2006 DODGE VIPER light

[x] Cancel search: light

Page 213 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual 2. Twist off sockets counter-clockwise and pull out bulbs
from the socket, install the new bulbs, and reinstall the
bulb and socket assembly. Replace the splash shield.
NOTE:On vehicles equipped with

Page 214 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual High Intensity Discharge Headlights (HID)
The headlights are a type of high voltage discharge tube.
High voltage can remain in the circuit even with the
headlight switch off and the key removed.Becaus

Page 218 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual License Plate Light
Twist off sockets counter-clockwise and pull out bulbs.
Replace as required.
218 MAINTAINING YOUR VEHICLE

Page 219 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual Headlight Aiming
The headlights on your new Viper were aimed at the
factory. The factory setting was made at a no load setting.
A great increase in weight will change the aiming and it
may be necessar

Page 228 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual At Each Stop for Fuel
•Check the engine oil level about 5 minutes after a fully
warmed engine is shut off. Checking the oil level while
the vehicle is on level ground will improve the accu-
racy of

Page 244 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual Customer Assistance For The Hearing Or Speech
Impaired (TDD/TTY)
To assist customers who have hearing difficulties, the
manufacturer has installed special TDD (Telecommuni-
cation Devices for the Deaf

Page 250 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual About Your Brakes....................... 125
ABS (Anti-Lock Brake) System............... 91
Accessory Delay, Power..................14,28
Adding Engine Coolant (Antifreeze).......... 192
Adding Fuel..

Page 251 of 264

DODGE VIPER 2006 ZB / 2.G Owners Manual Emergency Starting..................... 158
Gas Caution.......................... 181
Jump Starting......................... 158
Keyless Transmitter Replacement............ 20
Bearings................