2006 HONDA S2000 service interval

If you have the required service
done but do not reset the display, or
reset the display without doing the
service, the system will not show the
proper maintenance intervals. This
canleadtoseriousmechanical
problems because you will no longer
have an accurate record of when
maintenance is needed.
Your authorized Honda dealer
knows your vehicle best and can
provide competent, ef f icient service.However, service at a dealer is not
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualif ied service f acility or
person who is skilled in this type of
automotive service. Make sure to
have the service f acility or person
reset the display as previously
described. Keep all receipts as proof
of completion, and have the person
who does the work fill out the
maintenance record. Check your
warranty booklet f or more
inf ormation.
Press the TRIP button for more
than 5 seconds. The maintenance
items code(s) will disappear, and
the engine oil lif e will reset to ‘‘100.’’ We recommend using Honda parts
and fluids whenever you have
maintenance done. These are
manuf actured to the same high-
quality standards as the original
components, so you can be conf ident
of their performance and durability.
4.
CONT INUED
Important Maintenance
Precautions
Maintenance Minder
Maint enance
137
——y
y
(y
y

µµ
µ
µ µ
Ì
U.S. Vehicles:
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are unsure of how to perf orm
any check, turn to the appropriate
page listed.Engine oil level Check every
time you fill the fuel tank. See
page .
Engine coolant level Check the
radiator reserve tank every time
you f ill the f uel tank. See page .
Brakes and clutch Check the
f luid level monthly. See page .
Tires Check the tire pressure
monthly. Examine the tread f or
wear and foreign objects. See page . Lights Check the operation of
the headlights, parking lights,
taillights, high-mount brake light,
and license plate lights monthly.
See page .
According to state and federal
regulations, f ailure to perf orm
maintenance on the items marked
with will not void your emissions
warranties. However, all
maintenance services should be
perf ormed in accordance with the
intervals indicated by the
inf ormation display. 111
112
151
161 152
Maintenance Minder
Maintenance, replacement, or
repair of emissions control
devices and systems may be done
by any automotive repair
establishment or individual using
parts that are ‘‘certif ied’’ to EPA
standards.
Owner’s Maintenance Checks
138
——y


y
(y

y

µ
The oil’s viscosity or weight is
provided on the container’s label.
Select the oil f or your vehicle
according to this chart.
An oil with a viscosity of 10W-30 is
pref erred f or optimum f uel economy
and year-round protection in your
vehicle. You may use 5W-40 oil if the
temperature in your area goes below
0°F ( 20°C).
Your vehicle does not require any oil
additives. Additives may adversely
af f ect the engine or transmission
perf ormance and durability.Always change the oil and f ilter
according to the recommendations in
the maintenance schedule. The oil
and f ilter collect contaminants that
can damage your engine if they are
not removed regularly.
Changing the oil and f ilter requires
special tools and access f rom
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lif t f or this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.
Run the engine until it reaches
normal operating temperature,
then shut it off.
You may use a synthetic motor oil if
it meets the same requirements
given f or a conventional motor oil: it
displays the API Certif ication Seal,
and it is the proper weight. You must
f ollow the oil and f ilter change
intervals shown on the information
display.
1.
A dding Engine Oil, Changing the Oil and Filter
Synthetic Oil
Engine Oil A dditivesChanging the Oil and Filter
144
Ambient Temperature
——y
y
(y
y

Use an SAE 90 viscosity hypoid gear
oil, API service classif ied GL5 or
GL6 only.
Put a new washer on the f iller bolt,
then reinstall the f iller bolt. Tighten
it securely. Tightening torque:
If you are not sure how to check and
add f luid, contact your dealer.
Check the f luid level with the
dif f erential at normal operating
temperature and the vehicle sitting
on level ground. Remove the
dif f erential f luid f iller bolt and
washer, and caref ully f eel inside the
bolt hole with your f inger. The f luid
level should be up to the edge of the
bolt hole. If it is not, slowly add f luid
until it starts to run out of the hole. The dif f erential should be drained
and ref illed with new f luid according
to the intervals shown on the
inf ormation display.
Dif f erential Fluid
150
CORRECT LEVEL
FILLER BOLT
33 lbf·ft (45 N·m , 4.6 kgf·m)
——y

y
(y
y

ÎÎ
Î
Î
.................................
Parking Lights .57
.............................
PGM-FI System .202
...................................
Pollen Filter .158
..........................
Power Door Locks .63
..................
Power Socket Location .77
..............................
Power Windows .68
.........
Pregnancy, Using Seat Belts .14
........................
Preparing to Drive .121
.........
Protecting Adults and Teens .10
...
Additional Safety Precautions .15
.....
Advice f or Pregnant Women .14
........................
Protecting Children .28
.....................
General Guidelines .28
.......
Protecting Larger Children . 36
.........
Protecting Small Children . 32
...................
Radiator Overheating . 179
...............
Radio/CD Sound System . 86
.................
Radio Thef t Protection . 102
...................
Readiness Codes . 183,204
..
Rear Lights, Bulb Replacement . 156
............................
Rear View Mirror .75
.................
Rear Window Def ogger . 59
................
Reclining the Seat-backs . 67.......
Recommended Shif t Speeds . 124
Recovery Vehicle, Emergency .......................................
Towing .191
........................................
Ref ueling .109
.......................
Reminder Indicators .45
.......................
Remote Transmitter .65
Replacement Inf ormation ..............
Dust and Pollen Filter . 158
................
Engine Oil and Filter . 144
..........................................
Fuses .186
................................
Light Bulbs .152
....................................
Schedule .133
...........................................
Tires .164
.............................
Wiper Blades .159
Replacing Seat Belts Af ter a ............................................
Crash .18
..........
Reporting Saf ety Def ects . 208
Reserve Tank, Engine ...............................
Coolant .112, 146
...............................
Restraint, Child .28
...........................
Reverse Lockout .124
................................
Rotation, Tire .163
..................................
Saf ety Belts .8, 16 .........
Safety Defects, Reporting . 208
.................................
Saf ety Features .7
...........................................
Airbags .9
.......................................
Seat Belts .8
.............
Saf ety Labels, Location of . 41
...............................
Saf ety Messages .ii
................................
Satellite Radio .91
.....................................
Seat Belts .8, 16
...............
Additional Information . 16
.....
Advice f or Pregnant Women . 14
Automatic Seat Belt ...............................
Tensioners .18
.....................................
Cleaning .157
......................
Lap/Shoulder Belt .17
................................
Maintenance .18
Reminder Indicator and ................................
Beeper .16, 46
...................
System Components . 16
...............
Use During Pregnancy . 14
........................
Seats, Adjusting the .67
...............................
Serial Number .194
...........................
Service Intervals .139
...........................
Service Manual .209
.........
Service Station Procedures . 109
............................
Setting the Clock .54
Index
S
R
VI
——y

y
(y
y