2006 MERCEDES-BENZ E WAGON key

[x] Cancel search: key

Page 232 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 231 Controls in detail
Power windows
Power windows
Opening and closing the windows
The side windows are opened and closed 
electrically. The switches for all of the side 
windows are on the driver’

Page 233 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 232 Controls in detailPower windows

Switch on the ignition (
page 36).
Opening the windows

Press switch2 to 5 to the resistance 
point.
The corresponding window will move 
downwards until you rel

Page 235 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 234 Controls in detailPower windowsSummer opening feature
If the weather is warm, you can ventilate 
the vehicle before driving off by simulta-
neously:
opening the side windows

opening the tilt/sl

Page 236 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 235 Controls in detail
Power windows
Vehicles with KEYLESS-GO*:
Press and hold the lock button on an 
outside door handle (
page 63) until 
the windows and the tilt/sliding sun-
roof* are completely

Page 238 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 237 Controls in detail
Power tilt/sliding sunroof*

Switch on the ignition (
page 36).Opening and closing the power 
tilt/sliding sunroof

To open, close, raise or lower the 
tilt/sliding sunroof,

Page 257 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 256 Controls in detailDriving systems1Damping button
2Indicator lamps
Start the engine.

Press the damping button1 until the 
desired suspension style is set.Vehicle level control
Your vehicle autom

Page 260 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 259 Controls in detail
Driving systems
The button is located in the lower section 
of the center console.
1Vehicle level control button
2Indicator lamp 
Start the engine (
page 36).

Briefly press

Page 269 of 521

MERCEDES-BENZ E WAGON 2006 S211 Owners Manual 268 Controls in detailLoading
Insert one mounting element 2 into 
each cargo rail.

Turn mounting element 2 in cargo rail 
toN.

Insert telescoping rod 1 into mount-
ing element 2.

Turn mounting