2006 MAZDA MODEL MPV light

[x] Cancel search: light

Page 261 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (261,1)
8Maintenance and Care
How to keep your Mazda in top condition.
Introduction .................................................................................. 8-2
Introduction ....

Page 266 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (266,1)
qSchedule 2
Maintenance IntervalNumber of months or kilometers (miles), whichever comes first
Months 4 8 12 16 20 24 28 32 36 40 44 48
×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

Page 291 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (291,1)
NOTE
Tires degrade over time, even when
they are not being used on the road. It is
recommended that tires generally be
replaced when they are 6 years or older.
Heat caused by hot c

Page 292 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (292,1)
qReplacing a Wheel
WARNING
Using a Wrong-Sized Wheel:
Using a wrong-sized wheel is
dangerous. Braking and handling
could be affected, leading to loss of
control and an accident. Al

Page 293 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (293,1)
Light Bulbs
Some models.
Overhead light Overhead lights/Map lights
Parking lights
Headlights
Fog lights
Brake lights/Taillights
Rear turn signal lights
Reverse lights
Taillights/Re

Page 294 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (294,1)
WARNING
Handling Halogen Bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries could
be ca

Page 295 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (295,1)
NOTE
lIf the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
lUse the protective cover and carton
for the replacement bulb to dis

Page 296 of 364

MAZDA MODEL MPV 2006  Owners Manual (in English) Black plate (296,1)
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Remove the bulb by pushing it in
slightly and turning it
counterclockwise.
5. Install the new bulb in the re