TRAILING ARM ASSEMBLY REAR SUSPENSION34-12 TRAILING ARM ASSEMBLY REMOVAL AND INSTALLATIONM1341002200594 CAUTION *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the earth in the unladen condition. Pre-removal Operation •Brake Fluid Draining •Rear Hub Assembly Removal (Refer to GROUP 27, Rear Axle Hub Assembly P.27-5). Post-installation Operation •Rear Hub Assembly Installation (Refer to GROUP 27, Rear Axle Hub Assembly P.27-5). •Brake Fluid Supplying and Bleeding (Refer to GROUP 35A, On-vehicle Service − Bleeding P.35A-6). •Rear Wheel Alignment Check and Adjustment (Refer to P.34-6). •Parking Brake Lever Stroke Ad justment (Refer to GROUP 36, On-vehicle Service − Parking Brake Lever Stroke Check and Adjustment P.36-3). AC101449 AC301223 AC304155 AB 90 ± 10 N·m* 120 ± 10 N·m* 95 ± 15 N·m*63 ± 7 N·m 6 7 8 1 10 11 23 4 120 ± 10 N·m* 15 ± 2 N·m N 9 5 Removal steps <>•Lifting point 1.Rear ABS Sensor (Refer to GROUP 35B, ABS Sensor P.35B-68). 2.Parking brake cable 3.Brake hose and trailing arm connection 4.Rear parking brake assembly >>A<<5.Lower arm assembly and stabilizer link connection 6.Lower arm assembly and shock absorber connection 7.Control link and trailing arm connection 8.Upper arm assembly and trailing arm connection Removal steps (Continued)
