Page 276 of 484
SR-20Steering system - Steering Linkage
Steering Linkage
Dismantle and mount of steering linkage
Nmspecified torque
Parts that cannot be reused after being used
side drag rod assembly
joint clip
intermediate lateral drag rod assembly
auxiliary steering arm
8010(Dr)
8310(SL SK SY)
14210(SF)
7810(SJ)
9110(Dr)
595(SF)
9110(Dr SF)
9010(SL SK SY)
7810(SJ)
Remark
(a) Where the bolts of recirculating ball are connected with
the arm or lever, the lubricant on its surface should be
cleaned.
(b) Screw up the bolts and nuts of re-circulating ball to the
specified torque, and then screw the nut forward to the
degree that the split pin can be encased in.
(c) Check the Alignment of Front Wheel and side slip after
any part of steering linkage is mounted.
Page 426 of 484
B0-43
Cargo body baffle
Element mounting position
Vehicle BodyCargo Body Baffle
baffle lock
connecting bar
2 screws
baffle lock controller
rear panel of cargo body
buffer block
hinge assembly
inner cover panel
bolt hole
14 screws
Dr SL SK
14 screws
(Dr SK)
14
Nmspecified torquecargo body
hinge
Dismantle of baffle lock
1. Tear down the inner cover panel.
(SL)
Tear down the 14 screws and the inner cover panel.
(Dr SK)
Tear down the 12 screws and the inner cover panel.
2. Disconnect the connecting bar of baffle lock from the
baffle lock controller.
3. Tear down the baffle slide fastener
(a) Tear down the baffle lock from the baffle.
(b) Tear down the two screws and the baffle lock.
4. Teardown the baffle from the baffle
Teardown the 12 screws and the baffle lock
Page 427 of 484
B0-44Vehicle BodyCargo Body Baffle
Mount of Baffle
1. Mount the baffle lock on the baffle;
Mount the baffle lock with two screws (Dr SK)
Mount the baffle lock with two nuts (SL)
2. Connect the connecting bar with the baffle lock controller.
3. Mount the baffle slide fastener;
(a) Mount the baffle slide fastener and bolts.
Fastening torque14Nm
(b) Connect the baffle slide fastener with the baffle.
4. Mount the baffle hinge on the baffle
5. Mount the inner coverpannel
SL)
Mount the inner cover panel with 14 screws;
Dr SK)
Mount the inner cover panel with 12 screws.
Dismantle of baffle lock controller:
1. Tear down the inner cover panel;
2. Disconnect the two baffle connecting bar;
3. Tear down the baffle lock controller
Tear down the two screws and the baffle lock controller; (Dr
SK)
Tear down the two nuts and the baffle lock controller. (SL)
Mount of baffle lock controller
Mount the baffle lock controller in the reverse order for
disassembly.
Page 440 of 484
B0-57
Safety belt ()
Element figure
Vehicle BodySafety Belt
Dr SL SK SF SY SJ
SF rear safety belt
Nmspecified torque
43
43
43
43
43
QP
43
43
front safety belt
Page 441 of 484
B0-58
Safety belt ()
Element figure
Vehicle Body Safety Belt
QP
43
QP
43
43
43
43
safety belt in
SY model
vehicle
43
safety belt in SJ
model vehicle
Nmspecified torque
Page 443 of 484
B0-60
Seat ()
Element figure
Vehicle BodySeat
Dr SL SK SF SY SJ
front seat
seat in SY
model vehicle
Nmspecified torque
37
37
37
37
18
18
18
18
Page 444 of 484
B0-61
Safety belt ()
Element figure
Vehicle BodySafety Belt
Dr rear seat
SL rear seat
Nmspecified torque
18
18
18
18
18
SY small seat18
18
18
Page 445 of 484
B0-62
Seat ()
Element figure
BodySeat
SF rear seat
18
18
18
18
18
18
18
SJ rear seat
Nmspecified torque
18
