2006 MERCEDES-BENZ SL-Class change time

7
Where to find it
Introduction

Where to find it
This Operator’s Manual is designed to pro-
vide support information for you, the
COMAND operator. Each chapter has its
own guide color to provide fast access to
information.
At a glance
Here you will find an overview of
all COMAND control elements and system
components. If you are operating
COMAND for the first time or if you have
rented or borrowed the vehicle, this is the
chapter you should read first.
Audio
Here you will find all the information on
how to use the radio, CD player (CD,
MP3-CD), CD changer* and DVD drive.
Satellite radio*
This chapter provides information on how
to select a station and a program category.
Telephone*
Here you can learn in detail about the
many functions of the telephone, how to
initiate an emergency call and use the pho-
ne book.
Navigation
This chapter provides detailed information
on the following topics:
Destination input
Route guidance including detour
Last destinations and destination
memory
POIs
Service
Here you will find all the information about:
SMS
Address book
Tele Aid*
System settings
This chapter provides information on how
to adjust COMAND system settings.
Directories
The glossary explains the most important
technical terms.
The table of contents and index directory
will help you quickly locate the information
you need.
230_Einleitung_US_B.fm Seite 7 Mittwoch, 8. Dezember 2004 3:27 15

37
Audio
Radio operation
You can use the following functions:
Automatic seek tuning (page 37)
Manual tuning (page 37)
Station selection from the Preset menu
(
page 37)
Station selection via direct frequency
entry (FM, AM) (
page 39)
Automatic station scan (FM, AM)
(
page 39)
Station selection from the FM/AM
Autostore presets (
page 43)
Automatic seek tuning
Press
g or h .
or
Press g or G .
FM and AM Bands, Weather Band (WB)
The radio will tune in to the next receivable
station (FM, AM) or channel (WB) with de-
scending/ascending frequency depending
on the direction of seek.
WB
Alternatively, you can select the channel
directly:
Press a number key 1 through 7. Manual tuning (FM, AM)
Activate the desired wave band
(
page 35).
Press
g or h longer than 2 se-
conds.
The function is active.
or
Press H or h .
The frequency will change by the tuning
increments for the respective
waveband each time one of the buttons
is pressed.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Selecting a station
i
The selected channel is not shown in
the status line.
230_Audio_US_B.fm Seite 37 Mittwoch, 8. Dezember 2004 4:28 16

46 Audio
CD operation
Playback locations for audio CDs are:
the CD drive in the COMAND
the CD changer*.
Differences regarding the CD mode depen-
ding on the audio source are highlighted.
In the Audio menu (page 34), press
the
CD soft key (for CD drive) or
the
CD soft key (for CD changer*).
CD changer* main menu
1 CD changer* CD or CD drive
CD
2Current track/number of tracks on the
current CD
3 Elapsed playback time of the current
track
CD drive
CD changer*Switching to CD operation
i
The CD-Mag soft key is only assigned
when the CD changer* is active.
The
Sound soft key appears if the
COMAND is provided with sound
functions* (
page 31).
i
The CD drive in the COMAND can
playback audio CDs, MP3-CDs
(
page 55). The slot of the drive is
above the display.
i
The CD changer* can accomodate up
to 6 audio CDs. It is located on the left-
hand side behind the driver’s seat.
Loading CDs
WarningG
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
i
The COMAND may be unable to
playback audio CDs provided with copy
protection.
230_Audio_US_B.fm Seite 46 Mittwoch, 8. Dezember 2004 4:28 16

49
Audio
CD operation
CD changer* main menu
If the last played CD is not available, the
next available audio CD is played back. No magazine in the CD changer*:
The message
No Magazine will appear.
Load audio CDs into the CD changer*
(
page 47).
No CD in the magazine:
The message
Magazine Empty will
appear.
Load audio CDs into the CD changer*
(
page 47).
You can select a CD:
in the CD list (page 49)
with the number keypad (page 50)
in the Magazine menu (page 50) In the CD list
The CD list includes all loaded CDs. Only
one list entry is visible at a time.
The entry is displayed above the track
indication. It shows the number or the
name of the CD currently playing.
Use
h or H to select another CD
from the list.
After the CD is loaded, it is played
back.
or
Do not change the selection.
Playback of the last played CD is
continued.
i
The name of the CD and the track
played are displayed if the information
is available.
Selecting a CD (CD changer* only)
i
Selection is possible if the
CD changer* has loaded the magazine
and at least two audio CDs are loaded.
230_Audio_US_B.fm Seite 49 Mittwoch, 8. Dezember 2004 4:28 16

56 Audio
MP3-CD operation
Treat MP3-CDs with care to prevent
malfunctions during playback.
Do not scratch, touch or soil your MP3-
CDs.
Do not attach labels to or write on your
MP3-CDs.
From time to time, clean your MP3-CDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.
After use, put your MP3-CDs into the
CD box.
Protect your MP3-CDs from high
temperatures and direct sunlight.
Activate the MP3-CD main menu
(
page 57).
or
Load an MP3-CD into the COMAND
(
page 56).
CD drive
Loading an MP3-CD
Insert a MP3-CD into the slot
(
page 14). The MP3-CD should be
inserted with the label side up.
The COMAND pulls the MP3-CD into
the drive. The display changes.
Tips on caring for your MP3-CDsSwitching to MP 3-CD operation
i
The MP3-CDs are played in the same
drive as normal audio CDs.
The MP3-CD drive is above the display.
WarningG
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
WarningG
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
i
A CD already loaded must be ejected
before inserting a new MP3-CD.
Inserting a second MP3-CD with
another CD still loaded will cause
damage to the CD drive which is not
covered by the Mercedes-Benz Limited
Warranty.
230_Audio_US_B.fm Seite 56 Mittwoch, 8. Dezember 2004 4:28 16

64 Audio
DVD operation
From time to time, clean your DVDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.
After use, put your DVDs into the DVD
box.
Protect your DVDs from high
temperatures and direct sunlight.
Load a video DVD into the COMAND
(
page 65).
or
If a DVD is already loaded, open the Au-
dio menu (
page 34) and press the
DVD soft key.
If the video DVD meets the playback re-
quirements, playback will begin. If avai-
lable, the DVD menu (
page 70) saved
on the DVD will appear.
DVD playback requirements
i
Vendors may offer DVDs which do not
comply with the standards.
Sound, picture and other playback
problems may occur when you play
such DVDs.
The COMAND can playback video
DVDs meeting the following
requirements:
Regional code is set (factory
setting)
NTSC or PAL TV standard
The appropriate information is usually
given either on the DVD or the DVD
box. The factory setting of the
COMAND is regional code 1. The
setting can be changed at an
authorized Mercedes-Benz Center. This
will allow you to playback video DVDs
with other regional codes, as long as
they comply with the NTSC or PAL TV
standard.
i
The COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video
function is disabled and no images will
be shown on the COMAND screen.
Switching to DVD operation
230_Audio_US_B.fm Seite 64 Mittwoch, 8. Dezember 2004 4:28 16

68 Audio
DVD operation
Pause or Play soft key:
Switches the Pause function on or off
(
page 68).
Stop soft key:
Stops the DVD playback (
page 69).
Full Scr. soft key:
The soft key display disappears
(
page 69).
Menu soft key:
Displays the DVD menu saved on the
DVD, if available (
page 70).
Setting soft key:
Displays the DVD settings menu
(
page 71).
Sound soft key:
Brings you to the sound menu, where
you can set:
Balance (page 29)
Bass and Treble (page 30)
Sound functions* (page 31)
Bright., Contr. and Color soft
key
s:
Allow you to adjust brightness, cont-
rast and color (
page 74). Pause function
Display the soft keys (page 67).
Press the
Pause soft key.
DVD playback is paused. The picture
stands still. The
Pause soft key
changes to
Play.
To resume playback, press the Play
soft key.
Playback of the DVD will resume.
Soft key functions
i
Depending on the DVD, not all func-
tions are available at any time.
230_Audio_US_B.fm Seite 68 Mittwoch, 8. Dezember 2004 4:28 16

71
Audio
DVD operation
You can also proceed as follows:
Display the soft keys (page 67).
Press the
Menu soft key once or several
times.
With each depression of the soft key
you will move up one or several menu
levels (depending on the DVD) until the
topmost level is reached.
Removing DVD menu
A DVD menu or a submenu may include an
item for closing the DVD menu.
Select the appropriate menu item
(
page 70).
You can also proceed as follows:
Display the soft keys (page 67).
Press the Back soft key.
or
Press the Stop soft key.
DVD playback is stopped and the DVD
menu is opened.
Settings menu
Setting options:
4:3, 16:9 or Zoom soft key:
You can change the aspect ratio
(
page 72).
Lang. soft key:
You can change the DVD language
(
page 72).
Subtitle soft key:
You can display and switch between
the subtitles (
page 73).
Angle soft key:
You can change the camera view
(
page 74).
Activating the Settings menu
Display the soft keys (page 67).
Press the Setting soft key.
The Settings menu will appear.
Settings menu
230_Audio_US_B.fm Seite 71 Mittwoch, 8. Dezember 2004 4:28 16