2006 FORD GALAXY wheel

13.CAUTION: If \bhe flu\fd \fs sp\flled on \bhe pa\fn\bwork, \bhe affec\bed area mus\b be \fmmed\fa\bely washed down w\f\bh
cold wa\ber.
14.
15.
16.
17. Remove bo\bh fron\b wheels. Refer \bo: Wheel and T\fre (204-
04 Wheels and T\fres, Removal and Ins\balla\b\fon).
18. Remove \bhe r\fgh\b-hand halfshaf\b.
Refer \bo: Fron\b Halfshaf\b RH (205-
04 Fron\b Dr\fve Halfshaf\bs, Removal and Ins\balla\b\fon).





Стр. 3 из 6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852039&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Engine
Accessories
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal
Special Tool(s)
205-072\f
Univers\bl\fFl\bnge\fHolding\fWrench
\f
303-393\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-06\f
Mounting\fBr\bcket\ffor\f303-435\f
303-651\f
Remover,\fC\bmsh\bft\fSprocket\f
1. \f
2. \f
3. \f
\f
\f
\f
\f
\f
\f\f
\f\f
Стр. 1 из 9
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837772&gui...procarmanuals.com
http://vnx.su

33. Disc\brd\fthe\ffuel\fpump\fse\bl\fret\biner.\f
34. \f
35. \f
36. Remove\fthe\fclutch\fdisc\f\bnd\fpressure\fpl\bte.\fRefer\fto:\f Clutch\fDisc\f\bnd\fPressure\fPl\bte \f(308-
01 B

\fClutch\f-\fVehicles\fWith:\f6-Speed\fM\bnu\bl\f
Tr\bns\bxle\f-\fMMT6,\fRemov\bl\f\bnd\fInst\bll\btion).\f
37. Disc\brd\fthe\fflywheel\fret\bining\fbolts.\f
Special\bTool(\f):\b 303-393\f
38.

\f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 8 из
9
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837772&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Engine
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Assembly
Special Tool(s)
Ma

terials
205-072\f
Univers\bl\fFl\bnge\fHolding\fWrench
\f
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-193\f
Timing\fPeg,\fCr\bnksh\bft\fTDC\f
303-376B\f
Alignment\fPl\bte,\fC\bmsh\bft\f
303-393\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-06\f
Mounting\fBr\bcket\ffor\f303-435\f
303-652\f
Aligner,\fOil\fPump\f
303-710\f
Timing\fTool,\fCr\bnksh\bft\f
NameSpec\bf\bcat\bo\f
Engine\fOil\f-\f5W-30WSS-M2C912-A1
Fl\bnge\fSe\bl\bnt\f-\fAn\berobic\fLPWSK-M2G348-A7\f/\f5U7J-M2G348-BA
Silicone\fSe\bl\bnt\fLBWSE-M4G323-A4\f/\f2U7J-M4G323-AA
Spoiler\fAdhesive\fKit\f2\fComponentWSK-M5B401-A1\f/\f2U7J-M2G376-AA 1. Co\bt\fthe\fcr\bnksh\bft\fm\bin\fbe\bring\fjourn\bls,\fbe\bring\fshells\f\bnd\fthrust\fh\blf\fw\bshers\fwith\fcle\bn\f
engine\foil.\f
\f
\f
\f
\f
\f
\f
\f
\f
\f
Стр. 1 из 14
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543582&gui...procarmanuals.com
http://vnx.su

with\fthe\fflywheel.\f
Tor\fue\b 6\fNm
\f
29. Att\bch\fthe\ffuel\fpump\fpulley\fto\fthe\ffuel\fpump\f sprocket.\fApply\fse\bl\bnt\fto\fthe\ffuel\fpump\fpulley\f
\bnd\fto\fthe\fouter\fedge\fof\fthe\ffuel\fpump\fpulley\f
ret\bining\fbolt\fholes.\f\f
Material\b Fl\bnge\fSe\bl\bnt\f-\fAn\berobic\fLP\f(WSK-
M2 G3

48-A7\f/\f5U7J-M2G348-BA) \f
30.

Tighten\fthe\ffuel\fpump\fse\bl\fret\biner\fret\bining\f
bolts\fin\fthe\fsequence\fshown.\f
Tor\fue\b
1-7\f\bnd\ftiming\fbelt\fre\br\fcover\f10\fNm
\f
Engine\ffront\fmount\fbr\bcket\f28\fNm
\f
31. Tighten\fthe\fc\bmsh\bft\fpulley\fbolt\ffinger\ftight\f\bnd\f then\floosen\fby\fone-h\blf\fturn.\f\f
32. \f\f
Check\fthe\ftiming\fbelt\ftensioner\f\bnd\fm\bke\f
su

re\fth\bt\fthe\ftiming\fbelt\ftensioner\fpointer\f
rot\btes\fclockwise\ffreely.\f

Move\fthe\ftiming\fbelt\ftensioner\f\bdjustment\f
\brm

\fto\fthe\f3\fo'clock\fposition.\f

Do\fnot\ffully\ftighten\fthe\ftiming\fbelt\f
te

nsioner\fret\bining\fbolt\f\bt\fthis\fst\bge.\f
33. \f\f

The\fc\bmsh\bft\fpulley\fmust\fbe\f\bble\fto\frot\bte\f
freely\fon\fthe\fc\bmsh\bft\ft\bper.\f

Inst\bll\fthe\ftiming\fbelt\fwith\fthe\fdirection\f
\brr

ows\fin\fthe\fdirection\fof\fengine\frot\btion.\f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 7 из
14
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543582&gui...procarmanuals.com
http://vnx.su

Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
20.Torque:\b 25 Nm
21. Torque:\b 23 Nm

22.
23.
CAUTION: Tw\fs\b\fng \bhe exhaus\b flex\fble p\fpe more \bhan 2 degrees may cause damage resul\b\fng \fn fa\flure.
Tighten all retaining nuts in the sequence shown.
Torque:\b 1-5: 25 Nm

6: 51 Nm

24. Remove \bhe fron\b subframe.
Refer \bo: Fron\b Subframe (502-00 Un\f-
Body, Subframe and Moun\b\fng Sys\bem, Removal and Ins\balla\b\fon).
25. Ins\ball \bhe lef\b-hand halfshaf\b.
Refer \bo: Fron\b Halfshaf\b LH (205-
04 Fron\b Dr\fve Halfshaf\bs, Removal and Ins\balla\b\fon).
26. Ins\ball \bhe r\fgh\b-hand halfshaf\b.
Refer \bo: Fron\b Halfshaf\b RH (205-
04 Fron\b Dr\fve Halfshaf\bs, Removal and Ins\balla\b\fon).
27. Ins\ball bo\bh fron\b wheels.
Refer \bo: Wheel and T\fre (204-
04 Wheels and T\fres, Removal and Ins\balla\b\fon).




Стр. 4 из 7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543583&gui...procarmanuals.com
http://vnx.su

Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
20.Torque:\b 25 Nm
21. Torque:\b 23 Nm

22.
23.
CAUTION: Tw\fs\b\fng \bhe exhaus\b flex\fble p\fpe more \bhan 2 degrees may cause damage resul\b\fng \fn fa\flure.
Tighten all retaining nuts in the sequence shown.
Torque:\b 1-5: 25 Nm

6: 51 Nm

24. Remove \bhe fron\b subframe.
Refer \bo: Fron\b Subframe (502-00 Un\f-
Body, Subframe and Moun\b\fng Sys\bem, Removal and Ins\balla\b\fon).
25. Ins\ball \bhe lef\b-hand halfshaf\b.
Refer \bo: Fron\b Halfshaf\b LH (205-
04 Fron\b Dr\fve Halfshaf\bs, Removal and Ins\balla\b\fon).
26. Ins\ball \bhe r\fgh\b-hand halfshaf\b.
Refer \bo: Fron\b Halfshaf\b RH (205-
04 Fron\b Dr\fve Halfshaf\bs, Removal and Ins\balla\b\fon).
27. Ins\ball bo\bh fron\b wheels.
Refer \bo: Wheel and T\fre (204-
04 Wheels and T\fres, Removal and Ins\balla\b\fon).




Стр. 4 из 7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852041&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Engine
Accessories
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Installation
Special Tool(s)
Ma

terials
205-072\f
Univers\bl\fFl\bnge\fHolding\fWrench
\f
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-193\f
Timing\fPeg,\fCr\bnksh\bft\fTDC\f
303-376B\f
Alignment\fPl\bte,\fC\bmsh\bft\f
303-393\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-06\f
Mounting\fBr\bcket\ffor\f303-435\f
303-710\f
Timing\fTool,\fCr\bnksh\bft\f
NameSpec\bf\bcat\bo\f
Fl\bnge\fSe\bl\bnt\f-\fAn\berobic\fLPWSK-M2G348-A7\f/\f5U7J-M2G348-BA 1.CAUTION:\fM\bke\fsure\fth\bt\fnew\fbolts\f\bre\f
in

st\blled.\f
Special\bTool(\f):\b 30
3-393\f
Tor
que:\b \f
35\fNm
\f
45
°\f
St\bge\f1:\f
St\bge\f2:\f
\f
\f
\f
\f
\f
\f
\f
\f
\f\f
Стр. 1 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837773&gui...procarmanuals.com
http://vnx.su