2006 Lexus GS430 key

STEERING WHEEL AND MIRRORS
209
The outer foot lights go off 15 seconds after the lights come on
or when:

Pushing the lock switch on the outside door handle with an
electronic key in possession,
 the doors are locked with th e wireless remote control
function,
 the doors are locked by inserting a mechanical key into the
door keyhole,
 the doors are locked with the power door lock switch on the
driver’s side, or
 the selector lever is moved out of “P” position when the
engine switch is on.
NOTE:
* The outer foot lights illuminating time can be changed.
Ask your Lexus dealer for details.
INSIDE REAR VIEW MIRROR
G17007
Adjust the mirror so that you can just see the rear of your
vehicle in the mirror.
Pushing the “AUTO” button changes the mode between
”AUTO” and ”DAY”.
The indicator comes on when the ”AUTO” mode is selected.
”DAY” mode: The mirror surface is normal.
”AUTO” mode: If the mirror detects light from the
headlights of the vehicle behind you, the mirror surface
darkens slightly to reduce the reflected light.
When the inside rear view mirror surface changes, the outside
rear view mirror surfaces will also become darker.
When the engine switch is selected in “IG −ON” mode, the
inside rear view mirror always turns on in the ”AUTO” mode.

TOUCH SCREEN
226
G18010
5. When this screen is displayed, input the Passkey
displayed on the screen into the phone.
For the operation of the phone, see the manual that comes with
your cellular phone.
If you want to cancel it, touch “Cancel”.
G18011
6. When the connection is completed, device name and
Bluetooth Device Address is displayed.
You do not need to enter it in case of using the same phone.

TOUCH SCREEN
230
G18014
You can change the Device Name and Passkey.
BD_ADDR is Bluetooth device address. Do not change the
Device Name to the same name as the one of the other
Bluetooth phones. They cannot be identified.
BD_ADDR is different depending on the system. You can
confirm the address when it cannot be identified.To change the Device Name—
You can change the Device Name to the desired one from
the name already registered in the system.
G18014
Touch
the “Change” switch of Device Name to display the
“Device Name List” screen.
G18015
Select the desired name and touch “OK”.

TOUCH SCREEN
231
To change the Passkey—
The Passkey in the system is initially fixed. You can
change the Passkey within 48 figures.
G18014
Touch the “Change” switch of Passkey to display “Enter
Bluetooth Passkey” screen.
G18016
Touch the desired key to input the Passkey.
Each time you touch “
”, an inputted number is deleted.
Touch “Enter”.

TOUCH SCREEN
233
(d) Calling on the Bluetooth phone
After
you enter the Bluetooth phone, you can call by using
handsfree system. This system has 6 methods below by
which you call.
By dial—
You can call by inputting the telephone number.
This cannot be operated while you are driving.
G18008
Touch the desired key to input the telephone number.
Each time you touch “ ”, an inputted number is deleted.
Touch “
” or push of the telephone button. By phone book—
You can call by phone book data which is transferred from
your cellular phone.
The system has two phone books. You can register up to
500 numbers in each book.
This cannot be operated while you are driving.
G18008
Touch the desired key to input the telephone number.
1. Touch the “Phone Book” switch to display “Phone
Book” screen.

TOUCH SCREEN
239
(e) Receiving on the Bluetooth phone
G18023
When a call is received, this screen is displayed with a
sound. Touch “
” or push of the telephone button
to talk on the phone.
To hang up the phone:
Touch “
” or push of the telephone button again.
To refuse to receive the call: Touch “
” and hold it.
To adjust the volume of received call: Touch “–” or “+”.
On the international phone call, the party’s name may not be
displayed correctly depending on the cellular phone which you
have. (f) Talking on the Bluetooth phone
G18024
While you are talking on the phone, this screen is
displayed. You
can do the operation below on the screen.
To adjust the volume of the party’s voice: Touch “–” or “+” switch.
To hang up the phone: Touch the “
” switch or push of the telephone
button.
To mute your voice: Touch the “Mute ON” switch.
To input the Key: Touch the “0 −9” switch.

TOUCH SCREEN
240
G18025
Touch the desired number to input the key.
To hang up the phone:Touch “
” or push of the telephone button.
This cannot be operated while you are driving.
G18026
If the continuous tone signal is registered in a phone
book, this screen appears. (If not registered, “Send” and
“Exit” is not displayed.)
Confirm the number displayed on the screen and touch
“Send” switch. The number to the marked sign will be
sent.
When you touch “Exit”, this function will be finished and normal
tone screen appears.
To hang up the phone:
Touch “
” or push of the telephone button.
The continuous tone signal is the marked sign (p or w) and the
number following tel ephone number. (ex. 056133p0123w#1

)
When you call the number registered in phone book and input
a code number and the like to operate an answering machine
or use a telephone service in bank, you can do this operation.

AUDIO
317
Description of each switch—
Switches on top page
“Menu” and “Top Menu” switches: If you touch any of the
above switches, the menu screen for DVD video appears. (For
the operation, see the manual that come with the DVD video
disc provided separately.)
“
” switch: The menu control key appears on the screen.
(See page 318.)
“
” switch: Use this switch to pause the video screen.
When you touch this switch again, the video screen advances
frame by frame.
“ ” switch: Touch this switch to fast reverse during
playback and reverse slowly during pause.
“  ” switch: Use this switch to resume normal play after stop
or pause.
“  ” switch: Touch this switch to fast forward during
playback and forward slowly during pause.
Switches on second page
“Set Up” switch: The initial setup screen appears. (See page
320.)
“Search” switch: The title search screen appears. (See
page 318.)
“Return” switch: Use this switch to display the
predetermined scene and start playing from there.
“Audio” switch: The audio changing screen appears. (See
page 319.)
“Sub Title” switch: The subtitle changing screen appears.
(See page 319.)
“Angle” switch: The angle selection screen appears. (See
page 320.)