STARTING AND DRIVING
436To turn the system off, push the “ON
−OFF” button. Make sure
the “CRUISE” indicator light is off.
If the conventional cruise control mode automatically cancels
out other than for the above cases, have your vehicle checked
by your Lexus dealer at the earliest opportunity.
(d) Resuming the conventional cruise control mode
If the conventional cruise control mode is temporarily
cancelled, the cruising speed can be resumed by pushing the
lever up in the “+ RES” direction.
Vehicle speed must be above 40 km/h (25 mph).
(e) Resetting to a faster speed
Push the lever up in the “+ RES” direction and hold it. Release
the lever when the desired speed is attained. While the lever
is held up, the vehicle will gradually gain speed.
When the difference between the actual vehicle speed and the
set speed is less than 5 km/h (3 mph), the set speed can be
increased 1.6 km/h (1 mph) each time by pushing the lever up
in the “+ RES” direction quickly within 0.6 seconds.
However, a faster way to reset is to accelerate the vehicle and
then push the lever down in the “ − SET” direction. (f) Resetting to a slower speed
Push the lever down in the “
− SET” direction and hold it.
Release the lever when the desired speed is attained. While
the lever is held down, the vehicle speed will gradually
decrease.
When the difference between the actual vehicle speed and the
set speed is less than 5 km/h (3 mph), the set speed can be
lowered 1.6 km/h (1 mph) each time by pushing the lever down
in the “− SET” direction quickly within 0.6 seconds.
However, a faster way to reset is to accelerate the vehicle and
then push the lever down in the “ − SET” direction.
With automatic transmission (standard type) —
Even if you downshift from “D” to “4” in the conventional cruise
control mode, engine braking will not be enabled because this
mode is not cancelled. To decrease the vehicle’s speed, reset
to a slower speed with the cruise control lever or depress the
brake pedal. If you use the brake pedal, cruise control is
cancelled.
With automatic transmission (multi −mode type) —
Even if you downshift from “D” or “5” (fifth range) to “4” (fourth
range) in the conventional cruise control mode, engine braking
will not be enabled because this mode is not cancelled. To
decrease the vehicle’s speed, reset to a slower speed with the
cruise control lever or depress the brake pedal. If you use the
brake pedal, cruise control is cancelled.
STARTING AND DRIVING
437
(g) Conventional cruise control mode failure warning
If there is trouble in the conventional cruise control mode, the
“CRUISE” indicator light in the instrument cluster flashes, the
master warning light comes on and the alarm sounds, the
warning code “E3” will appear on the display.
If a system malfunction is detected when the conventional
cruise control mode is in the ready mode or operating, the
master warning light comes on, an alarm sounds and the
above code appears.
If this code appears, press the “ON
−OFF” button to turn the
system off and then push it again to turn it on. If the setting still
cannot be made or the same code appears again, the system
might have malfunctioned. Although there is no problem to
continue driving, please contact your Lexus dealer.
ELECTRONICALLY MODULATED AIR SUSPENSION
1Easy access mode switch
2Height control switch
3Height select switch