a value. Pressing confirms the selection
   Backwards/forwards keys, apply to the  active audio 
source
− Press: in  Radio mode : changes station; in CD mode  changes 
song (“track”)
− Press and hold: in  Radio mode,  manual station selection; in 
CD mode  fast forward/backward search
On/off knob (push) and volume control (turn). The volume 
control will regulate the volume of the audio source currently 
selected. A bar on the screen accompanied by a value indicates 
the volume. IF the value is “0”, there is no sound. This control 
may also be used to adjust the volume of a telephone conversa-
tion or a spoken navigation message.
The main menu buttons
−  Repeat the last audio navigation instruction and show 
the current destination, position (direction) and the 
geographical position. 
−  Activates the radio mode. . . . . . . . . . . . . . . . . . . . . . 
−  Activates the CD mode.  . . . . . . . . . . . . . . . . . . . . . . . . . 
−  Goes to Navigation mode.  . . . . . . . . . . . . . . . . . . . . . . 
−  Shows the traffic reports from the current TMC 
( T raffic- Message- Channels)  ⇒page 51, “Dynamic destina-
tion guide with TMC (Traffic Message Channel)”. Press the 
function selector button   goes directly to the 
“route options” to make, for example, changes in the route 
⇒ page 42, “Route options”. During the guided navigation, 
a section of a route may be manually excluded pressing   or re-included pressing  . 
⇒ page 55, “To block sections and consult information from 
a route”. −
The button   allows adjustments to made in the selec-
tion area, on the screen (Function keys   and 
) and on the equipment ⇒ page 15, “Radio 
adjustments (SETUP)” and  ⇒page 48, “Navigation settings 
(SETUP)”.
Screen function keys. Correspond ing function indicated on the 
screen close to the button. The brackets indicate that the func-
tion is temporarily not available (for example [ERASE]  if no entry 
has been made).
 ⇒ page 9, “Sound, sound focus and volume”.
Slot for an audio or navigation CD .
Screen, adjustments on  ⇒page 8, “System settings”.
 CD eject button. The ejected CD will be pulled back into the 
unit if it is not fully withdrawn within 10 seconds.
 Set flagged destination. The unit will store the current 
vehicle position when this button is pressed  ⇒page 45, “To 
record or select a final destination, intermediate destinations, 
destinations with a flag or current position”..
 Return to the previous menu, to the previous adjustment 
and the main menu selected using the function keys.
WARNING
Adjust the volume so that you can still hear signals coming from outside 
the vehicle, such as those of the fire brigade, ambulances or police cars.
Caution
•
The screen is not a touch screen. Do not press on the surface. The screen 
can be cleaned with a soft cloth (and alcohol, if necessary). Do not use 
solvents such as turpentine or petrol to clean the surface as they will corrode 
the material.
A1A2
A3A4
INFORADIO
11
CD
16
NAV
34
TRAFFIC
OPCS. ROUTE
TRAFFIC JAM
ERASE. TRAFFIC JAM.
SETUP
BRIGHTNESS
OFF. SCREEN
A5A6
A7A8A9
A10
A11
RNS MP3_ingles  Seite 4  Mittwoch, 10. Mai 2006  7:52 19 
Radio/CD and CD charger / MP3 CD15
– Select the option  Erase the list.
– When the message  Do you really want to erase the list? , press 
the menu button once more. To erase the list, move the symbol 
 
by rotating the menu button to the left ( YES); to cancel, rotate to 
the right ( No).
If a station has been stored in the memory list or one has been selected from 
the memory list, then the equipment  returns to the main menu after 5 
seconds. However, it is still in the “Memory list” menu. The option  MEMORY 
is still highlighted with a black background and only stations from the 
memory list can be selected using the buttons   and  . To select a new 
station and to keep it in the memory store, the station list must be accessed 
by using the function button   or pressing   or  .
Up to 18 stations on the FM band may be stored and 12 on the AM band.
Note
The menu “Memory list” is  indicated by the option MEMORY  against a black 
background. Only stations from the list  can be selected. Press the function 
button   to abandon the menu.Radio adjustments (SETUP)– Press the button   to access the Radio main menu. 
– Press the function selector button marked  .
– Select the option  Traffic information, on  or  off pushing the menu 
button, rotating it and pressing once again.. –Select 
Erase list if you would like to erase the station list 
⇒ page 14.
Traffic report function TP (Traffic Program) 
The traffic radio reports of the radio station that you have selected in radio 
mode will interrupt the mode selected if  the TP function has been switched 
on. At the end of the traffic report, the equipment will automatically switch 
back to the mode selected.
If the station does not emit tr affic reports but does offer the  EON (Enhanced 
Other Network)  service and the TP function is activated, traffic reports will be 
played from the other station interrupti ng the actual audio source. During the 
report emission, the radio will tune to the station offering this service.
The information bar of the equipment displays  Traffic information, indicating 
the reception of a traffic report.
To interrupt a traffic report, press the menu button (the screen displays 
 
Cancel ). The TP function remains in standby (display:  TP) and the next traffic 
news announcement will be made in  radio mode interrupting the selected 
audio source. 
If a station is selected with the TP service deactivated, or no TP station has 
been tuned, when this service is activated then a warning signal is emitted. 
Instead of TP  ⇒page 11, fig. 7    only hyphens will be displayed. The TP 
function remains activated. If another  audio source is selected (for example 
the CD), the equipment will, in the backgro und, tune into a station with the TP 
service and will interrupt the CD in order to play the traffic reports.
In radio mode, if the signal of the station transmitting the traffic reports is 
lost, then the following station will be automatically searched.
MEMORY
SCAN
MANUAL
MEMORY
RADIO
SETUP
AD
RNS MP3_ingles  Seite 15  Mittwoch, 10. Mai 2006  7:52 19