2006 NISSAN ARMADA Navigation Manual

AVOID AREA SETTINGSAn Avoid Area can be stored.
The Avoid Area is an area that you want to
exclude from a route, such as a road that is
always congested.
Once you store Avoid Areas, the system avoids
those areas when calculating a route.
Up to 5 Avoid Areas can be stored.
1. Push .
NAV3055
Armada, Maxima, Murano, Pathfinder, Quest, Titan
NAV3029
350Z2. Highlight [Navigation] and push

.
NAV2936
3. Highlight [Avoid Area Settings] and push
.
INFO:
You can also access and store an Avoid
Area from the Address Book.
Storing a location/route
6-7

NAV2937
4. Highlight [None (Add New)] and push .
INFO:
A maximum of 5 Avoid Areas can be stored.“DELETING A STORED ITEM”
(page 6-28)
NAV2938
5. Highlight the appropriate method to search for a location and push .
“4. Setting a destination”
NAV2939
6. Set the following items for the searched
location.
Available setting items
.
Rename
.
Alter Location
.
Resize Area
.
FWY
.
Delete
7. After finishing the setting, highlight [OK] and push
.
6-8
Storing a location/route

NAV2940
Rename1. A character input screen is displayed.
2. Enter the preferred name.
3. Highlight [OK] and push.
NAI0419
Alter Location1. Using the joystick, adjust the location of the
Avoid Area.
2. After adjusting the location, push .
Storing a location/route
6-9

NAV2941
Resize AreaSelect the range from 5 available levels.
After selecting the range, push.
INFO:
Push (
)or

(
) to change the scale of the map.
6-10
Storing a location/route

NAV2942
FWYIf you want to include freeways in the Avoid
Area, push to illuminate this indica-
tor.
NAV2943
The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include freeways.
INFO:
If you set an Avoid Area at the current vehicle
location, the system will not provide route
guidance.
Storing a location/route
6-11

A calculated route can be stored.
A maximum of 5 routes can be stored.
Stored routes can be easily retrieved and set as
the suggested route.
INFO:
Stored route includes only locations (destination
and waypoints) and route calculation conditions,
not the route itself.
1. Push .
NAV2944
2. Highlight [Change/Edit Route] and push
.
NAV2945
3. Highlight [Store Current Route] and push
.
STORING A ROUTE6-12
Storing a location/route

NAV2946
4. A confirmation message is displayed. Con-firm the contents of the message, highlight
[Yes] and push .
The current route is stored.
NAV2947
INFO:
You can also store a route using the following
procedure.
1) Push .
2) Highlight [Navigation] and push
.
3) Highlight [Address Book] and push .
4)Highlight[StoredRoutes]andpush .
5) Highlight [None (Add New)] and push .
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored.
“DELETING A STORED ITEM”
(page 6-28)
. If you have not set any waypoints on the
route, the route cannot be stored.
Storing a location/route
6-13

You can store the route you have traveled up to
the current location. A maximum of 5 tracked
routes can be stored.
A tracked route must not exceed 12 miles (20
km) in distance.
The stored tracked route can be displayed on
the map as necessary.
1. Push .
NAV2948
2. Highlight [Store Tracking] and push
.
INFO:
A maximum of 5 tracked routes can be
stored.“DELETING A STORED ITEM”
(page 6-28)
NAV2949
3. A confirmation message is displayed. Confirm the contents of the message, high-
light [Yes] and push .
The tracked route you have traveled is
stored.
4. Push