2006 FORD GALAXY warning

20.CAUTION: Tw\fs\b\fng \bhe exhaus\b flex\fble p\fpe more \bhan 2 degrees may cause damage resul\b\fng \fn fa\flure.
21. Remove \bhe accessory dr\fve bel\b. Refer \bo: Accessory Dr\fve Bel\b (303-
05D Accessory Dr\fve
TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
22. Secure \bhe Power S\beer\fng Pump \bo one s\fde.
General \bqui\fment: Cable \b\fes
23.

Secure \bhe A/C compressor \bo one s\fde.
General \bqui\fment: Cable \b\fes
24.

D\fsconnec\b \bhe PCM elec\br\fcal connec\bors.
Refer \bo: Power\bra\fn Con\brol Module (PCM) (303-
14E Elec\bron\fc Eng\fne Con\brols
Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
25.D\fsconnec\b \bhe fuel supply l\fne and fuel re\burn l\fne qu\fck release coupl\fngs.
Refer \bo: Fuel F\fl\ber (310-01B Fuel Tank and L\fnes - 1.8L Dura\borq
(92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
26.
WARNING: Make sure \bha\b \bhe eng\fne and \bransm\fss\fon assembly \fs on wooden blocks and secured w\f\bh
su\f\bable re\ba\fn\fng s\braps.
Us\fng a su\f\bable workshop \bable.
Gen
eral \bqui\fment: Veh\fcle/axle s\bands
Ge n

eral \bqui\fment: Cable \b\fes




Стр. 4 из 6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543580&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi (74kW/\b00PS) - Lynx/\b.8L \furatorq-T\fCi
(92kW/\b25PS) - Lynx - Engine—Vehicles With: 6-
Speed Manual Transaxle
(MMT6)
Removal
General Equipment
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions.
WARNING: Make sure that the fuel pressure has dropped to zero and that the fuel temperature is at ambient temperature.
Cable ties
Vehicle/axle stands
1. Refer \bo: D\fesel Fuel Sys\bem Heal\bh and Safe\by Precau\b\fons
2.
3. Remove \bhe a\fr cleaner. Refer \bo: A\fr Cleaner (303-
12D In\bake A\fr D\fs\br\fbu\b\fon and F\fl\ber\fng
Dura\borq-TDC\f (92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
4. Remove \bhe ba\b\bery.
Refer \bo: Ba\b\bery (414-
01 Ba\b\bery, Moun\b\fng and Cables, Removal and Ins\balla\b\fon).
5.
6. Dra\fn \bhe cool\fng sys\bem.
Refer \bo:
Cool\fng Sys\bem Dra\fn\fng, F\fll\fng and Bleed\fng
Lynx/1.8L Dura\borq-TDC\f (92kW/125PS) - Lynx, General Procedures).
7.



Стр. 1 из
6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852039&gui...procarmanuals.com
http://vnx.su

27.WARNING: Make sure \bha\b \bhe eng\fne and \bransm\fss\fon assembly \fs on wooden blocks and secured w\f\bh
su\f\bable re\ba\fn\fng s\braps.
Us\fng a su\f\bable workshop \bable.
Gen
eral \bqui\fment: Veh\fcle/axle s\bands
Gen

eral \bqui\fment: Cable \b\fes
28.
29. Remove also \bhe eng\fne fron\b moun\b s\bud.
30.
Ra\fse \bhe veh\fcle and remove \bhe eng\fne and \bransaxle assembly.
31. Remove \bhe s\bar\ber mo\bor.
Refer \bo: S\bar\ber Mo\bor (303-06D S\bar\b\fng Sys\bem -
1.8L Dura\borq
(92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
32.
33.
34.





Стр. 5 из
6
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852039&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi (74kW/\b00PS) - Lynx/\b.8L \furatorq-T\fCi
(92kW/\b25PS) - Lynx - Engine—Vehicles With: 5-
Speed Manual Transaxle
(MTX-75)
Installation
General Equipment
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions.
Cable ties
Vehicle/axle stands
1. Refer \bo: D\fesel Fuel Sys\bem Heal\bh and Safe\by Precau\b\fons
2. Ins\ball \bhe \bransaxle \bo \bhe eng\fne.
3.Torque:\b 48 Nm

4. Torque:\b 48 Nm

5. Torque:\b 48 Nm

6. Torque:\b 48 Nm

7. Torque:\b 48 Nm





Стр. 1 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543583&gui...procarmanuals.com
http://vnx.su

8.Torque:\b 24 Nm
9. Torque:\b 25 Nm

10. Ins\ball \bhe s\bar\ber mo\bor. Refer \bo: S\bar\ber Mo\bor (303-06D S\bar\b\fng Sys\bem -
1.8L Dura\borq
(92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
11.
WARNING: Make sure \bha\b \bhe eng\fne and \bransm\fss\fon assembly \fs on wooden blocks and secured w\f\bh
su\f\bable re\ba\fn\fng s\braps.
Secure \bhe eng\fne and \bransaxle assembly on a su\f\bable workshop \bable and pos\f\b\fon \f\b under \bhe veh\fcle.
Genera\f\bEquipment:\b Veh\fcle/axle s\bands
Gen
era\f\bEquipment:\b Cable \b\fes
12.Loosen:\b 2 \burn(s)
13. Torque:\b 133 Nm






Стр. 2 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543583&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi (74kW/\b00PS) - Lynx/\b.8L \furatorq-T\fCi
(92kW/\b25PS) - Lynx - Engine—Vehicles With: 6-
Speed Manual Transaxle
(MMT6)
Installation
General Equipment
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions.
Cable ties
Vehicle/axle stands
1. Refer \bo: D\fesel Fuel Sys\bem Heal\bh and Safe\by Precau\b\fons
2. Ins\ball \bhe \bransaxle \bo \bhe eng\fne.
3.Torque:\b 48 Nm

4. Torque:\b 48 Nm

5. Torque:\b 48 Nm

6. Torque:\b 48 Nm

7. Torque:\b 48 Nm





Стр. 1 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852041&gui...procarmanuals.com
http://vnx.su

8.Torque:\b 24 Nm
9. Torque:\b 25 Nm

10. Ins\ball \bhe s\bar\ber mo\bor. Refer \bo: S\bar\ber Mo\bor (303-06D S\bar\b\fng Sys\bem -
1.8L Dura\borq
(92kW/125PS) - Lynx, Removal and Ins\balla\b\fon).
11.
WARNING: Make sure \bha\b \bhe eng\fne and \bransm\fss\fon assembly \fs on wooden blocks and secured w\f\bh
su\f\bable re\ba\fn\fng s\braps.
Secure \bhe eng\fne and \bransaxle assembly on a su\f\bable workshop \bable and pos\f\b\fon \f\b under \bhe veh\fcle.
Genera\f\bEquipment:\b Veh\fcle/axle s\bands
Gen
era\f\bEquipment:\b Cable \b\fes
12.Loosen:\b 2 \burn(s)
13. Torque:\b 133 Nm






Стр. 2 из
7
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G852041&gui...procarmanuals.com
http://vnx.su

Engine - Oil Leaks
NOTE:\fBefore\finst\blling\fnew\fg\bskets\for\foil\fse\bls,\fm\bke
\fsure\fth\bt\fthe\ff\bult\fis\fcle\brly\f
est\bblished.\f
If\fthe\foil\fle\bk\fc\bnnot\fbe\fidentified\fcle\brly\fby\f\b\fvisu
\bl\finspection,\fc\brry\fout\f\bn\fultr\bviolet\f
(UV)\ftest:\f
Ultraviolet (UV) Testing
1. 1.
Cle\bn\fthe\fengine\f\bnd\ftr\bnsmission\fwith\f\b\fsuit\bble\fcle\bning\ffluid.\f
2

. \b.
Pour\fthe\fUV-test\ffluid\fin\f\bccord\bnce\fwith\fthe\fqu\bntity\fspecified\fby\fthe\f
m
\bnuf\bcturer\fthrough\fthe\foil\ffiller\fneck\finto\fthe\fengine\f\bnd\finst\bll\fthe\foil\ffiller\fc\bp.\f
3. 3.
St\brt\fthe\fengine\f\bnd\flet\fit\frun\ffor\f\bbout\ffive\fminutes.\f
4

. 4.
Switch\foff\fthe\fengine.\f
N

OTE:\fIf\fno\fle\bk\fc\bn\fbe\ffound,\fro\bd\ftest\fthe\fvehicle\fu
nder\fv\brious\flo\bds\f\bnd\fcheck\fthe\f
engine\ffor\fle\bks\f\bg\bin.\f
5. 5.
Check\fthe\fengine\ffor\foil\fle\bks\fusing\f\b\fsuit\bble\fUV\fl\bmp.\f
6

. 6.
Rectify\f\bny\fle\bks\ffound\f\bnd\fcheck\fthe\fengine\ffor\foil\fle\bks.\f
M

easure the compression pressure
WARNING:\fDo\fnot\fc\brry\fout\f\bny\frep\birs\fto\fthe\ffuel\finje
ction\fsystem\fwithout\fchecking\f
th\bt\fthe\ffuel\fpressure\fh\bs\fdropped\fto\fzero\f\bnd\fth\bt\fthe\ffuel\ftemper\bture\fh\bs\feither\f
re\bched\f\bmbient\ftemper\bture\for\fis\fbelow\f30°C,\fwhichever\fis\fthe\fgre\bter.\fF\bilure\fto\ffollow\f
these\finstructions\fm\by\fresult\fin\fperson\bl\finjury.\f
NOTE:\fThe\fpowertr\bin\fcontrol\fmodule\f(PCM)\freceives\f\bn\ferror\fmess\bge\fwhen\fthe\ffuel\f
pump\frel\by\fis\fremoved\for\felectric\bl\fcomponents\f\bre\fdisconnected.\fThis\ferror\fmess\bge\f
must\fbe\fdeleted\ffrom\fthe\ff\bult\fmemory\fusing\fthe\fFord\fdi\bgnostic\fequipment\f\bfter\f
completing\fthe\fcompression\ftest.\f
NOTE:\fV\blve\fcle\br\bnce\fmust\fbe\fset\fcorrectly\fbefore\fperforming\f\b\fcompression\ftest.\fM\bke\f
sure\fthe\fengine\fis\f\bt\fthe\fnorm\bl\foper\bting\ftemper\bture.\f
Dur\btorq-TDCi\f(103kW/140PS)\f-\fDW,\f
Emission\fRequirements:\fSt\bge\fIV,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
Timing\fbelt\for\ftiming\f
ch\bin\fincorrectly\f
tensioned.\f
*CHECK\fthe\ftiming\fbelt\ftension.\fINSTALL\f\b\f
new\ftiming\fbelt\for\ftiming\fch\bin\f\bs\fnecess\bry.\f
REFER\fto:\f Timing\fBelt \f(303-01F\fEngine\f-
\f2.0L\f
Dur\btorq-TDCi\f(85kW/115PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(100kW/136PS)\f-\fDW/2.0L\f
Dur\btorq-TDCi\f(103kW/140PS)\f-\fDW,\f
Emission\fRequirements:\fSt\bge\fIV,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
*
Noisy\frunning\for\f
engine\fnoiseEngine\fcomponents\f
Pistons.\f
Piston\frings.\f
Connecting\frod\fbig\fend,\f
m\bin\fbe\bring\for\fthrust\f
be\bring\fjourn\bls.\f
Connecting\frods\fbent\for\f
d\bm\bged.\f
*
-
-
-
-CHECK\fthe\fengine\fcomponents\ffor\fwe\br\for\f
d\bm\bge.\fM\bke\fsure\f\bll\fcomponents\f\bre\fwithin\f
specific\btion.\fINSTALL\fnew\fcomponents\f\bs\f
necess\bry.\fREFER\fto:\f
Specific\btions\f(303-01F\f
Eng

ine\f-\f2.0L\fDur\btorq-TDCi\f(85kW/115PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(100kW/136PS)\f-\f
DW/2.0L\fDur\btorq-TDCi\f(103kW/140PS)\f-\f
DW,\fEmission\fRequirements:\fSt\bge\fIV,\f
Specific\btions).\f
*
Стр. 5 из
13
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G549215&gui...procarmanuals.com
http://vnx.su