2006 Hyundai H-1 (Grand Starex) length

1
BEFORE DRIVING YOUR VEHICLE
43
B170A04A-AAT HEIGHT ADJUSTABLE FRONT SEAT SHOULDER BELT(If installed) You can adjust the height of the front shoulder belt anchor to one of the 4positions. If the height of the adjusting seat belt is too near your neck, you will not begetting the most effective protection. The shoulder portion should be ad- justed so that it lies across your chestand midway over your shoulder near- est the door and not your neck. B170A01A
!
To adjust the height of seat belt anchor, lower or raise the height adjuster into anappropriate position. To raise the height adjuster, pull it up. To lower it, push it down while pressing the height adjusterbutton. Release the button to lock the anchor into position. Try sliding the releasebutton to make sure that it has locked into the position.
B180A02A-GAT Driver's and Passenger's 3-Point System with Webbing ClampLocking Retractor (If installed) To Fasten Your Belt To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible"click" when the tab locks into the buckle. The seat belt automatically adjusts tothe proper length only after the lap belt is adjusted manually so that it fits snugly around your hips. If you leanforward in a slow, easy motion, the belt will extend and let you move around.B180A01L
WARNING:
o The height adjuster must be in the locked position whenever the vehicle is moving.
o The misadjustment of height of the shoulder belt could reducethe effectiveness of the seat beltin a crash.

1BEFORE DRIVING YOUR VEHICLE
44
B200A01S-GAT Adjusting Your Seat Belt
B200A01L
You should place the belt as low as possible on your hips, not on yourwaist. If the belt is located too high on your body, you could slide under it in case of accident or a sudden stop.This could result of death, serious in- jury or property damage. Both arms should not be under or over the belt.Rather, one should be over and the other under, as shown in the illustra- tion.Never wear the seat belt under the arm nearest to the door.
The seat belt automatically adjusts to the proper length only after the lap beltis adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the beltwill extend and let you move around. If there is a sudden stop or impact, how- ever, the belt will lock into position. Itwill also lock if you try to lean forward too quickly. Check to make sure that the belt is properly locked and that thebelt is not twisted.
B180A01A-GAT Driver's and Passenger's 3-Point System with EmergencyLocking Retractor (If installed) To Fasten Your Belt To fasten your seat belt, pull it out of the retractor and insert the metal tabinto the buckle. There will be an au- dible "click" when the tab locks into the buckle.
If there is a sudden stop or impact,however, the belt will lock into position.It will also lock if you try to lean forward too quickly.
B180A01L

9 VEHICLE SPECIFICATIONS
2
2WD
1,885(74)
SHORT
3
VAN
4,695(184)
1,820(71)1,900(74)
2,810(110)
1,570(61)1,545(60)
Front Rear
J010A03P-GAT MEASUREMENT J010A02P-GAT MEASUREMENT
J020A02P-GATFUEL TANK SYSTEMmm (in.)
MINIBUS, VAN
Overall length Overall widthOverall height Wheel base Wheel tread
ITEMS FUEL TANK CAPACITYMINIBUS, VAN 65L TRUCK
70LLONG(1ton)
STANDARD
5085 (200)1820 (71)
3080 (121)
1570 (62) 1408 (55) EXTRA LONG (1.25 ton)
STANDARD
5415 (213)1820 (71)
3280 (129)
1570 (62)1408 (55)TRUCK
Overall length Overall width Wheel base Wheel tread
Front Rear
SUPER
mm(in.)
12

9

1,970(77)
6
VAN
3
VAN
5,035(198)

1,980(77)
3,080(121)

9
4,695(184)
1,885(74)
1,570(61)1,545(60)
4WD
4,825(189)

1,995(78)
1,565(61)1,560(61)
6
VAN
LONG
7