Installation 6.
Torque:\b 1
7\fNm\f
7. Torque:\b 17\fNm
\f
1.NOTE:\fThe\f
c
o
mponent\f
must\fbe\f
inst\blled\f
within\f5\f
minutes\fof\f
\bpplying\f
the\f
se\bl\bnt.\f
Mater\fal:\b
Fl
\bnge\f
Se\bl
\bnt\f-\f
An\berobic\fLP\f
(WSK-
M2G348-
A7\f/\f
5U7J-
M2G348-BA) \f
2. T
o\finst\bll,\freverse\fthe\fremov\bl\fprocedure.\f
3. CAUTION:\fThe\ffluid\flevel\fmust\frem\bin\f
be
tween\fthe\fMAX\f\bnd\fMIN\fm\brks.\f
Mater\fal:\b En
gine\fOil\f-\f5W-30\f(WSS-M2C913-C) \f
\f\f
\f\f
\f\f
\f
Стр. 2 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543325&gui...procarmanuals.com
http://vnx.su
Engine - \b.5L \furatec (16\bkW/\b\b0PS) -
VI5 - Oil CoolerS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Materials
Gen
eral Equipment
Removal
N O
TE:\fRemov\bl\fsteps\fin\fthe\fprocedure\fm\by\fcont\bin\finst\b
ll\btion\fdet\bils.\f
Installation
NameSpec\bf\bcat\bo\f
Engine\fOil\f-\f5W-30WSS-M2C913-C
Fluid\fcont\biner
Hose\fcl\bmp(s) 1. \f
2. \f\fWARNING:\fBe\fprep\bred\fto\fcollect\f
e s
c\bping\ffluid.\f
General \bqui\fment: Fl
uid\fcont\biner\f
Tor
que: 38\fNm
\f
3. \f\f
WARNING:\fBe\fprep\bred\fto\fcollect\f
es
c\bping\ffluids.\f 1. General \bqui\fment: F
luid\fcont\biner\f
Gen
eral \bqui\fment: Hose\fcl\bmp(s)\f
2. To
rque: 3\fNm
\f
3. Torque: 17\fNm
\f
1. To\finst\bll,\freverse\fthe\fremov\bl\fprocedure.\f
2.CAUTION:\fM\bke\fsure\fth\bt\ffluid\flevel\fis\fto\f
t h
e\fMAX\fm\brk.\f
Refer\fto:\f Sp
ecific\btions\f(303-01D\fEngine\f-\f2.5L\f
\f\f
\f\f
\f
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G834604&gui...procarmanuals.com
http://vnx.su
Engine - \b.0L \furatorq-T\fCi (85kW/115PS) - \fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
(103kW/140PS) - \fW, Emission Requirements: Stage IV - Specifications
Engine \fata
Lu
bricants, Fluids, Sealers and Adhesives
Engine Oil Capacity
Cylinder Block
Pistons
Piston ring gap position: The piston ring gaps must be distributed evenly around the circumference of the piston. This also applies to the oil control ring elements. Align the piston ring gaps at 1\b0 degrees to each other.
Crankshaft
Connecting Rod
Descrip\bion
Engine c\bde
Firing \brder
E\fissi\bn level
B\bre
Str\bke
Cubic capacity
C\b\fpressi\bn rati\b
P\bwer \butput at 4000 rp\f
T\brque at 1750 rp\f
Maxi\fu\f engine speed (inter\fittent)
Maxi\fu\f engine speed (c\bntin\bus)
Idle speed
Oil c\bnsu\fpti\bn
I\be\f
Engine \bil
C\b\blant
Sealant
Initial fill including \bil filter
Service fill including \bil filter
Service fill with\but \bil filter
Descrip\bion
Cylinder b\bre dia\feter
Main bearing parent b\bre dia\feter
Main bearing clearance - radial
Descrip\bion
Pist\bn dia\feter
Pist\bn clearance in cylinder
Pist\bn ring end gaps
— upper c\b\fpressi\bn ring
— l\bwer c\b\fpressi\bn ring
— \bil c\bntr\bl ring
Descrip\bion
Main bearing j\burnal dia\feter
C\bnnecting r\bd bearing j\burnal dia\feter
Crankshaft end play
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G509595&gui...procarmanuals.com
http://vnx.su
Engine - \b.0L \furatorq-T\fCi (85kW/115PS) - \fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
(103kW/140PS) - \fW, Emission Requirements: Stage IV - Specifications
Engine \fata
Lu
bricants, Fluids, Sealers and Adhesives
Engine Oil Capacity
Cylinder Block
Pistons
Piston ring gap position: The piston ring gaps must be distributed evenly around the circumference of the piston. This also applies to the oil control ring elements. Align the piston ring gaps at 1\b0 degrees to each other.
Crankshaft
Connecting Rod
Descrip\bion
Engine c\bde
Firing \brder
E\fissi\bn level
B\bre
Str\bke
Cubic capacity
C\b\fpressi\bn rati\b
P\bwer \butput at 4000 rp\f
T\brque at 1750 rp\f
Maxi\fu\f engine speed (inter\fittent)
Maxi\fu\f engine speed (c\bntin\bus)
Idle speed
Oil c\bnsu\fpti\bn
I\be\f
F\brd F\br\fula E SAE 10W-30 M\bt\bröl
C\b\blant
Sealant
Initial fill including \bil filter
Service fill including \bil filter
Service fill with\but \bil filter
Descrip\bion
Cylinder b\bre dia\feter
Main bearing parent b\bre dia\feter
Main bearing clearance - radial
Descrip\bion
Pist\bn dia\feter
Pist\bn clearance in cylinder
Pist\bn ring end gaps
— upper c\b\fpressi\bn ring
— l\bwer c\b\fpressi\bn ring
— \bil c\bntr\bl ring
Descrip\bion
Main bearing j\burnal dia\feter
C\bnnecting r\bd bearing j\burnal dia\feter
Crankshaft end play
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1023048&gu...procarmanuals.com
http://vnx.su
consumptioncomponents.\fREFER\fto:\fEngine\fCooling \f(303-03F\fEngine\f
Coo
ling\f-\f2.2L\fDur\btorq-TDCi\f(129kW/175PS)\f
-\fDW,\fDi\bgnosis\f\bnd\fTesting).\f
Oil\fcooler.\f
*INSTALL\f\b\fnew\foil\fcooler.\f
*
D\bm\bged\fg\bskets\for\f
w\brped\fm\bting\ff\bces.\f
*CHECK\fthe\fcylinder\fhe\bd\fg\bsket\ffor\fd\bm\bge.\f
CHECK\fthe\fcylinder\fhe\bd\ffor\fdistortion.\f
*
Cr\bcks\for\ffr\bctures\fin\f
engine\fcomponents\f
surrounded\fby\fcool\bnt,\f
such\f\bs\fcylinder\fliners\f
\bnd\fcylinder\fhe\bd\f
combustion\fch\bmber.\f
*DETERMINE\fthe\fd\bm\bged\fengine\fcomponent
(s)\f\bnd\finst\bll\fnew\fcomponent(s)\f\bs\f
necess\bry.\f
*
Engine\fwill\fnot\f
cr\bnkB\bttery\for\fc\bbles.\f
*CHECK\fthe\fb\bttery,\fbr\bcket\f\bnd\fc\bbles.\f\f
*
St\brter\fmotor\for\fc\bbles.\f
*CHECK\fthe\fst\brting\fsystem.\fREFER\fto:\f
St\brting\fSystem \f(303-06E\fSt\brting\fSystem\f-\f
2.0
L\fDur\btorq-TDCi\f(85kW/115PS)\f-
\fDW/2.0L\f
Dur\btorq-TDCi\f(100kW/136PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(103kW/140PS)\f-\fDW,\f
Emission\fRequirements:\fSt\bge\fIV,\fDi\bgnosis\f
\bnd\fTesting).\f
*
Engine\fcr\bnks\fbut\f
will\fnot\fst\brt
Fuel\ft\bnk\fis\fempty.\f
*CHECK\fthe\ffuel\flevel.\f
*
W\bter\fin\ffuel.\f
*Dr\bin\fthe\fw\bter\ffrom\fthe\ffuel\fsystem.\f\f
*
Fuel\ffilter\fblocked.\f
*INSTALL\f\b\fnew\ffuel\ffilter.\fREFER\fto:\f Fuel\f
Fil
ter \f(310-01C\fFuel\fT\bnk\f\bnd\fLines\f-\f2.0L\f
Dur
\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(100kW/136PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(103kW/140PS)\f-\fDW,\f
Emission\fRequirements:\fSt\bge\fIV,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
*
Engine\fint\bke\f\bir\fsystem.\f*CHECK\fthe\fint\bke\f\bir\fsystem.\f\f
*
Glow\fplug\ff\bulty.\f
*CHECK\fthe\fglow\fplugs.\fINSTALL\fnew\fglow\f
plugs\f\bs\fnecess\bry.\fREFER\fto:\f Glow\fPlug\f
(30
3-07D\fGlow\fPlug\fSystem\f-\f2.0L\fDur\btorq-
TDCi\f(85kW/115PS)\f-\fDW/2.0L\fDur\btorq-
TDCi\f
(100kW/136PS)\f-\fDW/2.0L\fDur\btorq-TDCi\f
(103kW/140PS)\f-\fDW,\fEmission\f
Requirements:\fSt\bge\fIV,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
*
Engine\fm\bn\bgement\f
system.\f
*CHECK\fthe\fengine\fm\bn\bgement\fsystem.\f\f
*
Incorrect\fv\blve\ftiming.\f
*CHECK\f\bnd\f\bdjust\fthe\fv\blve\ftiming.\fREFER\f
to:\f Timing\fBelt \f(303-01F\fEngine\f-\f2.0L\f
Dur
\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(100kW/136PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(103kW/140PS)\f-\fDW,\f
Emission\fRequirements:\fSt\bge\fIV,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
*
Broken\for\fd\bm\bged\f
timing\fbelt/timing\fch\bin\f
or\fpulley/sprocket.\f
*CHECK\fthe\ftiming\fbelt/timing\fch\bin\f\bnd\f
sprockets/pulleys.\fINSTALL\fnew\fcomponents\f
\bs\fnecess\bry.\fREFER\fto:\f Timing\fBelt\f(303-
01F\f
Engine\f-\f2.0L\fDur\btorq-TDCi\f(85kW/115PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(100kW/136PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(103kW/140PS)\f-\f
DW,\fEmission\fRequirements:\fSt\bge\fIV,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
*
Very\fpoor\fpower\f
output\for\ffuel\f
consumption\ftoo\f
high\for\fengine\fFuel\fch\brging\fsystem.\f
*CHECK\fthe\ffuel\fch\brging\fsystem.\fREFER\fto:\f
Fuel\fCh\brging\f\bnd\fControls\f(303-04E\fFuel\f
Ch \br
ging\f\bnd\fControls\f-\f2.0L\fDur\btorq-TDCi\f
(85kW/115PS)\f-\fDW/2.0L\fDur\btorq-TDCi\f
*
Стр. 3 из
13
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549215&gui...procarmanuals.com
http://vnx.su
Engine - \b.\bL D\fratorq-TDCi
(1\b9kW/175PS) - DW - SpecificationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine Data
L\fbricants, Fl\fids, Sealers and Adhesives
Engine Oil Capacity
Cylinder Head
Oil Press\fre Specifications
Balance Shaft Meas\frement Shims
Balance Shaft Shims
Descrip\bion
Engine\fcodeQ4BA
Firing\forder1-3-4-2
Emission\flevelSt\bge\fIV
Bore85.0\fmm
Stroke96.0\fmm
Cubic\fc\bp\bcity2179\fcm³
Compression\fr\btio16.6:1
Power\foutput\f\bt\f3500\frpm129\fkW\f(170\fPS)
Torque\f\bt\f1750\frpm400\fNm
Idle\fspeed800\frpm
Oil\fconsumption0.1L\f/\f1000\fKm
I\be\fSpecifica\bion
Engine\foilWSS-M2C913-B
Cool\bntWSS-M97B44-D
Se\bl\bntWSE-M4G323-A4
Descrip\bionLi\bers
Initi\bl\ffill\fincluding\foil\ffilter6.5
Service\ffill\fwith\foil\ffilter5.9
Service\ffill\fwithout\foil\ffilter5.3
Descrip\bion\f\f
Thickness\fof\fcylinder\fhe\bd\fg\bsket\fwith\fpiston\fprotrusion\fof\f0.55\fto\f0.60\f
mm1.25\f±\f0.04\f(1\fhole)
Thickness\fof\fcylinder\fhe\bd\fg\bsket\fwith\fpiston\fprotrusion\fof\f0.61\fto\f0.65\f
mm1.30\f±\f0.04\f(2\f
holes)
Thickness\fof\fcylinder\fhe\bd\fg\bsket\fwith\fpiston\fprotrusion\fof\f0.66\fto\f0.70\f
mm1.35\f±\f0.04\f(3\fholes)
Thickness\fof\fcylinder\fhe\bd\fg\bsket\fwith\fpiston\fprotrusion\fof\f0.71\fto\f0.75\f
mm1.40\f±\f0.04\f(4\fholes)
M\bximum\fdistortion\f—\fme\bsured\flongitudin\blly\f\bnd\fdi\bgon\blly0.03
Descrip\bionbar
Oil\fpressure\f\bt\f2000\frpm2.0
Oil\fpressure\f\bt\f4000\frpm4.0
Shi\f \bhickness \f\fShi\f \farking
1.5757
Mini\fu\f clearance \f\fShi\f \bhickness \f\fShi\f \farking
0.01\f-\f0.051.5757
0.051.5151
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1043350&gu...procarmanuals.com
http://vnx.su
Description
C\b\blant return
Oil filter \f\busing
Oil pressure switc\f
Oil c\b\bler
C\b\blant feed
T\fe \bil filter/\bil c\b\bler unit is l\bcated \bn t\fe intake side \bf t\fe engine, level wit\f t\fe t\fird cylinder.
T\fe \bil filter element (paper filter element) is l\bcated in t\fe \bil filter \f\busing.
T\fe c\b\blant is r\buted fr\bm t\fe cylinder bl\bck int\b t\fe \bil c\b\bler via t\fe c\b\blant feed. T\fe c\b\blant is r\buted t\b t\fe t\ferm\bstat
\f\busing \bf t\fe c\b\bling system via t\fe c\b\blant return.
Intake manifold
T\fe intake manif\bld is designed s\b t\fat t\fe c\farge air is r\buted t\b all eig\ft intake ducts in a c\bntr\blled manner.
Furt\ferm\bre, t\fe gas fr\bm t\fe p\bsitive crankcase ventilati\bn system and fr\bm t\fe EGR (ex\faust gas recirculati\bn)
returned t\b t\fe intake manif\bld. T\fe seal wit\f t\fe intake ducts at t\fe cylinder \fead is pr\bvided:
by means \bf \bne O-ring f\br eac\f \bf t\fe f\bur l\bwer swirl ducts,
by means \bf \bne rubber seal f\br eac\f \bf t\fe f\bur upper c\farge ducts.
Note: W\fen fitting t\fe intake manif\bld, ensure t\fat t\fe O-
rings/rubber seals are seated c\brrectly.
T\fe intake manif\bld is b\blted t\b t\fe cylinder \fead using a t\btal \bf seven retaining b\blts. Item
1
2
3
4
5
Стр. 16 из 21
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048763&gu...procarmanuals.com
http://vnx.su
\bnd\fInst\bll\btion).\f
Cool\bnt\fpump.\f
*INSPECT\fthe\fcool\bnt\fpump\ffor\fle\bks.\fCARRY\fOUT\f
the\fPressure\fTest\fComponent\fTest\fin\fthis\fsection.\f
INSTALL\f\b\fnew\fcool\bnt\fpump\for\fcool\bnt\fpump\f
g\bsket\f\bs\fnecess\bry.\f\f
REFER\fto:\f Cool\bnt\fPump \f(303-
03C\fEngine\fCooling\f
-\f2.5L\fDur\btec\f(162kW/220PS)\f-\fVI5,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
*
Thermost\bt\f
housing.\f
*INSPECT\fthe\fthermost\bt\fhousing\ffor\fle\bks.\f
CARRY\fOUT\fthe\fPressure\fTest\fComponent\fTest\fin\f
this\fsection.\fINSTALL\f\b\fnew\fthermost\bt\fhousing\f
\bnd\fthermost\bt\fhousing\fg\bsket\f\bs\fnecess\bry.\f\f
REFER\fto:\f Thermost\bt\fHousing \f(303-03C\fEngine\f
Co o
ling\f-\f2.5L\fDur\btec\f(162kW/220PS)\f-\fVI5,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
*
Cool\bnt\f
exp\bnsion\ft\bnk\f
c\bp\for\fse\bl(s).\f
*CHECK\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\ffor\f
tightness\f\bnd\fd\bm\bge.\fINSTALL\f\b\fnew\fcool\bnt\f
exp\bnsion\fc\bp\f\bs\fnecess\bry.\f
*
Cool\bnt\f
exp\bnsion\ft\bnk.\f
*INSPECT\fthe\fcool\bnt\fexp\bnsion\ft\bnk\ffor\fd\bm\bge.\f
INSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\f\bs\f
necess\bry.\f
*
He\bter\fcore.\f
*CHECK\fthe\fhe\bter\fcore\ffor\fle\bks.\f
*
Engine.\f
*INSPECT\fthe\fengine,\fcylinder\fhe\bd,\fcylinder\fblock\f
\bnd\fcylinder\fhe\bd\fg\bsket.\f\f
REFER\fto:\f Cylinder\fHe\bd \f(303-01D\fEngine\f-\f2.5L\f
Dur
\btec\f(162kW/220PS)\f-\fVI5,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
*
The\fengine\foverhe\bts\f
(signs\fof\fcool\bnt\f
boiling)
Air\fin\fcooling\f
system.\f
*BLEED\fthe\fcooling\fsystem.\f\f
REFER\fto:\fCooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Bleeding\f(303-03\fEngine\fCooling\f-\f2.5L\fDur\btec-
ST\f(VI5),\fGener\bl\fProcedures).\f
*
R\bdi\btor\fgrille.\f
*INSPECT\fthe\fr\bdi\btor\fgrille\ffor\f\bir\frestrictions\for\f
d\bm\bge.\fREPAIR\for\fINSTALL\fnew\fp\brts\f\bs\f
necess\bry.\f
*
Cool\bnt\f
exp\bnsion\ft\bnk\f
c\bp\for\fse\bl(s).\f
*CHECK\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\ffor\f
tightness\f\bnd\fd\bm\bge.\fINSTALL\f\b\fnew\fcool\bnt\f
exp\bnsion\fc\bp\f\bs\fnecess\bry.\f
*
Cool\bnt\f
exp\bnsion\ft\bnk.\f
*INSPECT\fthe\fcool\bnt\fexp\bnsion\ft\bnk\ffor\fd\bm\bge.\f
INSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\f\bs\f
necess\bry.\f
*
Cool\bnt\flevel\for\f
condition.\f
*CHECK\fthe\fcool\bnt\flevel.\fREFILL\fthe\fcooling\f
system\f\bs\fnecess\bry.\f\f
REFER\fto:\fCooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Bleeding\f(303-03\fEngine\fCooling\f-\f2.5L\fDur\btec-
ST\f(VI5),\fGener\bl\fProcedures).\f CHECK\fthe\fcool\bnt\fcondition.\fIf\fthe\fcool\bnt\fis\fin\f
poor\fcondition\fdr\bin\f\bnd\frefill\fwith\fnew\fcool\bnt.\f\f
REFER\fto:\fCooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Bleeding\f(303-03\fEngine\fCooling\f-\f2.5L\fDur\btec-
ST\f(VI5),\fGener\bl\fProcedures).\f
*
*
Cool\bnt\f
concentr\btion.\f
*REFER\fto:\fSpecific\btions\f(303-03\fEngine\fCooling\f
-\f2.5L\fDur\btec-ST\f(VI5),\fSpecific\btions).\f
*
Cooling\fsystem\f
does\fnot\fhold\f
pressure.\f
*INSPECT\fthe\fcool\bnt\fexp\bnsion\ft\bnk\ffor\fd\bm\bge.\f
INSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\f\bs\f
necess\bry.\f
*
Cooling\ff\bn.\f
*CHECK\fthe\foper\btion\fof\fthe\fcooling\ff\bn.\fREFER\fto\f
the\fFord\f\bpproved\fdi\bgnostic\ftool.\f
*
Thermost\bt.\f
*CARRY\fOUT\fthe\fThermost\bt\fTest\fComponent\fTest\f*
Стр. 2 из 7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506748&gui...procarmanuals.com
http://vnx.su