Removal steps >>B<<1.Stabilizer link connection <>2.Lower arm bolt 3.Coil spring nut 4.Coil spring bolt >>A<<5.Shock absorber assembly SHOCK ABSORBER ASSEMBLY REAR SUSPENSION34-15 REMOVAL SERVICE POINT <> LOWER ARM BOLT REMOVAL AC107126AB Piece of wood After suppo rting the lo we r arm with a jack, remove the lo we r arm b o lt. INSTALLA T ION SER VICE POINT S >>A<< SHOCK ABSORBER ASSEMBL Y INST ALLA TION AC304795 AB Spring seat stepped section Rear of the vehicle Install the sprin g se at ste pped section so th at it point s towards the rea r side of th e ve hicle. >>B<< STABILIZER LINK INST ALLA TION AC103744 A AC Ti ghten the self-locking nut un til t he st ab ilizer link thread p a rt protrud i ng length mee t s the st a ndard value. St andard va lue (A): 6 − 8 mm INSPECTIONM13410026 0015 0 •Check the rubbe r p a rt s for cracks a nd wear . •Check the sho c k abso r ber for malfunct i ons, oil le akag e, or a bnormal no ise .
Removal steps 1.Pressure switch connector 2.A/C compressor harness connector bracket 3.Drive belt 4.Suction hose 5.Eye bolt 6.O-ring 7.Pressure hose 8.Oil pump assembly 9.Oil pump brace POWER STEERING OIL PUMP ASSEMBLY POWER STEERING37-36 <2000> AC200116AB 22 ± 4 N·m 12 ± 2 N·m 22 ± 4 N·m 49 ± 9 N·m 57 ± 7 N·m 1 5 4 3 6 2 7 49 ± 9 N·m Removal steps 1.Pressure switch connector 2.Drive belt 3.Suction hose 4.Pressure hose <>5.Oil pump assembly 6.A/C compressor harness 7.Power steering pump bracket REMOVA L SER VICE POINT <> OIL PUMP ASSEMBL Y REMOV A L <2000> With the eng ine lif t ed by the jack, remove the o il pump assembly mounting b o lt (lower side) a t the pul - ley side . INSPECTIONM13720053 0018 7 •Check the drive belt for cracks. •Check th e pulley for une ven r o t a tion. Remova l st ep s ( C ont inu e d)
