2006 Lexus GS430 display

STARTING AND DRIVING
430GS430—The slip indicator light comes on when the engine
switch is selected in “IG−
ON” mode. The light goes off when
the engine is started.
GS300—The slip indicator light comes on for a few seconds
when the engine switch is selected in “IG −ON” mode.
If the indicator light does not come on when the engine switch
is selected in “IG −ON” mode, contact your Lexus dealer.
Keep the following in mind when driving:
 The hill −start assist control system operates for 5 seconds
maximally. If both the brake and accelerator pedals remain
undepressed for longer than 5 seconds, the system will
gradually stop operating.
 The hill− start assist control system is not designed for
stopping the vehicle on an uphill slope. When stopping the
vehicle, be sure to depress the brake pedal.
Hillstart assist control system failure
warning
G31039
 1 GS430 2GS300
If the hillstart assist control system malfunctions, the
slip indicator light (twowheel drive models only) and
brake system warning light (yellow) come on. At this time,
the above message appears. (GS430 only—In some
cases, the multiinformation display shows either
“CHECK VSC” or “CHECK ECB*” only.)
*: Electronically Controlled Brake System
If the message appears, the hill−start assist control system,
vehicle stability control system and traction control system do
not work. Although it is no problem to continue driving, have
your vehicle checked by your Lexus dealer as soon as
possible.

STARTING AND DRIVING
433
When the slip indicator light comes on, and the message
“CHECK ECB*” appears
on the multi−information display, the
vehicle dynamics integrated management does not operate.
Have your vehicle checked by your Lexus dealer as soon as
possible.
*: Electronically Controlled Brake System
In addition, when the master warning light comes on, and the
message “CHECK VGRS” or “CHECK P/S” appears on the
multi−information display, the system will not be temporarily
functioning. Although it is no problem in driving as usual, have
your vehicle checked by your Lexus dealer as soon as
possible.
CAUTION
Do not overestimate the vehicle dynamics integrated
management. Even when this management is
functional, there is a limit to vehicle stability, and
irresponsible driving may lead to an accident. When
driving, you should always pay attention to your speed
and keep a safe distance between your vehicle and the
vehicle in front.
BRAKE SYSTEM
GS430:
This brake system has 3 independent hydraulic circuits. If any
circuits should fail, the other will still work. However, the pedal
will be harder to press, and your stopping distance will
increase. Also, the brake system warning light (red) may come
on.
GS300:
The tandem master cylinder brake system is a hydraulic
system with two separate sub −systems. If either sub −system
should fail, the other will still work. However, the pedal will be
harder to press, and your stopping distance will increase. Also,
the brake system warning light (red) may come on.
CAUTION
Do not drive your vehicle with only a single brake
system. Have your brakes fixed immediately.
Brake actuator (GS430)
The brake actuator uses brake fluid pressurized by the pump
to power −assist the brakes. If the brake actuator fails during
driving, the brake system warning light (red) comes on and the
buzzer sounds continuously. In this case, the brakes may not
work properly. If the brake system warning light comes on,
immediately stop your vehicle and contact your Lexus dealer.

STARTING AND DRIVING
440
TIRE PRESSURE WARNINGSYSTEM
The tire pressure warning system warns you that the tire
inflation pressure is low.
The tire pressure warning syst em is not a substitute for
checking n ormal tire inflation pressure. Check the tire inflation
pressure with a tire pressure gauge regularly.
CAUTION
The warning system may not activate immediately if
bursts or sudden air leakage should occur.
G31003
 Tire pressure warning light
The tire pressure warning light comes on when the engine
switch “IG−ON” mode is selected, and goes off after a few
seconds. This means the tire pressure warning light is
operating properly. If the tire inflation pressure becomes low,
the light comes on again. At this time, the master warning light
comes on and the message “LOW TIRE” appears on the
multi−information display.
In this case, adjusting the tire inflation pressure will turn off the
light after a few minutes. If the light blinks, the tire pressure
warning system is not working properly. At this time, the
master warning light comes on and the message “CHECK
SYSTEM” appears on the multi −information display.

STARTING AND DRIVING
441
Display
Indicator
statusMeaningsDo this
Tire pressure
warning lightONTire inflation
pressure is
lowAdjust the tireinflation
pressure
Multi
information
displayLOW TIRE
(PRESSURE)
Tire pressure
warning lightBlinkingTire pressure
warning
system
malfunctionHave the
system
checked at
your Lexus
dealer
Multi
information
displayCHECK
(TIRE
PRES-
SURE)
SYSTEM
CAUTION
If the tire pressure warning light comes on, be sure to
observe the following precautions. Failure to do so
could cause loss of vehicle control and result in death
or serious injury.
Vehicles with runflat tires:
 Decelerate to the lowest appropriate speed as soon
as possible. Do not drive over 90 km/h (55 mph).
 Check and adjust the tire inflation pressure
immediately.
 If the tire pressure warning light comes on even after
tire inflation pressure adjustment, it is probable that
you have a flat tire. Have the tire replaced by the
nearest Lexus dealer.
 Avoid abrupt maneuvering and braking. If the vehicle
tires deteriorate, you could lose control of the
steering wheel or the brakes.
Vehicles with standard tires:
 Stop your vehicle in a safe place as soon as possible.
Adjust the tire inflation pressure immediately.
 If the tire pressure warning light comes on even after
tire inflation pressure adjustment, it is probable that
you have a flat tire. Check the tires. If the tire is flat,
change to the spare tire and have the flat tire repaired
by the nearest Lexus dealer.
 Avoid abrupt maneuvering and braking. If the vehicle
tires deteriorate, you could lose control of the
steering wheel or the brakes.

STARTING AND DRIVING
447
To initialize the system, perform the following:
1. Park
the vehicle in a safe place and select the engine switch
in “OFF” mode.
2. Adjust the pressure of all the installed tires to the specified
cold tire inflation pressure level. (See “Tire and wheels” on
pages 542 and 546.)
3. Select the engine switch in “IG −ON” mode.
4. Push and hold the tire pressure warning reset switch until
the tire pressure warning light blinks slowly three times and the
message “PRESSURE INITIAL” appears on the
multi−information display.
5. Wait for a few minutes with the engine switch in “IG −ON”
mode, and then select the engine switch in “OFF” position.
If you push the tire pressure reset switch while the vehicle is
moving, initialization is not performed.
If you push the tire pressure reset switch accidentally and
initialization is performed, adjust the tire inflation pressure to
the specified level and initialize the system again.
G31007
If the tire pressure warning light does not blink slowly three
times and the message “PRESSURE INITIAL” does not
appear on the multi −information display when you push and
hold the reset switch, initialization has failed and the tire
pressure warning system may not work properly. In this case,
initialize the system again. If initialization cannot be
performed, have the system checked at your Lexus dealer.

STARTING AND DRIVING
452
Adaptive variable suspension control (GS430
only)
When the precollision sensor detects an object or
vehicle with which your vehicle may collide, and
determines that a collision may be unavoidable, the
adaptive variable suspension adjusts the damping effect
on the shock absorbers and regulates the vehicle not to
pitch forward so much.
The adaptive variable suspension will operate when the
following all conditions are met.
When the vehicle speed is about 5 km/h (3 mph) or over.
 When the approaching speed in regard to the object or the
vehicle exceeds about 30 km/h (18 mph).
Precollision system failure warning
G31079
Precollision system warning light
The light warns that there is a problem somewhere in the
precollision system.
The light comes on when the engine switch is selected in
“IG−ON” mode. If the system works properly, the light goes off
after a few seconds.
If the light does not come on when the engine switch is selected
in “IG−ON” mode, have your vehicle checked by your Lexus
dealer.
If the system has a problem, the pre− collision system warning
light comes on or blinks. At this time, the master warning light
comes on, a warning tone sounds, and either of the following
messages appears on the multi−information display.
 PCS DISABLED NOW
 CHECK PCS