Lumbar support (Driver's seat) The lumbar support feature provides
lower back support to the driver. Move
the lever up or down to adjust the seat
lumbar area.
Walk-in mechanism (Coupe) This feature makes it easier to get in and
out of the rear seat.
Use the following procedure when getting
in and out of the rear seat.
1. Pull the seatback lever upward
q 1
or
pull the walk-in lever
q 2
on the side of
the front seat upward to fold the front
seatback down.
2. To slide the front seat forward, push
the seatback switch
q 3
below the
seatback lever. The front seat will
move forward. 3. Get in or out of the vehicle.
4. Push the seatback switch
q 3
again to
return the front seat to its original po-
sition and raise the seatback.
O The front passenger seat will stop at 7
in (175 mm) from its front most posi-
tion to retain space for the rear pas-
senger.
CAUTION O Do not raise the seatback before re-SSS0184 SSS0577
1-4 Safety Ð Seats, seat belts and supplemental restraint system
w 06.1.4/V35-D/V5.0
X
