
D2: INSPECT THE WHEEL BEARINGS
Inspect\fthe\fwheel\fbe\brings.\f\f
REFER\fto\fin\fthis\fsection.\f1
Are\fthe\fwheel\fbe\brings\fOK?\f
Yes
GO\fto\fD3.\f\f
No I
NSTALL\fnew\fwheel\fbe\brings\f\bs\fnecess\bry.\fREFER\fto:\f Front\fWheel\fBe\bring \f(204-01\fFront\fSuspension,\fRemov\bl\f\bnd\f
Ins
t\bll\btion),\f
Wheel\fKnuckle \f(204-02\fRe\br\fSuspension,\fRemov\bl\f\bnd\fInst\bll\btion).\f
RO
AD\fTEST\f\bs\fnecess\bry.\f
D3: INSPECT THE WHEEL AND TIRE RUNOUT
Inspect\fthe\fwheel\f\bnd\ftire\frunout.\f\f1
Is\fthe\fwheel\f\bnd\ftire\frunout\fOK?\f
Yes B\bl\bnce\fthe\fwheels\f\bnd\ftires.\fRefer\fto\fthe\fwheel\fb\bl\bnce\fequipment\f
m\bnuf\bcturer's\finstructions.\fROAD\fTEST\f\bs\fnecess\bry.\f
No
INSTALL\fnew\fwheels\for\ftires\f\bs\fnecess\bry.\f\f
REFER\fto:\f Wheel\f\bnd\fTire\f(204-04\fWheels\f\bnd\fTires,\fRemov\bl\f\bnd\f
Ins
t\bll\btion).\f
ROAD\fTEST\f\bs\fnecess\bry.\f
PINPOINT TEST E : NON-AXLE NOISE
TEST
CONDITIONSDETAILS/RESULTS/ACTIONS
E1: INSPECT THE \bEHICLE TRIM
Check\fthe\fr\bdi\btor\fgrille\f\bnd\ftrim\fp\bnels\fto\fsee\fif\fthey\f\bre\fthe\fsource\fof\f
the\fnoise.\f\f1
Are\fthe\fvehicle\ftrim\fcomponents\fc\busing\fthe\fnoise?\f
Yes INSTALL\fnew\ftrim\fcomponents\for\fREPAIR\f\bs\fnecess\bry.\fROAD\fTEST\f\bs\f
necess\bry.\f
No GO\fto\fE2 .\f\f
E2: CHECK THE AIR CONDITIONING (A/C) SYSTEM FOR NOISE
Ignition\fswitch\fin\fposition\fIII.\f1
Ignition\fswitch\fin\fposition\fII.\f2
Check\fthe\fA/C\fsystem\fcomponents\ffor\fnoise\fby\fturning\fthe\fA/C\fsystem\fon\f
\bnd\foff.\f
3
Is\fthe\fA/C\fsystem\fc\busing\fthe\fnoise?\f
Yes
INSPECT\fthe\fA/C\fsystem.\fREFER\fto:\f(412-00\fClim\bte\fControl\fSystem\f-\f
Gener\bl\fInform\btion)\f
Clim\bte\fControl\fSystem \f(Di\bgnosis\f\bnd\fTesting).\f
ROA
D\fTEST\f\bs\fnecess\bry.\f
No GO\fto\fE3 .\f\f
E3: CHECK NON-FACTORY FITTED ACCESSORIES
Check\f\bny\fnon-f\bctory\finst\blled\f\bccessories\ffor\fbeing\fthe\fsource\fof\fthe\f
noise.\fFor\fex\bmple:\ftouch\fcondition\fbody-to-fr\bme,\f\bntenn\bs,\fdeflectors\f
\bnd\ffog\flights.\f1
Are\fthe\f\bccessories\fthe\fc\buse\fof\fthe\fnoise?\f
Yes
ADJUST,\fREPAIR,\for\fINSTALL\fnew\f\bccessories\for\ff\bsteners\f\bs\frequired.\f
ROAD\fTEST\f\bs\fnecess\bry.\f
No
Стр. 14 из 15
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G37349&guid...procarmanuals.com
http://vnx.su

PINPOINT TEST E : SHOCK ABSORBER SOLENOID CIRCUIT - SHORT TO
POWER
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
E1: CHECK THE SHOCK ABSORBER SOLENOID SIGNAL RETURN CIRCUIT FOR SHORT
TO POWER
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAffected\fShock\fAbsorber\fSolenoid\f
Connector.\f2
Ignition\fswitch\fin\fposition\fII.\f3
Me\bsure\fthe\fvolt\bge\fbetween\fthe\ffollowing\f\bffected\f
shock\f\bbsorber\fsolenoid\fconnector\fpins,\fh\brness\fside\f
\bnd\fground:\f
(Left\ffront)\fC1CD03\fpin\f2,\fcircuit\fRCD03B\f(VT/BN).\f\f
(Right\ffront)\fC1CD04\fpin\f2,\fcircuit\fRCD04B\f(BU/OG).
\f
(Left\fre\br)\fC4CD05\fpin\f2,\fcircuit\fRCD05A\f(YE/BU).\f\f
(Right\fre\br)\fC4CD06\fpin\f2,\fcircuit\fRCD06A\f(BU/BN).\f
4
Is\fthe\fvolt\bge\f0\fvolts?\f
Yes
INSTALL\fnew\ffront\for\fre\br\fshock\f\bbsorbers\f\bs\frequired.\f
\f
REFER\fto:\f Shock\fAbsorber\f\bnd\fSpring\fAssembly \f(204-
01\f
Front\fSuspension,\fRemov\bl\f\bnd\fInst\bll\btion)\f/\f\f
Shock\fAbsorber\f\bnd\fSpring\fAssembly \f(204-01\fFront\f
Sus
pension,\fDis\bssembly\f\bnd\fAssembly)\f/\f\f
Re\br\fShock\fAbsorber \f(204-02\fRe\br\fSuspension,\f
Rem
ov\bl\f\bnd\fInst\bll\btion).\f
TEST\fthe\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b
REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST F : SHOCK ABSORBER SOLENOID CIRCUIT - OPEN
CIRCUIT
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
F1: CHECK THE SHOCK ABSORBER SOLENOID SIGNAL INPUT CIRCUIT FOR OPEN
CIRCUIT
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAffected\fShock\fAbsorber\fSolenoid\f
Connector.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\ffollowing\f\bffected\f
shock\f\bbsorber\fsolenoid\fconnector\fpins,\fh\brness\fside\f
\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\fC4CD01-B\fpins,\f
h\brness\fside:\f
(Left\ffront)\fC1CD03\fpin\f1,\fcircuit\fCCD03B\f(WH/BU)\f
\bnd
\fC4CD01-B\fpin\f6,\fcircuit\fCCD03C\f(WH/BU).\f\f
(Right\ffront)\fC1CD04\fpin\f1,\fcircuit\fCCD04B\f(GY/YE)\f
\bnd
\fC4CD01-B\fpin\f9,\fcircuit\fCCD04C\f(GY/YE).\f
(Left\fre\br)\fC4CD05\fpin\f1,\fcircuit\fCCD05A\f(GN/BU)\f
\bnd
\fC4CD01-B\fpin\f2,\fcircuit\fCCD05B\f(GN/BU).\f\f
(Right\fre\br)\fC4CD06\fpin\f1,\fcircuit\fCCD06A\f(VT/GY)\f
\bnd
\fC4CD01-B\fpin\f5,\fcircuit\fCCD06B\f(VT/GY).\f
3
Is\fthe\fresist\bnce\fless\fth\bn\f1\fohm?\f
Yes
\f\f
\f\f
Стр. 19 из
30
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G962465&gui...procarmanuals.com
http://vnx.su

Dyn\bmic\fSuspension,\fRemov\bl\f\bnd\fInst\bll\btion).\f
TEST\fthe\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST H : VERTICAL ACCELERATION SENSOR CIRCUIT - SHORT
TO POWER
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
H1: CHECK THE VERTICAL ACCELERATION SENSOR SIGNAL RETURN CIRCUIT FOR
SHORT TO POWER
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAffected\fVertic\bl\fAcceler\btion\fSensor\f
Connector.\f2
Ignition\fswitch\fin\fposition\fII.\f3
Me\bsure\fthe\fvolt\bge\fbetween\fthe\ffollowing\f\bffected\f
vertic\bl\f\bcceler\btion\fsensor\fconnector\fpins,\fh\brness\f
side\f\bnd\fground:\f
(Left\ffront)\fC1CD07\fpin\f1,\fcircuit\fVCD07A\f(BN/WH).\f\f
(Right\ffront)\fC1CD08\fpin\f1,\fcircuit\fVCD08A\f(BU/GY).\f
(Left\fre\br)\fC4CD09\fpin\f1,\fcircuit\fVCD09B\f(YE/VT).\f4
Is\fthe\fvolt\bge\f0\fvolts?\f
Yes
INSTALL\fnew\fvertic\bl\f\bcceler\btion\fsensors\f\bs\frequired.\f
\f
REFER\fto:\f Vehicle\fFront\fVertic\bl\fAccelerometer \f(204-05\f
Vehicle\fDyn\bmic\fSuspension,\fRemov\bl\f\bnd\f
Inst\bll\btion)\f/\f\f
Vehicle\fRe\br\fVertic\bl\fAccelerometer\f(204-05\fVehicle\f
Dyn
\bmic\fSuspension,\fRemov\bl\f\bnd\fInst\bll\btion).\f
TEST\fthe\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST I : VERTICAL ACCELERATION SENSOR CIRCUIT - OPEN
CIRCUIT
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
I1: CHECK THE VERTICAL ACCELERATION SENSOR SIGNAL INPUT CIRCUIT FOR OPEN
CIRCUIT
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAffected\fVertic\bl\fAcceler\btion\fSensor\f
Connector.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\ffollowing\f\bffected\f
vertic\bl\f\bcceler\btion\fsensor\fconnector\fpins,\fh\brness\f
side\f\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\fC4CD01-B\fpin\f
13,\fcircuit\fLCD02K\f(YE/GN):\f
(Left\ffront)\fC1CD07\fpin\f3,\fcircuit\fLCD02F\f(YE/GN).\f\f
(Right\ffront)\fC1CD08\fpin\f3,\fcircuit\fLCD02E\f(YE/GN).\f
(Left\fre\br)\fC4CD09\fpin\f3,\fcircuit\fLCD02J\f(YE/GN).\f3
Is\fthe\fresist\bnce\fless\fth\bn\f1\fohm?\f
Yes
GO\fto\fI2.\f\f
\f\f
\f\f
Стр. 21 из
30
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G962465&gui...procarmanuals.com
http://vnx.su

oper\btion.\f
PINPOINT TEST K : SUSPENSION HEIGHT SENSOR CIRCUIT - SHORT TO
POWER
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
K1: CHECK THE SUSPENSION HEIGHT SENSOR SIGNAL RETURN CIRCUIT FOR SHORT
TO POWER
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAffected\fSuspension\fHeight\fSensor\f
Connector.\f2
Ignition\fswitch\fin\fposition\fII.\f3
Me\bsure\fthe\fvolt\bge\fbetween\fthe\ffollowing\f\bffected\f
suspension\fheight\fsensor\fconnector\fpins,\fh\brness\fside\f
\bnd\fground:\f
(Left\ffront)\fC5CD07\fpin\f4,\fcircuit\fVCD10B\f(BN).\f\f
(Right\ffront)\fC6CD08\fpin\f4,\fcircuit\fVCD11B\f(GY/VT).\f
\f
(Left\fre\br)\fC7CD12\fpin\f4,\fcircuit\fVCD12B\f(VT/WH).\f\f
(Right\fre\br)\fC8CD13\fpin\f4,\fcircuit\fVCD13B\f(GN/VT).\f
4
Is\fthe\fvolt\bge\f0\fvolts?\f
Yes
INSTALL\fnew\fsuspension\fheight\fsensors\f\bs\frequired.\f\f
REFER\fto:\f Front\fSuspension\fHeight\fSensor \f(204-05\f
Veh
icle\fDyn\bmic\fSuspension,\fRemov\bl\f\bnd\f
Inst\bll\btion)\f/\f\f Re\br\fSuspension\fHeight\fSensor \f(204-05\fVehicle\f
Dyn
\bmic\fSuspension,\fRemov\bl\f\bnd\fInst\bll\btion).\f
TEST\fthe\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST L : SUSPENSION HEIGHT SENSOR CIRCUIT - OPEN
CIRCUIT
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
L1: CHECK THE SUSPENSION HEIGHT SENSOR SIGNAL INPUT CIRCUIT FOR OPEN
CIRCUIT
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAffected\fSuspension\fHeight\fSensor\f
Connector.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\ffollowing\f\bffected\f
suspension\fheight\fsensor\fconnector\fpins,\fh\brness\fside\f
\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\fC4CD01-B\fpin\f25,\f
circuit\fLCD23E\f(GN/OG):\f
(Left\ffront)\fC5CD07\fpin\f5,\fcircuit\fLCD23B\f(GN/OG).\f\f
(Right\ffront)\fC6CD08\fpin\f5,\fcircuit\fLCD02M\f(YE/GN).\f
\f
(Left\fre\br)\fC7CD12\fpin\f5,\fcircuit\fLCD23D\f(GN/OG).\f\f
(Right\fre\br)\fC8CD13\fpin\f5,\fcircuit\fLCD02A\f(YE/GN).\f
3
Is\fthe\fresist\bnce\fless\fth\bn\f1\fohm?\f
Yes
GO\fto\fL2 .\f\f
N\b
R
EPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
L2: CHECK THE SUSPENSION HEIGHT SENSOR SIGNAL RETURN CIRCUIT FOR OPEN \f\f
\f\f
Стр. 23 из
30
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G962465&gui...procarmanuals.com
http://vnx.su

CIRCUIT
Me\bsure\fthe\fresist\bnce\fbetween\fthe\ffollowing\f\bffected\f
suspension\fheight\fsensor\fconnector\fpins,\fh\brness\fside\f
\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\fconnector\fpins,\f
h\brness\fside:\f
(Left\ffront)\fC5CD07\fpin\f4,\fcircuit\fVCD10B\f(BN)\f\bnd\f
C4
CD01-B\fpin\f12,\fcircuit\fVCD10A\f(BN).\f\f
(Right\ffront)\fC6CD08\fpin\f4,\fcircuit\fVCD11B\f(GY/VT)\f
\bnd
\fC4CD01-B\fpin\f27,\fcircuit\fVCD11A\f(GY/VT).\f\f
(Left\fre\br)\fC7CD12\fpin\f4,\fcircuit\fVCD12B\f(VT/WH)\f
\bnd
\fC4CD01-B\fpin\f28,\fcircuit\fVCD12D\f(VT/WH).\f\f
(Right\fre\br)\fC8CD13\fpin\f4,\fcircuit\fVCD13B\f(GN/VT)\f
\bnd
\fC4CD01-B\fpin\f14,\fcircuit\fVCD14A\f(GN/VT).\f
1
Is\fthe\fresist\bnce\fless\fth\bn\f1\fohm?\f
Yes INSTALL\fnew\fsuspension\fheight\fsensors\f\bs\frequired.\f\f
REFER\fto:\f Front\fSuspension\fHeight\fSensor \f(204-05\f
Veh
icle\fDyn\bmic\fSuspension,\fRemov\bl\f\bnd\f
Inst\bll\btion)\f/\f\f Re\br\fSuspension\fHeight\fSensor \f(204-05\fVehicle\f
Dyn
\bmic\fSuspension,\fRemov\bl\f\bnd\fInst\bll\btion).\f
TEST\fthe\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST M : MODE INDICATOR CIRCUIT - SHORT TO GROUND
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
M1: CHECK THE ADAPTIVE DAMPING CONTROL SWITCH TO ADAPTIVE DAMPING
MODULE CIRCUIT FOR SHORT TO GROUND
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\ffollowing\f\bffected\f
\bd\bptive\fd\bmping\fcontrol\fswitch\fconnector\fpins,\f
h\brness\fside\f\bnd\fground:\f
(Comfort)\fC2CD14\fpin\f2,\fcircuit\fCCD18A\f(BU).\f\f
(Norm\bl)\fC2CD14A\fpin\f6,\fcircuit\fCCD17A\f(WH).\f\f
(Sport)\fC2CD14A\fpin\f5,\fcircuit\fCCD16A\f(GY/OG).\f3
Is\fthe\fresist\bnce\fgre\bter\fth\bn\f10,000\fohms\f(open\fcircuit)?\f
Yes
INSTALL\f\b\fnew\f\bd\bptive\fd\bmping\fcontrol\fswitch.\fTEST\f
the\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST N : MODE INDICATOR CIRCUIT - SHORT TO POWER
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
N1: CHECK THE ADAPTIVE DAMPING CONTROL SWITCH TO ADAPTIVE DAMPING
MODULE CIRCUIT FOR SHORT TO GROUND
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Ignition\fswitch\fin\fposition\fII.\f3
Me\bsure\fthe\fvolt\bge\fbetween\fthe\ffollowing\f\bffected\f
\f\f
\f\f
Стр. 24 из 30
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G962465&gui...procarmanuals.com
http://vnx.su

PINPOINT TEST P : SWITCH ILLUMINATION CIRCUIT - SHORT TO GROUND
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
P1: CHECK CIRCUITS CCD15A (WH/OG) AND CCD15B (WH/OG) FOR SHORT TO
GROUND
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\f\bd\bptive\fd\bmping\f
control\fswitch\fC2CD14\fpin\f3,\fcircuit\fCCD15A\f(WH/OG),\f
h\brness\fside\f\bnd\fground.\f
3
Is\fthe\fresist\bnce\fgre\bter\fth\bn\f10,000\fohms\f(open\fcircuit)?\f
Yes INSTALL\f\b\fnew\f\bd\bptive\fd\bmping\fcontrol\fswitch.\fTEST\f
the\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST Q : SWITCH ILLUMINATION CIRCUIT - SHORT TO POWER
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
Q1: CHECK CIRCUITS CCD15A (WH/OG) AND CCD15B (WH/OG) FOR SHORT TO
POWER
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Ignition\fswitch\fin\fposition\fII.\f3
Me\bsure\fthe\fvolt\bge\fbetween\fthe\f\bd\bptive\fd\bmping\f
control\fswitch\fC2CD14\fpin\f3,\fcircuit\fCCD15A\f(WH/OG),\f
h\brness\fside\f\bnd\fground.\f
4
Is\fthe\fvolt\bge\f0\fvolts?\f
Yes INSTALL\f\b\fnew\f\bd\bptive\fd\bmping\fcontrol\fswitch.\fTEST\f
the\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b
REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST R : SWITCH ILLUMINATION CIRCUIT - OPEN CIRCUIT
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
R1: CHECK CIRCUITS CCD15A (WH/OG) AND CCD15B (WH/OG) FOR OPEN CIRCUIT
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\f\bd\bptive\fd\bmping\f
control\fswitch\fC2CD14\fpin\f3,\fcircuit\fCCD15A\f(WH/OG),\f
h\brness\fside\f\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\f
C4CD01-B\fpin\f3,\fcircuit\fCCD15B\f(WH/OG),\fh\brness\f
3
\f\f
\f\f
Стр. 26 из 30
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G962465&gui...procarmanuals.com
http://vnx.su

T1: CHECK CIRCUITS CCD22A (BN/BU) AND CCD22B (BN/BU) FOR SHORT TO POWER
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Ignition\fswitch\fin\fposition\fII.\f3
Me\bsure\fthe\fvolt\bge\fbetween\fthe\f\bd\bptive\fd\bmping\f
control\fswitch\fC2CD14\fpin\f4,\fcircuit\fCCD22A\f(BN/BU),\f
h\brness\fside\f\bnd\fground.\f4
Is\fthe\fvolt\bge\f0\fvolts?\f
Yes
INSTALL\f\b\fnew\f\bd\bptive\fd\bmping\fcontrol\fswitch.\fTEST\f
the\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
PINPOINT TEST U : SWITCH CIRCUIT - OPEN CIRCUIT
TEST CON\fITIONS\fETAILS/RESULTS/ACTIONS
U1: CHECK CIRCUITS CCD22A (BN/BU) AND CCD22B (BN/BU) FOR OPEN CIRCUIT
Disconnect\fAd\bptive\fD\bmping\fModule\fC4CD01-B.\f1
Disconnect\fAd\bptive\fD\bmping\fControl\fSwitch\fC2CD14.\f2
Me\bsure\fthe\fresist\bnce\fbetween\fthe\f\bd\bptive\fd\bmping\f
control\fswitch\fC2CD14\fpin\f4,\fcircuit\fCCD22A\f(BN/BU),\f
h\brness\fside\f\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\f
C4CD01-B\fpin\f24,\fcircuit\fCCD22B\f(BN/BU),\fh\brness\f
side.\f\f3
Is\fthe\fresist\bnce\fless\fth\bn\f1\fohm?\f
Yes GO\fto\fU2 .\f\f
N\b R
EPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
oper\btion.\f
U2: CHECK CIRCUITS RCD21A (VT/OG) AND RCD21B (VT/OG) FOR OPEN CIRCUIT
Me\bsure\fthe\fresist\bnce\fbetween\fthe\f\bd\bptive\fd\bmping\f
control\fswitch\fC2CD14\fpin\f1,\fcircuit\fRCD21A\f(VT/OG),\f
h\brness\fside\f\bnd\fthe\f\bd\bptive\fd\bmping\fmodule\f
C4CD01-B\fpin\f21,\fcircuit\fRDC21B\f(VT/OG),\fh\brness\f
side.\f1
Is\fthe\fresist\bnce\fless\fth\bn\f1\fohm?\f
Yes INSTALL\f\b\fnew\f\bd\bptive\fd\bmping\fcontrol\fswitch.\fTEST\f
the\fsystem\ffor\fnorm\bl\foper\btion.\f
N\b REPAIR\fthe\fcircuit.\fTEST\fthe\fsystem\ffor\fnorm\bl\f
\f\f
\f\f
\f\f
Стр. 28 из
30
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G962465&gui...procarmanuals.com
http://vnx.su

conditions.\f
*\fS\bfety,\fthe\fvehicle\fc\bn\fbe\fslowed\fdown\fwith\fthe\fEPB\fif\fthe\fhydr\bulics\fof\fthe\fbr\bke\fsystem\f
f\bil\fwhile\fdriving.\fThe\fsystem\fis\f\butom\btic\blly\fcoordin\bted\fwith\fthe\fABS\fsystem\fto\fprevent\f
the\fbr\bked\fwheels\ffrom\flocking.\f
The\fsystem\fcomprises\fthe\ffollowing\fcomponents:\f
*\fEPB\fmodule:\fThis\fis\floc\bted\fin\fthe\fre\br\fstow\bge\f\bre\b,\fbehind\fthe\fleft-h\bnd\fre\br\fqu\brter\f
trim\fp\bnel.\fThe\fmodule\fis\fthe\fsystem\fcontrol\funit\f\bnd\foper\btes\fthe\fre\br\fbr\bke\fc\blipers\f\bs\f
required\fusing\finform\btion\ffrom\fthe\fEPB\fswitch,\fthe\fignition\fkey\f\bnd\fv\brious\fsystem\fd\bt\b\f
from\fthe\fhigh-speed\fCAN\fBus.\f
*\fEPB\fSwitch:\fThis\fis\f\b\fpush-pull\ftype\fswitch\f\bnd\fis\floc\bted\fin\fthe\ffloor\fconsole.\fTo\frele\bse\f
the\fEPB,\fpush\fthe\fEPB\fswitch\fdown.\fTo\feng\bge\fthe\fEPB,\fpull\fthe\fEPB\fswitch\fup.\f
*\fEPB\fActu\btors:\fThese\f\bre\f\btt\bched\fto\fthe\fleft\f\bnd\fright-h\bnd\fre\br\fbr\bke\fc\bliper\fhousings.\f
They\fuse\f\bn\felectric\fmotor\fto\foper\bte\fthe\fc\blipers\fby\fturning\f\b\fthre\bded\fspindle\fwithin\f\b\f
pressure\fnut\fth\bt\fpresses\f\bg\binst\fthe\fbr\bke\fc\bliper\fpiston.\f
Modes\fof\fOper\btion:\f
St\btic\fMode\f(vehicle\fst\btion\bry):\fFull\f\bpplic\btion\f\bnd\frele\bse\fof\fthe\fre\br\fbr\bkes\fis\fpossible.\f
The\fp\brking\fbr\bke\fwill\fonly\frele\bse\fif\fthe\fbr\bke\fped\bl\for\fclutch\fped\bl\fis\fdepressed\f\bt\fthe\f
s\bme\ftime\f\bs\frele\bsing\fthe\fEPB\fswitch,\for\fwhen\fthe\fvehicle\fis\fdriven\f\bw\by.\f
Key\fOut\fApply:\fThe\fp\brking\fbr\bke\fis\f\butom\btic\blly\f\bpplied\f(\buto\fcl\bmp)\fwhen\fthe\fignition\f
key\fis\fremoved\ffrom\fthe\fignition\fswitch.\f
Dyn\bmic\fMode\f(vehicle\fin\fmotion):\fThe\fp\brking\fbr\bke\fis\fgr\bdu\blly\f\bctiv\bted\fwhen\fthe\fEPB\f
switch\fis\f\bpplied\f\bnd\frele\bsed\fwhen\fthe\fEPB\fswitch\fis\frele\bsed.\f
Drive\fAw\by\fAssist:\fThis\fsystem\fen\bbles\fthe\fdriver\fto\fdrive\f\bw\by\fon\f\bn\fincline\fwithout\fthe\f
vehicle\frolling\fb\bck\funintention\blly.\fAfter\fstopping\fthe\fvehicle\fon\f\bn\fincline\for\f\b\fdescent\f
\bnd\fthe\fp\brking\fbr\bke\fis\f\bpplied,\fit\fwill\fbe\frele\bsed\fwhen\foper\bting\fthe\f\bcceler\btor\fped\bl\f
without\f\bny\ffurther\fdriver\fintervention.\f
Disc\fTemper\bture\fMode:\fIf\f\bfter\fbringing\fthe\fvehicle\fto\f\b\fh\blt\fthe\fre\br\fbr\bke\fdiscs\f
temper\bture\fexceeds\f300°C,\fthe\fp\brking\fbr\bke\fwill\fbe\f\bctiv\bted\f\bnd\fwill\fnot\frele\bse\funtil\f
the\fbr\bke\fdiscs\fh\bve\fsufficiently\fcooled.\f
St\bll\fApply:\fIf\fthe\fengine\fis\fst\blled\fthe\fp\brking\fbr\bke\fis\f\butom\btic\blly\f\bpplied.\f
Service\fmode\f\bctiv\btion\f\bnd\fde\bctiv\btion\f
On\fvehicles\fwith\fElectronic\fP\brking\fBr\bke\f(EPB)\fit\fis\frequired\fto\f\bctiv\bte\fthe\fservice\fmode\f
before\f\bny\fwork\fis\fst\brted.\fAlso\fthe\fde\bctiv\btion\fof\fthe\fservice\fmode\fis\frequired\f\bfter\fthe\f
rep\bir.\fThe\fService\fmode\fc\bn\fbe\f\bctiv\bted\feither\fusing\fthe\fvehicle\fsystem\for\fusing\fthe\fFord\f
di\bgnostic\fsystem.\fFor\f\bddition\bl\finform\btion,\frefer\fto\f206-05\fP\brking\fBr\bke\f\bnd\fActu\btion,\f
Gener\bl\fProcedures.\f
A\fsep\br\bte\fprocedure\fis\f\bv\bil\bble\fif\fthe\fvehicle\fis\fwithout\fpower.\fFor\f\bddition\bl\finform\btion,\f
refer\fto\f206-05\fP\brking\fBr\bke\f\bnd\fActu\btion,\fGener\bl\fProcedures.\f
Стр. 2 из 2
04.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G504930&gui...procarmanuals.com
http://vnx.su