2006 Mercury Grand Marquis Owner's Manuals

Page 97 of 272

Mercury Grand Marquis 2006  Owners Manuals 1. Insert the first previously
programmedcoded keyinto the
ignition and turn the ignition from
1 (OFF/LOCK) to the 3 (ON)
position (maintain ignition in 3 (ON)
for at least one second).
2. Turn igniti

Page 98 of 272

Mercury Grand Marquis 2006  Owners Manuals The system is ready to arm whenever the key is out of the ignition. Any
of the following actions will arm the alarm system:
•Press the remote transmitter lock control one time to arm the system.
•

Page 99 of 272

Mercury Grand Marquis 2006  Owners Manuals SEATING
Adjustable head restraints
Head restraints help to limit head motion in the event of a rear collision.
To properly adjust your head restraints, lift the head restraint so that it
is located di

Page 100 of 272

Mercury Grand Marquis 2006  Owners Manuals Lift handle to move seat forward or
backward.
Pull lever up to adjust seatback.
Before returning the
seatback to its original
position, make sure that cargo or
any objects are not trapped
behind the s

Page 101 of 272

Mercury Grand Marquis 2006  Owners Manuals To adjust the front seatback using
the manual recliner:
•Lift and hold the handle located
on the side of the seat.
•Lean against the seatback to
adjust it to your desired position.
You can recline

Page 102 of 272

Mercury Grand Marquis 2006  Owners Manuals To reduce the risk of possible serious injury: Do not hang objects
off seat back or stow objects in map pocket (if equipped) when
a child is in the front passenger seat. Do not place objects underneat

Page 103 of 272

Mercury Grand Marquis 2006  Owners Manuals Press to move the front portion of
the seat cushion up or down.
Press to move the rear portion of
the seat cushion up or down.
Using the power lumbar support (if equipped)
The power lumbar control is

Page 104 of 272

Mercury Grand Marquis 2006  Owners Manuals •Push the indicated side of the
control for minimum heat.
•Push again to deactivate.
The heated seat module resets at every ignition run cycle. While the
ignition is in the ON position, activating