Communication
6
Caution
If the telephone is taken from the adapter during a call then the connection
between it and the adapter of the hands-free system is interrupted. Similarly,
the battery charging from the adapter is also interrupted. However, the
connection between the hands-free system and the telephone will be re-
established after a short moment thanks to the Bluetooth technology (this
must have been previously configured)
Note
•Keeping the phone in the adapter guarantees a better transmission
quality and also keeps the battery fully charged at all times.
Fitting the adapter
The mobile phone adapter must be attached to the mounting
unit installed in the vehicle designed for this.
– Slide the lock on the mobile phone adapter Ÿfig. 3 into the
guide tab of the mounting unit .
– Push the bottom part of the mobile phone adapter down to make it engage.
Note
To avoid system malfunctions, ensure that the adapter unit is properly
attached.
Fig. 3 Installing the
adapter
A2
A1
A2
Communication7
Mobile telephone: inserting into and extracting from the
adapter
To make calls using the vehicle's external aerial and use the
battery charge function, the mobile phone should be placed
in the adapter.
Inserting the phone
– Place the phone in the mobile phone adapter Ÿfig. 4.
– Press the phone into the lock on the adapter.
Removing the phone
– Press the release button Ÿfig. 5
– Lift the phone out.
WARNING
Check that the phone has engaged properly. In the event of an accident, a
phone which has not engaged correctly could be flung out of the adapter
unit and injure the driver or passengers.
Fig. 4 Inserting the
phone
Fig. 5 Removing the
phone
AA
