2006 MERCEDES-BENZ E350 panora

239 Controls in detail
Panorama roof with power tilt/sliding panel*
Panorama roof with power tilt/sliding panel*
Opening and closing the roller
sunblinds for the panorama roof with power tilt/sliding panel
The tilt/sliding panel and the front and
rear roller sunblinds are opened and
closed electrically. The switch for the
tilt/sliding panel and the roller sunblinds is
on the overhead control panel. An addi-
tional switch for the roller sunblinds is in
the rear passenger compartment.
The roller sunblinds only operate with the
tilt/sliding panel closed. The front and rear
roller sunblind cannot be operated individ-
ually.
Roof panel switch1Open roller sunblinds
2Close roller sunblinds
Roller sunblinds switch, rear 1Open roller sunblinds
2Close roller sunblinds
Switch on the ignition (
page 36).
Opening and closing the roller sun-
blinds

To open or close the roller sunblinds,
move the roof panel/roller sunblinds
switch to the resistance point in the re-
quired direction of arrow1 or2.
Release the roof panel/roller sunblinds
switch when the roller sunblinds have
reached the desired position.


240 Controls in detailPanorama roof with power tilt/sliding panel*Fully opening the roller sunblinds (Ex-
press-open)
Move the roof panel/roller sunblinds
switch past the resistance point in di-
rection of arrow1 and release.
The roller sunblinds opens completely.
Stopping the roller sunblinds during
Express-operation

Move the roof panel/roller sunblinds
switch in any direction.Opening and closing the panorama roof
with power tilt/sliding panel
The tilt/sliding panel is opened and closed
electrically. The switch for the tilt/sliding
panel is on the overhead control panel.
The tilt/sliding panel only operates with
the roller sunblinds opened.Roof panel switch1Push back to slide roof panel open
2Push forward to slide roof panel closed
3Push up to raise roof panel
4Pull down to lower roof panel
Warning!
G
When closing the roller sunblinds, make
sure that no one is in danger of being injured
by the closing procedure. The closing of the
roller sunblinds can be immediately halted
by releasing the switch.
Warning!
G
When opening or closing the tilt/sliding pan-
el, make sure that there is no danger of any-
one being harmed by the opening or closing
procedure.
The opening procedure of the tilt/sliding
panel can be immediately halted by releas-
ing the switch or, if the switch was moved
past the resistance point and released, by
moving the switch in any direction.
The closing procedure of the tilt/sliding
panel can be immediately halted by releas-
ing the switch.
The panorama roof with power tilt/sliding
panel is made out of glass. In the event of an
accident, the glass may shatter. This may re-
sult in an opening in the roof.


241 Controls in detail
Panorama roof with power tilt/sliding panel*

Switch on the ignition (
page 36).Opening and closing the panorama roof
with power tilt/sliding panel

To open, close, raise, or lower the
tilt/sliding panel, move the roof panel
switch to resistance point in the re-
quired direction of arrows1 to4.
Release the roof panel switch when the
tilt/sliding panel has reached the de-
sired position.
Fully opening (Express-open) the pan-
orama roof with power tilt/sliding pan-
el

Move the roof panel switch past the re-
sistance point in direction of arrow1
and release.
The tilt/sliding panel opens
completely.
Stopping the panorama roof with power
tilt/sliding panel during Express-open

Move the roof panel switch in any di-
rection.
In a vehicle rollover, occupants not wearing
their seat belts or not wearing them properly
may be thrown out of the opening. Such an
opening also presents a potential for injury
for occupants wearing their seat belts prop-
erly as entire body parts or portions of them
may protrude from the passenger compart-
ment.
When leaving the vehicle, always remove the
SmartKey or the SmartKey with
KEYLESS-GO* from the starter switch, take
it with you, and lock the vehicle. Do not
leave children unattended in the vehicle, or
with access to an unlocked vehicle. Unsu-
pervised use of vehicle equipment can
cause an accident and/or serious personal
injury.!To avoid damaging the seals, do not
transport any objects with sharp edges
which can stick out of the tilt/sliding
panel.
Do not open the tilt/sliding panel if
there is snow or ice on the roof, as this
could result in malfunctions.
The tilt/sliding panel can be opened or
closed manually should an electrical
malfunction occur (
page 429).
iYou can also open or close the tilt/slid-
ing panel using the SmartKey (summer
opening/convenience closing feature)
(page 234) or (
page 235).
Depending on current position, the
tilt/sliding panel may also open or
close when the air recirculation
button, in the control panel of the
climate control (
page 204),
(
page 216) or (
page 217) is
pressed and held.

242 Controls in detailPanorama roof with power tilt/sliding panel*Synchronizing the panorama roof with power tilt/sliding panel
The tilt/sliding panel must be
synchronized

after the battery has been
disconnected or discharged


after the tilt/sliding panel has been
closed manually (
page 429)


after a malfunction


if the tilt/sliding panel does not open
smoothly

Remove the fuse from the main fuse
box (
page 461).

Reinsert the fuse in the main fuse box.

Switch on the ignition (
page 36).

Move and hold the roof panel switch in
direction of arrow2 until the roller
sunblinds are fully closed.

Keep holding the roof panel switch in
direction of arrow2 for approximately
1 second.

Move and hold the roof panel switch in
direction of arrow1 until the roller
sunblinds are fully opened.

Keep holding the roof panel switch in
direction of arrow1 for approximately
1 second.

Move and hold the roof panel switch in
direction of arrow3 until the tilt/slid-
ing panel is fully raised.

Keep holding the roof panel switch in
direction of arrow3 for approximately
1 second.

Move and hold the roof panel switch in
direction of arrow2 until the tilt/slid-
ing panel is fully closed.

Keep holding the roof panel switch in
direction of arrow2 for approximately
1 second.

Check the Express-open feature of the
tilt/sliding panel (
page 241).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized. Other-
wise repeat the above steps.

370 OperationVehicle careCleaning the panorama roof with power
tilt/sliding panel
The rear part of the tilt/sliding panel has a
protective layer on the inside. 
Use a soft, clean cloth and a mild win-
dow cleaning solution.
An automotive glass cleaner is recom-
mended.Light alloy wheels
If possible, clean wheels once a week.

Use Mercedes-Benz approved Wheel
Care, a soft bristle brush and a strong
spray of water for cleaning the light al-
loy wheels.
Plastic and rubber parts

Use a gentle dishwashing detergent or
mild detergent for delicate fabrics as a
washing solution.
Instrument cluster and cup holders

Use a gentle dishwashing detergent or
mild detergent for delicate fabrics as a
washing solution.

Wipe with a cloth moistened in a luke-
warm solution.
!Do not use a dry cloth, abrasives, sol-
vents or cleaners containing solvents.
Do not touch the protective layer with
hard objects such as an ice scraper or
ring. Never apply strong force and only
use a soft, non-scratching cloth when
cleaning the rear part of the tilt/sliding
panel.
Otherwise you may scratch or damage
the protective layer.
!Only use acid-free cleaning materials.
Acid may cause corrosion or damage
the clear coat.!The vehicle should not be parked for an
extended period of time immediately
after it has been cleaned, especially not
after the wheel rims have been cleaned
with wheel rim cleaner. Wheel rim
cleaners can lead to increased corro-
sion of the brake disks and brake pads.
Therefore, the vehicle’s brake system
should always be warmed-up before it
is parked after cleaning. To do so,
please drive your vehicle for several
minutes to allow the brakes to dry.
When applying Mercedes-Benz ap-
proved Tire Care and Mercedes-Benz
approved Wheel Care products, take
care not to spray them on the brake
disks. !Do not use oil or wax on these parts.!To prevent scratches, do not use scour-
ing agents.

429 Practical hints
Opening/closing in an emergency
Opening/closing in an emergency
Power tilt/sliding sunroof* or panora-ma roof with power tilt/sliding panel*
You can open or close the tilt/sliding sun-
roof or tilt/sliding panel manually should
an electrical malfunction occur.
The tilt/sliding sunroof or tilt/sliding panel
drive is located behind cover1 of the in-
terior overhead light.
1Cover
Remove the SmartKey from the starter
switch.

Press on cover1 in direction of the ar-
row to release it.2Hole
3Crank

Take crank3 out of the glove box.

Insert crank3 through hole2.

Turn crank3 clockwise to:

slide roof panel/sunroof closed


raise roof panel/sunroof at the rear

Turn crank3 counterclockwise to:

slide roof panel/sunroof open


lower roof panel/sunroof at the
rear
iTurn crank3 slowly and smoothly.
The tilt/sliding sunroof or tilt/sliding
panel must be synchronized after being
operated manually (
page 238) or
(
page 242).

509 Index
K
Key, Mechanical 426
Key, SmartKey
Battery check lamp 106
Changing batteries 431
Factory setting 108
Locking/unlocking 34
Locking/unlocking, Global
setting 108
Locking/unlocking, Selective
setting 108
Loss of 110
Messages in display 411
Opening and closing the power
tilt/sliding sunroof* or panorama
roof with power tilt/sliding
panel* 234
Opening and closing the
windows 234
Positions in starter switch 36
Remote control 106
Starting the engine 50
Turning off engine 62Key, SmartKey with KEYLESS-GO*
Battery check lamp 111
Changing batteries 431, 432
Factory setting 114
Locking, Trunk lid 114
Locking/unlocking 35
Locking/unlocking, Selective
setting 115
Loss of 118
Messages in display 410
Opening and closing the the power
tilt/sliding sunroof* or panorama
roof with power tilt/sliding
panel* 234
Opening and closing the
windows 234
Starting the engine 51
Turning off engine 62
Unlocking, Trunk lid 118
KEYLESS-GO* 495
KEYLESS-GO* see Key, SmartKey with
KEYLESS-GO*
Kickdown 186, 495
Kilopascal 354L
Labels
Certification 468
Emission control information 468
Emission control vacuum line
routing 468
Lamp sensor
Message in display 414
Lamps, exterior
Light sensor 414
Messages in display 412, 413, 414,
415
Lamps, indicator and warning
ABS 25, 374
Battery (SmartKey) 108, 115
Brakes 376
CHECK ENGINE 377, 378
Coolant 379
Distance warning lamp* 250
Electrohydraulic brake system 97
Engine diagnostics 377, 378
Engine malfunction 25, 377, 378
ESP
®
25, 375
Fog lamps 144
Front passenger front air bag off 27,
72, 384, 385

511 Index
Multifunction display 153, 496
Changing settings see Control system
menus and Control system sub-
menus
Selecting language 166
Multifunction display messages 388
ABS
Batteries 389, 398, 399
Brake fluid 402
Brake lamps 412
Brake pads 400
Check engine 377, 378
Coolant 403, 404, 405
Cruise control 389
Distronic* 389
Door 406
Electrohydraulic brake system 400,
401
Engine oil 321, 407, 408, 409
ESP
®
391, 392
Fog lamps 412, 413
Fuel reserve tank 411
Headlamps 412, 413, 414
Hood 410
Key, SmartKey 411Key, SmartKey with
KEYLESS-GO* 410
Panorama roof with power tilt/sliding
panel* 417
Parking brake 401
Parking lamps 413
Power tilt/sliding sunroof* 417
Seat belts 417
SRS 418
Telephone* 419
Tires 416
Trunk 419
Turn signals 415
Windshield washer fluid 419
Multifunction steering wheel 26, 154,
496
Button operation 154
N
Navigation system
See separate COMAND operating
instructions 161
Net, parcel 278
Neutral gear position 185
Night security illumination 144
Normal occupant weight 355Number, vehicle identification (VIN) 468
O
Occupant Classification System see OCS
Occupant distribution 355
Occupant safety 66
Air bags 67
Children and air bags 68
Children in the vehicle 78
Fastening the seat belt 47
Front passenger front air bag off indica-
tor lamp 85
Infant and child restraint systems 78
LATCH-type child seat anchors
OCS
Seat belts 47, 70
OCS
Self-test 86
Odometer 153
Oil level see Engine oil, Checking level
Oil see Engine oil
One-touch gearshifting 190
Operating safety 16
Ornamental moldings, Cleaning 367
Outside temperature see Displays
Overdue maintenance service 360, 361
Overhead control panel 29