2006 NISSAN XTERRA display

MAP SCALEThe following scales are available depending on
the map view.. In Plan View:
Widest (1/51,200,000) to the most detailed
(1/5,000)
. In Birdview
TM:
Widest (1/20,480,000) to the most detailed
(viewpoint height at 1/25,000)
Scale level of the Plan View display
Map scale Actual distance
1:51.2 million 400 miles (640 km)
1:5.12 million 32 miles (64 km)
1:1.28 million 8 miles (16 km) 1:320,000 2 miles (4 km)
1:160,000 1 mile (2 km)1:80,000 1/2 mile (1 km)
1:40,000 1/4 mile (500 m)
1:20,000 1/8 mile (200 m)
1:10,000 1/16 mile (100 m)
1:5,000 1/32 mile (50 m)
NAV2755
Example: The most detailed level
NAV2756
Example: The widest level
Map settings
3-13

Scale level of the Birdview
TM
display
Map scale Distance between grids1:20.48 million 160 miles (256 km)1:5.12 million 32 miles (64 km)
1:2.56 million 16 miles (32 km)
1:1.28 million 8 miles (16 km) 1:640,000 4 miles (8 km)
1:320,000 2 miles (4 km)
1:160,000 1 mile (2 km)1:80,000 1/2 mile (1 km)
1:40,000 1/4 mile (500 m)
1:25,000 1/6 mile (250 m)
NAV2757
Example: The most detailed level
NAV2758
Example: The widest level
3-14
Map settings

Other settings are also available for the map
screen, such as changing the map direction,
splitting the screen, etc.SETTINGS OF HEADING/LONG
RANGE MAP VIEWYou can change the map direction (orientation)
in Plan View or change the position of the
vehicle icon to view a wider area in the traveling
direction.
These settings are available only in the Plan
View or Split (Plan View) mode.
NAV2711
1. Push while the current location
map screen is displayed.
NAV2759
2. Highlight [Heading] and push
.
OTHER SETTINGS FOR THE MAP
SCREEN
Map settings
3-15

NAV2760
3. Highlight the preferred map orientation andpush . The indicator of the
selected map orientation illuminates.
INFO:
[Long Range Map View] is displayed only
when you select [Heading Up].
4. Push

NAV2763
Long Range Map View
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.: North Up: Heading Up
NAV2764
INFO:
You can also set the orientation of the map using
the following procedure.
1) Push .
2) Highlight [Navigation] and push
.
3) Highlight [Heading] and push .
CHANGING THE BIRDVIEW
TM
ANGLE
This changes the Birdview
TM
angle.
This setting is available only in the Birdview
TM
or
Split (Birdview
TM) mode.
Map settings
3-17

NAV2711
1. Push while the current location
map screen is displayed.
NAV2759
2. Highlight [Heading] and push
.
NAV2765
3. Highlight [Birdview
TM
Angle] and push
.
INFO:
This setting is available only when the map
view is set to the Birdview
TM
or Split
(Birdview
TM) mode.
3-18
Map settings

CHANGING THE SCALE OF THE LEFT
SCREENWhen the split screen is displayed, you can
change the scale of the left screen.
NAV2711
1. Push while the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push
.
3-20
Map settings

NAV2767
3. Highlight [Change Map Scale for Left] andpush .
INFO:
[Change Map Scale for Left] is displayed
only when the map view is in the Split (Plan
View) or Split (Birdview
TM) mode.
NAV2768
4. Highlight [Map Scale] and push
.
Adjust the map scale by moving the cursor
in the direction of [+] or [ ].
Use the joystick to adjust the scale of the
map.
After finishing the setup, push
or
/
to apply the scale
setting.
5. Push