2006 LEXUS RX330 reset

AUDIO
271
(c) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push the “SEEK” button. The radio will begin
seeking up
or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
Preset tuning: Push the button (1 — 6) for the station you
want. The button number (1 — 6) and station frequency
appear on the display.
Manual tuning: Turn the “TUNE” knob. The radio will step up
or down to another frequency.
To scan all the frequencies: Push the “SCAN” button briefly.
“SCAN” appears on the display. The radio will find the next
station up the band, stay there for a few seconds, and then
scan again. To select a station, push the “SCAN” button a
second time.
To scan the preset stations: Push the “SCAN” button until
you hear a beep. “SCAN” appears on the display. The radio
will tune in the next preset station up the band, stay there for
a few seconds, and then move to the next preset station. To
select a station, push the “SCAN” button a second time.

AUDIO
280(e) Repeating a track
“RPT” button: The repeat feature automatically replays the
current program.
Push the “RPT” button briefly while the track is playing.
“
” will appear on the display. When the track ends, it
will automatically be replayed. This process will be continued
until you push the button again to turn off the repeat feature. (f) Random playing
“RAND” button: Use for listening to the tracks on a CD in
random order.
Push
the “RAND” button briefly. “
” will appear on the
display and play the CD you are listening to in random order.
When a track is skipped or the system is inoperative, push the
button to reset.

AUDIO
290(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1 — 6) and
hold it until a beep is heard. This sets the station to the
button and the button number (1 — 6) appears on the
display.
Each
button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse. (c) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push the “SEEK” button. The radio will begin
seeking up
or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
Preset tuning: Push the button (1 — 6) for the station you
want. The button number (1 — 6) and station frequency
appear on the display.
Manual tuning: Turn the “TUNE” knob. The radio will step up
or down to another frequency.

AUDIO
291
To scan all the frequencies: Push the “SCAN” button briefly.
“SCAN” appears on the display. The radio will find the next
station up the band, stay there for a few seconds, and then
scan again. To select a station, push the “SCAN” button a
second time.
To scan the preset stations: Push the “SCAN” button until
you hear a beep. “SCAN” appears on the display. The radio
will tune in the next preset station up the band, stay there for
a few seconds, and then move to the next preset station. To
select a station, push the “SCAN” button a second time.(d) RDS (Radio Data System)
TYPE (Program type):
When you push the “TYPE” button, the current program type
receiving from RDS station appears on the display.
If the system receives no RDS stations, “NO PTY” appears on
the display.

AUDIO
302(g) Random playing
“RAND” button: There are 2 random features — you can
either
listen to the tracks on all the CDs in the player in random
order, or only listen to the tracks on a specific CD in random
order.
Random playing for the tracks on a CD: Push the “RAND”
button briefly. “
” will appear on the display and play
the CD you are listening to in random order. Random playing for all the tracks in the automatic
changer:
Push the “RAND” button and hold it until you hear a
beep. “
” will appear on the display and the player will
perform all the tracks on all the CDs in the changer in random
order. To turn off the random feature, push “RAND” a second
time.
When a track is skipped or the system is inoperative, push the
button to reset.

AUDIO
305
“
+” switches: Use these switches to adjust the volume.
To increase the volume, push the “+”. To decrease the volume,
push the “–”. The volume continues to increase or decrease
while the switch is being pressed.
(a) When the radio mode is selected
“
” or “” switch: Use these switches for seek tuning or to
select a preset station.
 To select a preset station, push this switch briefly. The
station you assigned to a switch on the audio system will be
selected.
 To seek a station, push and hold this switch until you hear
a beep. The radio will begin seeking up or down for a station,
and will stop on reception.
(b) When the “TAPE” mode is selected
“
” or “” switch: Use these switches to fast forward or
rewind the tape or for automatic program selection.
 To skip forward or reward for automatic program selection,
push this switch briefly. When automatically selecting a
program, you can skip up to 9 programs at a time. See page
276 or 296 for details.
 To fast forward or rewind the tape, push this switch until you
hear a beep. To stop fast forwarding or rewinding, push the
same side on the switch briefly. (c) When the “CD” mode is selected
“
” or “” switch: Use this switch to select a desired track.
Push this switch briefly, to select a desired track.
With a CD changer only —
“
” or “” switch: Use this switch to select a desired track
or CD.
 To select a desired track, push this switch briefly.
 To select a desired CD, push and hold this switch until the
desired number of the CD appears and you hear a beep.
Vehicles with rear seat entertainment system —
While the DVD player is in operation, the chapter or track can
be changed by pushing the “ ” or “” side of the switch.
CAUTION
Operate the switches with due care while you are
driving to avoid accidents.

AUDIO
314
1“DVD” button: Turn on the DVD mode.
2“SOURCE” button: Turn on the rear seat
entertainment system and selects the mode.
3“INFO” button: Indicate the “Information Menu”
screen. (See the separate “Navigation System
Owner’s Manual”.)
4“MENU” button: Indicate the “Menu” screen when the
navigation system is operated. (See the separate
“Navigation System Owner’s Manual”.)
5“OFF” button: Turn off the rear seat entertainment
system.
6Joy stick: Select a control switch, mode switch on the
screen or the menu for the disc.
7“ENT” button: Input the selected switch or the
selected menu for the disc.
8“DISC/CH/PROG” button: Skip directly to a desired
preset station, disc, track or chapter.
9“  ” button: Fast forwards a screen when the DVD
player is operated.
10“RETURN” button: Skip to the predetermined scene
for the disc.
11“MENU” button: Indicate the menu screen for DVD
video when the DVD player is operated.
12“AUDIO” button: Indicate the changing audio screen
when the DVD player is operated.
13“SUB TITLE” button: Indicate the changing subtitle
screen when the DVD player is operated.
14“DISPLAY” button: Adjust the color, tone, contrast
and brightness of the screen.
15“SET UP” button: Indicate the initial set up screen
when the DVD player is operated.
16“ANGLE” button: Select the angle of the screen when
the DVD player is operated.
17“SEARCH” button: Indicate the title search screen
when the DVD player is operated.
18“TOP MENU” button: Indicate the title selection
screen for DVD video when the DVD player is operated.
19“” button: Pause a screen when the DVD player is
operated.
20“  ” button: Reverse a screen when the DVD player
is operated.
21“  ” button: Play a screen when the DVD player is
operated.
22“TUNE/TRACK” button: Operate the front audio
system or select the track/chapter when the DVD
player is operated.
23“CURSOR” button: Indicates the control switches on
the screen when the DVD player is operated.
24“MAP” button: Indicate the map screen when the
navigation system is operated. (See the separate
“Navigation System Owner’s Manual”.)
25“DEST” button: Indicate the “Destination” screen
when the navigation system is operated. (See the
separate “Navigation System Owner’s Manual”.)
26“VIDEO” button: Turn on the video mode when your
personal audio device is connected.

AUDIO
316CD or DVD
mode: Use this switch to fast forward/rewind a disc
or select a desired track (“CD” mode)/chapter·track (“DVD\
”
mode).
 To select a desired track (“CD” mode) or chapter/track
(“DVD” mode), push this switch briefly.
 To fast forward or rewind a disc, push and hold this switch
until you hear a beep. To stop fast forwarding or rewinding,
push and hold the same side of the switch until you hear a
beep.
4“DISC/CH/PROG” switch: Use this switch to select a
preset station (radio mode), reverse side of a tape
(“TAPE” mode) or a desired CD (“CD” mode).
Radio mode: Push this switch to select a preset station. The
station you assigned to that particular switch on the audio
system will be selected.
“TAPE” mode: Push this switch to select the reverse side of
a cassette tape.
“CD” mode: Push this switch to select a desired CD (for a CD
changer only). Push until the desired CD number appears.
5“CURSOR (REMOTE)” switch: Use this switch to
display the DVD control switches or to locate the remote
control when you lose sight of the remote control.
6Joy stick and “ENT” switch: Use this joy stick to select
a control switch, mode switch on the screen or the menu
for a disc. Push the “ENT” switch to input the selected
switch or menu.
7“DISC” indicator light: This light indicates that the disc
is loaded.