2006 NISSAN ARMADA maintenance

[x] Cancel search: maintenance

Page 278 of 352

NISSAN ARMADA 2006 1.G Owners Manual BRAKE FLUID
Check the brake fluid level in the reservoir. If the
fluid level is below the MIN line or the brake
warning light comes on, add Genuine NISSAN
Super Heavy Duty Brake Fluid or equivalentDOT

Page 279 of 352

NISSAN ARMADA 2006 1.G Owners Manual cKeep the battery surface clean and dry. Any
corrosion should be washed off with a solu-
tion of baking soda and water.
cMake certain the terminal connections are
clean and securely tightened.
cIf the

Page 280 of 352

NISSAN ARMADA 2006 1.G Owners Manual 2. Check the fluid level in each cell If it is
necessary to add fluid, add only distilled
water to bring the level up to the bottom of
the filler opening.Do not overfill.Vehicles operated in high temp

Page 281 of 352

NISSAN ARMADA 2006 1.G Owners Manual 1. Visually inspect the belt(s) for signs of un-
usual wear, cuts, fraying or looseness. If the
belt is in poor condition or is loose, have it
replaced or adjusted by a NISSAN dealer.
2. Have the belt

Page 282 of 352

NISSAN ARMADA 2006 1.G Owners Manual The air cleaner filter should not be cleaned and
reused. Replace it according to the maintenance
log shown in the “NISSAN Service and Mainte-
nance Guide.” When replacing the filter, wipe the
insi

Page 283 of 352

NISSAN ARMADA 2006 1.G Owners Manual 2. Remove the filter cover bolt and remove the
filter cover.NOTE:
The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
shou

Page 284 of 352

NISSAN ARMADA 2006 1.G Owners Manual CLEANING
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Clean the outside of the

Page 285 of 352

NISSAN ARMADA 2006 1.G Owners Manual If you wax the surface of the hood, be careful not
to let wax get into the washer nozzle
s1. This may
cause clogging or improper windshield washer
operation. If wax gets into the nozzle, remove it
wit