2006 RENAULT SCENIC air condition

MULTIMEDIA
Diagnostic - Fault finding chart86C
86C-70
NAV 4R
Program no.: 0000
Vdiag No.: 24
ALP 5 CD read fault
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Ensure there are no present or stored faults.
Use the Wiring Diagram Technical Note for the vehicle concerned.
Is the fault related to CD reading by the radio/
navigation computer or by the 6CD changer?
By the radio/navigation computer By the 6CD changer
Is the CD an MP3 CD?
Yes
Check that component 261 (commercial vehicle:
662) is compatible with MP3 CDs (see "MP3" logo
on keypad).
Yes
Try with another MP3 CD.
Has the fault disappeared?
Yes
The faulty CD is in poor condition or is not
compatible (only MP3 format is compatible).
No
NoEnd of fault finding.
NoContact the Techline.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
NAV4R_V24_ALP5

MULTIMEDIA
Diagnostic - Fault finding chart86C
86C-71
NAV 4R
Program no.: 0000
Vdiag No.: 24
ALP 5
CONTINUED 1
Is the CD an audio CD?
Yes No
Try with another audio CD. Has the fault
disappeared?
Yes No
The faulty CD is in poor
condition or is not compatible.
The CD is not compatible - End of fault finding.
Contact the
Techline.
AFTER REPAIRCarry out a complete check with the diagnostic tool.

MULTIMEDIA
Diagnostic - Fault finding chart86C
86C-72
NAV 4R
Program no.: 0000
Vdiag No.: 24
ALP 5
CONTINUED 2
Is the CD an audio CD?
Yes No
Try with another audio CD. Has the fault
disappeared?
Yes No
The faulty CD is in poor
condition or is not compatible.
Is the CD a cartographic map CD?
Yes No
Is the cartographic map CD
"Carminat Advanced
Navigation 2" compatible?
(original version).
Contact the
Techline.
The CD is not
compatible - End of
fault finding.
AFTER REPAIRCarry out a complete check with the diagnostic tool.

MULTIMEDIA
Diagnostic - Fault finding chart86C
86C-75
NAV 4R
Program no.: 0000
Vdiag No.: 24
ALP 8The radio does not switch on automatically
or switches off after 20 minutes
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Ensure there are no present or stored faults.
Do not apply the following fault finding procedure to the Laguna II ph2.
Use the Wiring Diagram Technical Note for the vehicle concerned.
Check the condition of the + 12 V ACC feed fuse of
component 261 (Trafic: 662).
To obtain the fuse value, see Wiring Diagrams
Technical Note or the value indicated on the fuse
box.
Does the radio come on?
No
Check for + accessories feed. To do this, refer to
the interpretation of status ET002 + 12 V
accessories feed.
Has the fault been solved?
No
Contact the Techline.
YesEnd of fault finding.
Yes
AFTER REPAIRCarry out a complete check with the diagnostic tool.
NAV4R_V24_ALP8

MULTIMEDIA
Diagnostic - Fault finding chart86C
86C-78
NAV 4R
Program no.: 0000
Vdiag No.: 24
ALP 11 The 6 CD changer does not work
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Ensure there are no present or stored faults.
Use the Wiring Diagram Technical Note for the vehicle concerned.
Disconnect then reconnect component 1272.
Does the CD changer request its code?
("CD 0000")
No
Check the condition and connection of the connector of components 261 (Trafic: 662) and 1272.
If the connector is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Has the fault been solved?
No
With the radio switched on, check for + battery feed
on connection 34BC and + accessories feed on
connection 34BD of the connector of
component 1272.
Are the + battery and + accessories feeds
present?
Yes
Contact the Techline.
YesRefer to ALP 10 The screen displays
"CD0000".
NoCheck the continuity, insulation and
the absence of interference resistance
on connections 34BC, 34BL and 34BD
between components 261 (Trafic: 662)
and 1272.
Yes Are the connections correct?
No
If the connection or connections are faulty and there is a
repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the
wiring, otherwise replace it.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
NAV4R_V24_ALP11