2006 Lexus GS300 Switches

SWITCHES
59 This function will work even with the window lock switch
pressed in.
The windows also can be opened using the wireless remote
control. For details, see page 28.
Jam protection function
During automatic raising operation, retained accessory power
raising operation or raising operation using the mechanical key
from the outside, the window stops and is lowered if something
gets caught between the window and window frame.
If the window receives a strong impact, this function may work
even if nothing is caught.
If the battery is disconnected or run down
The power window may not operate automatically and the jam
protection function will not function correctly after you
reconnect, replace or recharge the battery. At this time, the
indicator lights of the switches will flash. In any of these cases,
you should normalize the power window on each door.
To normalize the power windows:
1. Push down the power window switch of each door and lower
the windows halfway.
2. Pull up the switch until the windows close and hold the
switch for one second.
Make sure the windows open and close automatically. If the
power windows cannot be operated properly, have them
checked by your Lexus dealer.
CAUTION
To avoid serious personal injury, you must do the
following.
Before you close the power windows, always make
sure there is nobody around the power windows. You
must also make sure the heads, hands and other
parts of the bodies of all occupants are kept
completely inside the vehicle. If someone’s neck,
head or hands get caught in a closing window, it
could result in death or serious injury. When anyone
closes the power windows, make sure he or she
operates the windows safely.
When small children are in the vehicle, never let them
use the power window switches without supervision.
Use the window lock switch to prevent them from
making unexpected use of the switches.

SWITCHES
60
Be sure to turn the engine switch to “OFF” mode
when you leave your vehicle.
Never leave anyone (particularly a small child) alone
in your vehicle, especially when the engine switch is
on. Otherwise, he/she could use the power window
switches and get trapped in a window. Unattended
persons (particularly a small child) can be involved in
a serious accident.
Never try jamming any part of your body to activate
the jam protection function intentionally.
The jam protection function may not work if
something gets caught just before the window fully
closed.EMERGENCY FLASHER SWITCH
G12015
To turn on the emergency flashers, push the switch. To
turn them off, push the switch again.
All the turn signal lights will flash. The emergency flashers will
work with the engine running or off and with or without the
electronic key.
Turn on the emergency flashers to warn other drivers if you
must stop your vehicle where it might be a traffic hazard.
Always pull your vehicle as far off the road as possible.
The turn signal light switch will not work when the emergency
flashers are in operation.
NOTICE
To prevent the battery from being discharged, do not
leave the switch on longer than necessary when the
engine is not running.

SWITCHES
61
SEAT HEATER SWITCHES
G12024
To use the seat heater switches, pull the lever to slide the
rear console box cover backward.
G12025

1
For driver’s seat 2
For front passenger’s seat
G12026
To turn on the heater, turn the dial as shown. The indicator
light (yellow) comes on.
The engine switch must be selected in “IG−ON” mode.
The heating level will be increased as you turn the dial to the
higher number.
To disable this function, turn the dial to the “0” position. The
indicator light goes off. Keep the dial in this position when not
in use.

SWITCHES
62
CAUTION
Occupants must use caution when operating the seat
heater because they may experience minor burns even
at low temperatures. Use extra caution for;
Babies, small children, elderly persons, sick persons
or persons with physical disabilities
Persons who have sensitive skin
Persons who are exhausted
Persons who have taken alcohol or drugs which
induce sleep (sleeping drug, cold remedy, etc.).
To prevent the seat from overheating, do not use the
seat heater with a blanket, cushion, or other insulating
objects which cover the seat.
NOTICE
Do not put unevenly weighted objects on the seat and
do not stick sharp objects (needles, nails, etc.) into
the seat.
When cleaning the seats, do not use organic
substances (paint thinner, benzine, alcohol,
gasoline, etc.). They may damage the heater and seat
surface.
To prevent the battery from being discharged, turn
the switches off when the engine is not running.

SWITCHES
63
SEAT VENTILATOR/HEATER
SWITCHES
The seats can be warmed and deliver airflow from the seat
surface using seat ventilator/heater switches.
G12027
To use the seat heater/ventilator switches, pull the lever to
slide the rear console box cover backward.
G12028

1
For driver’s seat 2
For front passenger’s seat

SWITCHES
64
Seat ventilator
G12029
To turn on the seat ventilator, turn the dial as shown. The
indicator light (green) comes on.
The engine switch must be selected in “IG−ON” mode.
More air will be delivered as you turn the dial to the higher
number.
After the switch is turned on, it takes several minutes until you
feel cool.
To disable this function, turn the dial to the “0” position. The
indicator light goes off. To disable this function, turn the dial to
the “0” position. The indicator light goes off. Keep the dial in
this position when not in use.
NOTICE
Do not put unevenly weighted objects on the seat and
do not stick sharp objects (needles, nails, etc.) into
the seat.
When cleaning the seats, do not use organic
substances (paint thinner, benzine, alcohol,
gasoline, etc.). They may damage the seat ventilation
/ heating system and seat surface.
When cleaning the seats, fully wring out a towel to be
used. The wet seats may cause the seat
ventilation/heating system to malfunction.
To prevent the battery from being discharged, turn
the switches off when the engine is not running.

SWITCHES
65
Seat heater
G12030
To turn on the seat heater, turn the dial as shown. The
indicator light (yellow) comes on.
The engine switch must be selected in “IG−ON” mode.
The heating level will be increased as you turn the dial to the
higher number.
To disable this function, turn the dial to the “0” position. The
indicator light goes off. Keep the dial in this position when not
in use.
CAUTION
Occupants must use caution when operating the seat
heater because they may experience minor burns even
at low temperatures. Use extra caution for;
Babies, small children, elderly persons, sick persons
or persons with physical disabilities
Persons who have sensitive skin
Persons who are exhausted
Persons who have taken alcohol or drugs which
induce sleep (sleeping drug, cold remedy, etc.).
To prevent the seat from overheating, do not use the
seat heater with a blanket, cushion, or other insulating
objects which cover the seat.

SWITCHES
66
NOTICE
Do not put unevenly weighted objects on the seat and
do not stick sharp objects (needles, nails, etc.) into
the seat.
When cleaning the seats, do not use organic
substances (paint thinner, benzine, alcohol,
gasoline, etc.). They may damage the seat
ventilation/heating system and seat surface.
When cleaning the seats, fully wring out a towel to be
used. The wet seats may cause the seat
ventilation/heating system to malfunction.
To prevent the battery from being discharged, turn
the switches off when the engine is not running.