2006 Lexus GS300 door lock

SECTION 1 – 4
97
INSTRUMENTS AND CONTROLS
Interior equipment
Sun visors98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior lights98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Personal lights99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Illuminated entry system100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Luggage compartment lights103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outside temperature display106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cigarette lighter and ashtray107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power outlet108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear console box109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glove box11 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Garage door opener111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cupholders11 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coin boxes11 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overhead console box11 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Door pockets11 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trunk storage extension11 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor mat11 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear electric sunshade120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tie−down hooks122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First−aid kit holder122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INTERIOR EQUIPMENT
100
ILLUMINATED ENTRY SYSTEM
G14029

1
Outer foot lights
2
Steering spot light
3
Seat spot lights
(with the interior light in “DOOR” position)
4
Selector lever spot light
5
Inside door handle lights
6
Door courtesy lights
7
Foot lights
8
Outer scuff lights
The outer foot lights, steering spot light and seat spot
lights will come on when you get close to the vehicle
(about 1 m (3 ft.) from the outside door handle), carrying
an electronic key, or open the door.* After all the doors are
closed, the lights remain on for about 15 seconds and then
fade out.** (For details, see “Outer foot lights” on page
208.)
NOTE:
*When you open a door other than the driver’s door, the seat
spot light near the door you opened comes on.
**The duration of lighting can be changed.
Ask your Lexus dealer for details.
However, in the following cases, the lights go out immediately:
All the doors are closed and the engine switch is selected
in “ACC” or “IG−ON” mode.
All the doors are locked.

INTERIOR EQUIPMENT
101 The foot lights and inside door handle lights will comes on
when any of the doors is/are opened or the engine switch
is in “IG−ON” mode. After all the doors are closed and the
engine switch is turned off, the lights remain on for about
15 seconds and then fade out.*
NOTE:
*The duration of lighting can be changed.
Ask your Lexus dealer for details.
However, the lights go out immediately when all the doors are
locked and the engine switch is turned off.
The intensity of the foot lights and inside door handle lights can
be changed with the instrument panel light control switch. The
lights will be turned off when the light control switch is turned
to minimum. (For details, see “Instrument panel light control”
on page 96.)
Outer scuff lights and courtesy lights
Outer scuff lights and courtesy lights will come on when any of
the doors is/are opened. After all the doors are closed, the
lights will turn off.Selector lever spot light
The selector lever spot light will come on when the engine
switch is selected in “ACC” or “IG−ON” mode. When the
selector lever is moved out of “P” position, the intensity of the
light will be reduced.
The intensity of the selector lever spot light can be changed
with the instrument panel light control switch. This light will be
turned off when the light control switch is turned to minimum.

INTERIOR EQUIPMENT
102
Lighting table
The lighting conditions are as follows: If several conditions concur, the lights may not operate as shown.
Lighting conditionSteering spot light &
seat spot lightInside door handle lights
& foot lights*Outer scuff lights & door
courtesy lightsSelector lever spot light*
Getting close to the vehicle
with the electronic key in pos-
session or unlocking any
doorsON**
→Fade out about 15
seconds later———
Locking all the doorsOFFOFF——
Opening the door(s)ONONON*—
Closing all the doorsOFF
(ON for about 15 sec-
onds before turned off)OFF
(ON for about 15 sec-
onds before turned off)OFF—
Turning the engine switch from
“OFF” to “ACC” or “IG−ON”OFFON
(IG−ON only)—ON
Turning off the engine switchON**
→Fade out about 15
seconds laterOFF
(ON for about 15 sec-
onds before turned off)—OFF
NOTE:
*The lights can be set to dim when the selector lever is moved out of “P”.
**The seat spot light can be set not to be turned on.
Ask your Lexus dealer for details.

INTERIOR EQUIPMENT
11 0
CAUTION
To reduce the chance of injury in case of an accident
or a sudden stop, always keep the rear console box
closed while driving.
Do not apply excessive load over the tray with your
hand, or closing the console box lid may injure your
fingers.
Do not open the rear console box while operating the
rear vents, or closing the console box lid may injure
your fingers.
GLOVE BOX
G14012

1
Unlock 2
Open 3
Lock
To open the glove box door, push the button. To lock the
glove box door, insert the mechanical key and turn it
clockwise.
With the tail lights on, the glove box light will come on.
CAUTION
To reduce the chance of injury in case of an accident or
a sudden stop, always keep the glove box door closed
while driving.

INTERIOR EQUIPMENT
111
GARAGE DOOR OPENER
The garage door opener (
Universal
Transceiver) is manufactured under license from
HomeLink
 and can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting
systems, and security systems, etc.
(a) Programming the HomeLink
G14013

1
Indicator light 2
Buttons
The HomeLink
 in your vehicle has 3 buttons and you can
store one program for each button.
To ensure correct programming into the HomeLink
, install a
new battery in the hand−held transmitter prior to programming.
The battery side of the hand−held transmitter must be pointed
away from the HomeLink
 during the programming process.For Canadian users, follow the procedure in “Programming an
entrance gate/Programming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink
 buttons you want to program.
2. Place your hand−held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink
.
G14058
Keep the indicator light on the HomeLink in view while
programming.

INTERIOR EQUIPMENT
11 3
Programming a rolling code system
If your device is “Rolling Code” equipped, it is necessary
to follow steps 1 through 4 under the heading
“Programming the HomeLink
” before proceeding with
the steps listed below.
1. Locate the “training” button on the ceiling mounted garage
door opener motor. The exact location and color of the button
may vary by brand of garage door opener. Refer to the owner’s
guide supplied by the garage door opener manufacturer for the
location of this “training” button.
2. Press the “training” button on the ceiling mounted garage
door opener motor.
Following this step, you have 30 seconds in which to initiate
step 3 below.
3. Press and release the vehicle’s programmed HomeLink

button twice. The garage door may open. If the door does
open, the programming process is complete. If the door does
not open, press and release the button a third time. This third
press and release will complete the programming process by
opening the garage door.
The ceiling mounted garage door opener motor should now
recognize the HomeLink
 unit and be able to activate the
garage door up/down.
4. Repeat steps 1 through 3 for each remaining HomeLink

button to program another rolling code system.
Programming an entrance gate /
Programming all devices in the Canadian
market
1. Decide which of the 3 HomeLink buttons you want to
program.
2. Place your hand−held gate/device transmitter 25 to 75 mm
(1 to 3 in.) away from the surface of the HomeLink
.
Keep the indicator light on the HomeLink
 in view while
programming.
3. Press and hold the selected HomeLink
 button.
4. Continuously press and release (cycle) the hand−held
gate/device transmitter button every two seconds until step 5
is complete.
5. When the indicator light on the HomeLink
 changes from a
slow to a rapid flash after 20 seconds, you can release both
buttons.
6. Test the operation of the HomeLink
 by pressing the newly
programmed button. Check to see if the gate/device operates
correctly.
7. Repeat steps 1 through 6 for each remaining HomeLink

button to program another device.
Programming other devices
To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.

INTERIOR EQUIPMENT
11 9
TRUNK STORAGE EXTENSION
G14021

1
Lock 2
Unlock 3
Open
Pull down the center armrest in the rear seat. Push down
the handle and open the armrest door.
Access to the trunk can be prevented by locking the armrest
door with the mechanical key.
See “Stowage precautions” on page 457 for precautions when
loading luggage.
CAUTION
Be sure to close the door when the trunk storage
extension is not in use. Luggage or cargo in the trunk
may be thrown into the passenger compartment in a
sudden stop or crash resulting in injury.
FLOOR MAT
G14025
Use a floor mat of the correct size.
If the floor carpet and floor mat have 2 holes, then they are
designed for use with locking clips. Fix the floor mat with
locking clips into the holes in the floor carpet.