2006 GREAT WALL SAFE plug

B0-49Vehicle Body
Tailgate
Dismantle of Tailgate
1. Tear down the trim panel at tailgate;
Tear down the ten plastic clipes and take down the trim panel
at tailgate.
2. Tear down the tailgate lock barrel and lock from tailgate:
(a) Screw off the nuts of lock barrel from the inside of
tailgate cavity and take down the lock barrel from the
outside.
(b) Tear down the three screws to take down the tailgate lock.
3. Tear down the tailgate lock clip
Take down the tailgate lock clip from the lower beam flange
after tearing down the two screws.
Dismantle of Tailgate
1. Tear down the pneumatic ejector rod;
Tear down the screws and take down the two pneumatic ejector
rod from the tailgate and the body.
2. Tear down the tailgate hinge and the tailgate;
(a) Tear down the eight bolts to take down the right and left
tailgate hinge from the tailgate and the body;
(b) Pull out the plugging element of wire harness to tear
down the tailgate from the body.
3. Tear down the position limit
After tearing down the two bolts, take down the left and right
side upper/lower position limits and the upper/lower position
limit from the tailgate and the body.
Tear down the position limit
Mount of tailgate lock and the tailgate
Mount the tailgate lock and the tailgate in the reverse
order

B0-53Vehicle Body
Instrument Panel
Dismantle of instrument panel
(Dr SF)
1. Disconnect the cable of accumulator from the negative
polar;
2. Tear down the steering wheel;
3. Tear down the combined switch shell cluster;
4. Tear down the bonnet lock switch;
Tear down the two screws and the sliding fastener of bonnet
lock.
5. Tear down the central bottom-wall (Dr)
Tear down the decorative cover of gearbox (SF)
6. Tear down the instrument cover (SF).
Tear down the two screws and the cover.
7. Tear down the lower instrument cover;
(a) Tear down the ignition lock;
(b) Tear down the five screws and the cover;
Tear down the four screws and the cover;
(c) Disconnect the plugging elements.
8. Tear down the air-conditioner controlling panel;
(a) Pull out the air-conditioner controlling button;
(b) Prize out the A/C switch;
(c) Prize out the air-conditioner panel as shown in the
drawing with screwdriver and take it down.
Notice: the screwdriver should be wrapped with adhesive
strap at its head before using.
(d) Disconnect the plugging elements.
9. Tear down the decorative cover of instrument (Dr)
(a) Tear down the two screws to pull out the decorative cover
of instrument;
(b) Disconnect the plugging elements.E
F

B0-54Vehicle Body
Instrument Panel
10. Tear down the combination instrument;
(a) Tear down the four screws;
Tear down the two screws;
(b) Disconnect the plugging elements;
(c) Tear down the combination instrument.
11. Tear down the ashtray cluster;
12. Tear down the central cover;
(a) Tear down the decorative frame;
(b) Tear down the three screws to pull out the central cover;
(c) Disconnect the plugging elements.
13. Tear down the central panel;
(a) Prize out the central panel as shown in the drawing with
screwdriver to take it down.
Notice: the screwdriver must be wrapped with adhesive strap
at its head before using.
(b) Disconnect the plugging elements.
14. Tear down the air-conditioning controlling mechanism
assembly;
Tear down the two screws, which will let the air-conditioning
controlling mechanism in suspension.
15. Tear down the air-controlling panel;
(a) Tear down the four screws to pull out the air-condition-
ing panel;
(b) Disconnect the plugging element;
16. Tear down the CD device or the combined acoustic
device;
(a) Tear down the four screws.
(b) Disconnect the aerial cable and the plugging elements.
(c) Tear down the CD device or the combined acoustic device.
17. Tear down the glove box;
Tear down the two screws and the glove box.
SF
Seize the flanges at two ends of glove box into the sliding
channel of the glove box.
18. Tear down the central air tunnel;
Tear down the four screws and the central air tunnel.

B0-55Vehicle Body
Instrument Panel
19. Tear down the instrument panel body;
(a) Tear down the three screws and the instrument panel.
(b) Disconnect the plugging elements.
SF:
(a) Tear down the fixing bolts at the ends of instrument panel
body to pull out the fixed clipes at the front end.
(b) Disconnect the plugging elements.
SL SK SJ SY
1. Disconnect the cable of accumulator from the negative
polar (-):
2. Tear down the steering wheel;
3. Tear down the combined switch shell cluster;
4. Tear down the bonnet lock switch;
Tear down the two screws and the sliding fastener of bonnet
lock.
5. Tear down the lower instrument cover;
6. Tear down the lower decorative frame of the instrument
panel;
Prize out the decorative frame of instrument with screwdriver
and take it down.
Notice: the screwdriver must be wrapped with adhesive
strap at its head before using.
7. Tear down the decorative cover of instrument;
(a) Tear down the three screws to pull out the decorative
cover of instrument.
(b) Disconnect the plugging elements.
8. Tear down the ashtray cluster;
9. Tear down the central cover;
(a) Tear down the three screws to pull out the central cover;
(b) Disconnect the plugging elements

B0-56Vehicle Body
Instrument Panel
10. Tear down the combination instrument;
(a) Tear down the four screws;
(b) Disconnect the plugging elements.
(c) Tear down the combination instrument.
11. Tear down the CD or combined acoustic device;
(a) Tear down the four screws;
(b) Disconnect the aerial cable and the plugging elements;
(c) Tear down the CD or the combined acoustic device.
12. Tear down the central air tunnel;
Tear down the four screws to take out the central air tunnel.
13. Tear down the air-conditioner controlling panel;
(a) Pull out the air-conditioner controlling button;
(b) Prize out the A/C switch;
(c) Prize out the air-conditioner controlling panel as shown
in the drawing with screwdriver and take it down.
Notice: the screwdriver should be wrapped with adhesive
strap at its head before using.
(d) Disconnect the plugging elements.
14. Tear down the air-conditioning controlling mechanism
assembly;
Tear down the two screws and let the air-conditioner control-
ling mechanism in suspension.
15. Tear down the lower covering board at right end;
Tear down the four screws and take out the lower covering
board at right end.
16. Tear down the glove box;
Tear down the two screws and the glove box
17. Tear down the instrument body;
(a) Tear down the three bolts and the instrument panel;
(b) Disconnect the plugging elements.
Mount of instrument panel
Mount the parts of instrument panel in the reverse
approach.

B0-65
Luggage rack
Element figure
Vehicle Body
Luggage Rack
bracket fastening
buttonmain sill
SF SY
antiskid strip
beamblanking plug of
main sill adjusting button of antiskid strip
fixed bracket
mounting plate of outer
luggage rack
adhesive strip of mounting plateluggage rack assembly
SJ

A-3
Fastening location N*m
Upper tooth(JK72TWD)
Fastening location N*m
Specification of Maintenance and Up-Keeping
Transfer Box
Maintenance and Up-keeping of Transfer Box
1. The oil level of transfer box should be checked when exchanging the engine lubricant or the vehicle
covers more than 8000 km
and add the lubricant where necessary.
2. Change with the appointed lubricant each year or after the vehicle covers more than 48000 km.
Notice: lubricant brand: 85W/90 GL-5.
Fastening torque of relative connecting elements
15
20
10
15
12
17
15
20
15
20
15
20
15
20
30
40
60
70
30
40
30
40
17
22
30
50
20
40
30
40
90
125 Toggle fork at first, second and fifth gears and the screw of
toggle fork
Bolt on odometer pressure plate
Screw on baffle of rear bearing of output shaft
Screw on baffle of reverse idler shaft
Locating screw of gearshift yoke block
Bolt of front cover
Bolt of gearshift cover
Pillar of clutch toggle fork
Bolt of clutch cover
Bolt of rear body (M10X1.25X130)
Bolt of rear body (M10X1.25X80)
Plug of locating spring
Oil filling/draining plug
Reverse gear switch assembly
Location mechanism cluster
Locking nut at rear end of countershaft
Fastening location N*m
Flange nut
Oil drain plug
Bolt of motor clip
Fixing bolt of motor
Clutch coil nut
Housing bolt
Oil pump bolt
Venting valve
Bolt of front connecting body203
244
19
30
8
11
8
11
8
11
27
46
4.0
8.5
8
19
27
46 Oil filling/draining plug
Location mechanism cluster
Pillar of clutch toggle fork
Bolt on odometer pressure plate
Reverse gear switch assembly30
50
30
50
30
50
10
15
30
50