2006 MERCEDES-BENZ CLK55AMG window

369 Operation
Vehicle care
Headlamps, tail lamps, side markers,
turn signal lenses
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water.Cleaning the Parktronic system*
(Canada only) sensors
1Parktronic system* sensors in front
bumper

Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean
sensors1 on the bumpers.
!Only use window cleaning solutions
that are suitable for plastic lamp lens-
es. Window cleaning solutions which
are not suitable may damage the plas-
tic lamp lenses of the headlamps.
Therefore, do not use abrasives, sol-
vents or cleaners that contain solvents.
Never apply strong force and only use a
soft, non-scratching cloth when clean-
ing the lenses. Do not attempt to wipe
dirty lenses with a dry cloth or sponge.
Otherwise you may scratch or damage
the lens surface.
!Do not apply strong pressure to the
sensor covers. Applying strong pres-
sure may damage the sensor covers.
Follow the instructions provided by the
power washer manufacturer on main-
taining a distance between the vehicle
and the nozzle of the power washer.!To prevent scratches, never apply
strong force and only use a soft,
non-scratching cloth when cleaning the
sensors. Do not attempt to wipe dirty
sensors with a dry cloth or sponge.

370 OperationVehicle careCleaning the windows and the wiper
blades
Fold the wiper arms forward until they
snapes into place.

Clean the wiper blade inserts with a
clean cloth and detergent solution.

Use a soft, clean cloth and a mild win-
dow cleaning solution on all outside
and inside glass surfaces.
An automotive glass cleaner is
recommended.Light alloy wheels
If possible, clean wheels once a week.

Use Mercedes-Benz approved Wheel
Care, a soft bristle brush and a strong
spray of water for cleaning the light al-
loy wheels.
Warning!
G
For safety reasons, switch off wipers and
remove SmartKey from starter switch
(vehicles with KEYLESS-GO*: Make sure the
vehicle's on-board electronics have status 0) before cleaning the windshield and/or
the wiper blades. Otherwise, the wiper mo-
tor could suddenly turn on and cause injury.
!Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch or
pressing the KEYLESS-GO start/stop
button (vehicles with KEYLESS-GO*).
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.!To clean the window interior, do not
use a dry cloth, abrasives, solvents or
cleaners containing solvents. Do not
touch the inside of the front, rear or
side windows with hard objects such as
an ice scraper or ring. Doing so may
damage the windows.
!Only use acid-free cleaning materials.
Acid may cause corrosion or damage
the clear coat.!The vehicle should not be parked for an
extended period of time immediately
after it has been cleaned, especially not
after the wheel rims have been cleaned
with wheel rim cleaner. Wheel rim
cleaners can lead to increased corro-
sion of the brake disks and brake pads.
Therefore, the vehicle’s brake system
should always be warmed-up before it
is parked after cleaning. To do so,
please drive your vehicle for several
minutes to allow the brakes to dry.

371 Operation
Vehicle care
Plastic and rubber parts
Use a gentle dishwashing detergent or
mild detergent for delicate fabrics as a
washing solution.
Instrument cluster and cup holders

Use a gentle dishwashing detergent or
mild detergent for delicate fabrics as a
washing solution.

Wipe with a cloth moistened in a luke-
warm solution.Hard plastic trim items

Use Mercedes-Benz approved Interior
Care, a soft, lint-free cloth and apply
with light pressure.
Steering wheel and gear selector lever

Wipe with a damp cloth and dry thor-
oughly or clean with Mercedes-Benz
approved Leather Care.
Carpets

Use Mercedes-Benz approved Carpet
and Fabric Care for cleaning the car-
pets.Headliner and shelf below rear window

Use a soft bristle brush or a dry-sham-
poo cleaner in case of excessive dirt.
Seat belts

Only use clear, lukewarm water and
soap. When applying Mercedes-Benz ap-
proved Tire Care and Mercedes-Benz
approved Wheel Care products, take
care not to spray them on the brake
disks.
!Do not use oil or wax on these parts.!To prevent scratches, do not use scour-
ing agents.
!To prevent scratches, do not use scour-
ing agents.
!The webbing must not be treated with
chemical cleaning agents. Do not dry
the webbing at temperatures above
176°F (80°C) or in direct sunlight.Warning!
G
Do not bleach or dye seat belts as this may
severely weaken them. In a crash they may
not be able to provide adequate protection.

426 Practical hintsOpening/closing in an emergency
Engage parking brake.

Lower the side windows.

Lower rear head restraints
(page 120).

For safety reasons, remove SmartKey
from starter switch.

Open the trunk.

Remove the trunk floor cover.

Take the two straps for soft top emer-
gency operation out of vehicle tool kit
(page 413).

Take hex wrench out of its storage
location in the storage well casing
(page 413).

Open the left side trim panel in the
trunk.1Locking mechanism

Pull locking mechanism1 out until it
stops and rotate it approx. one-quarter
of a turn.

Make sure the locking mechanism
does not retract again. If this happens,
pull the locking mechanism out again
and rotate it approx. one-quarter of a
turn.
iIf the rear head restraints cannot be
lowered using the rear head restraint
lowering switch, the roll bars may have
been released. For more information,
see “Operating roll bars manually”
(page 423).

432 Practical hintsOpening/closing in an emergencyeMaterial tensioning frame
fSoft top compartment cover
Lift material tensioning framee into a
vertical position.

Lower soft top compartment coverf.gSoft top base

With the palm of your hand, press the
window in material tensioning
framee until it is positioned on the
soft top compartment coverf.

You and your assistant should press
soft top compartment cover f for-
ward and down with the palms of your
hands until it snaps into place in the
guide. Place your hands on the areas
indicated by the arrows.
At the same time, gently press material
tensioning framee down with the
palms of your hands.
!Make sure the soft top compartment
coverf does not collide or make con-
tact with the material tensioning
framee.


455 Practical hints
Battery
Charging and reinstalling the battery
Charge battery in accordance with the
instructions of the battery charger
manufacturer.

Reinstall the charged battery. Follow
the previously described steps in
reverse order.
Reconnecting the battery
Turn off all electrical consumers.

Remove SmartKey from starter switch.
Vehicles with KEYLESS-GO*:
Press the start / stop button until
the engine shuts off.

Open the driver’s door.

Connect the battery positive lead and
fasten its cover3.

Connect the battery negative lead2.

Reinstall the filter box (
page 453).
Batteries contain materials that can harm
the environment if disposed of improperly.
Large 12-volt storage batteries contain
lead. Recycling of batteries is the preferred
method of disposal. Many states require
sellers of batteries to accept old batteries
for recycling.
Warning!
G
Never charge a battery while still installed in
the vehicle unless the accessory battery
charge unit* approved by Mercedes-Benz is
being used. Gases may escape during charg-
ing and cause explosions that may result in
paint damage, corrosion or personal injury.
An accessory battery charge unit* specially
adapted for Mercedes-Benz vehicles and
tested and approved by Mercedes-Benz is
available, permitting the charging of the bat-
tery in its installed position. Contact an au-
thorized Mercedes-Benz Center for
information and availability. Charge battery
in accordance with the separate instruc-
tions for the accessory battery charger*.
!The battery, its filler caps and the vent
tube must always be securely installed
when the vehicle is in operation.!NEVER invert the terminal connections!
iThe following procedures must be
carried out following any interruption of
battery power (e.g. due to reconnect-
ing):

Set the clock (
page 153).
Vehicles with COMAND*:
see COMAND operator’s manual.


Synchronize the side windows
(page 251).

495 Index
Carpets, cleaning 371
Catalytic converter 316
CD changer* 227
CD player 146, 227
Center console 27
Lower part 28
Upper part 27
Central locking
Automatic 117, 159
Locking/unlocking from inside 118
Central locking switch 118
Certification label 468
Charcoal filter 204
Children in the vehicle 75
Air bags 64
Blocking rear
side window operation 85
Front passenger front
air bag off indicator lamp 81
Infant and
child restraint systems 69, 75
LATCH-type child seat anchors 83
LATCH-type
child seat anchors design A 84
LATCH-type
child seat anchors design B 84Occupant Classification System
(OCS) 78
Cigarette lighter 286
Climate control see
climate control system 186
Climate control system
Air conditioning refrigerant 481
Air conditioning, Cooling 194, 206
Air distribution 190, 200
Air recirculation mode 192, 203
Air vents 195, 208
Air volume 190, 191, 201
Charcoal filter 204
Control panel,
Automatic climate control 197
Control panel, Climate control 187
Deactivating/Reactivating 189, 199
Defogging 202
Defrosting 201
Defrosting, Rear window 185
Front defroster 191
MAXCOOL 202
Residual engine heat
and ventilation* (REST*) 207
REST* 490
Temperature 190, 200Clock 25, 153, 154
Setting time 153, 154
Cockpit 22, 487
Cockpit Management and Data System
see COMAND*
Cold tire inflation pressure 355
Collapsible wheel chock 413, 416
COMAND* 487
COMAND* see separate
COMAND operating instructions
Combination switch 52, 131
Control system 139, 487
Functions 143
Multifunction display 140
Multifunction steering wheel 140
Resetting to factory default 148
Control system menus 142, 143, 489
AUDIO 145
NAV* 146
Settings 148
Settings, Submenus 149
Standard display 144
Submenus 141
TEL* 163
Trip computer 161
Vehicle status message memory 146

500 Index
Lamp sensor 405
Locator lighting 129
Low beam see Low beam headlamps
Manual headlamp mode 128
Messages in display 404–408
Night security illumination 129
Replacing bulbs 440, 443
Switch 52, 127
Headliner and shelf below rear window,
Cleaning and care of 371
Head-thorax air bag 68, 489
Heated seats* 122
High beam flasher 52, 131
Replacing bulbs
(Bi-Xenon*) 438, 442
Replacing bulbs
(Halogen) 438, 440
High beam headlamps 52, 131
Indicator lamp 25
Messages in display 405
Replacing bulbs
(Bi-Xenon*) 438, 439
Replacing bulbs
(Halogen) 438, 440
Replacing bulbs for high beam flasher
(Bi-Xenon*) 442Switching on 52, 131
High mounted brake lamp 439
Hood 321
Message in display 403
Horn 23
Hydroplaning 311
I
Identification labels 468
Identification number, Vehicle (VIN) 468
Ignition
with KEYLESS-GO* 36
with SmartKey 34
Immobilizer 92
Indicator lamps see
Lamps, indicator and warning
Infant and child restraint systems see
Children in the vehicle 75
Inflation pressure see
Tires, Inflation pressure
Inside door handle 30, 107
Instrument cluster 24, 136, 489
Cleaning 371
Illumination brightness 136
Lamps in 374–380
Messages in display see
Multifunction display messagesMultifunction display 140
Instrument lighting see Instrument cluster,
Illumination brightness
Instrument panel see Instrument cluster
Instruments and controls see Cockpit
Interior lighting 134
Delayed shut-off 159
Interior rear view mirror 43, 181
Antiglare position 181
Auto-dimming 182
Interior storage spaces see
Storage compartments
J
Jack 415
Jacking up the vehicle 447
Jump starting 456