2006 DODGE SPRINTER tow

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
2
CONTENTS
Q Ignition Lock / Starter Switch . . . . . . . . . . . . . . . . . 13
…Immobilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Q Central Locking (Optional) . . . . . . . . . . . . . . . . . . 15
…Unlocking: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
…Locking: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
…Central Locking Switch . . . . . . . . . . . . . . . . . . . . 17
…Locking Status Display . . . . . . . . . . . . . . . . . . . . 18
…Locking and Unlocking . . . . . . . . . . . . . . . . . . . . 19
…To Program the Automatic Lock
Feature when Starting the Engine . . . . . . . . . . . 19
Q Remote Keyless Entry (Optional) . . . . . . . . . . . . . 20
…Unlocking with Remote Keyless Entry . . . . . . . 21
…Locking with Remote Keyless Entry . . . . . . . . . 22
Q Replacing Batteries in Remote Keyless Entry . . . 22
Q Security System with Towing and Passenger
Compartment Protection (Optional) . . . . . . . . . . . 23
…Audible Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
…Visual Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
…Switching off the Alarm . . . . . . . . . . . . . . . . . . . 24
Q Towing Protection and Passenger Compartment
Protection Switch (Optional) . . . . . . . . . . . . . . . . . . 24
…Towing Protection . . . . . . . . . . . . . . . . . . . . . . . . 24
…Switching off the Towing Protection . . . . . . . . . 24
…Passenger Compartment Protection . . . . . . . . . 25
…Switching off the Passenger Compartment
Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
…Alarm Pushbutton
(Vehicles with Security Systems only) . . . . . . . 26

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
2
Replacing Batteries
Rated voltage: 6 V
DC (2x 3V)
Rated current:10 mA
1. Release the
mechanical key
by pressing the
release button.
2. Remove the
battery cover.
3. Remove the battery and install
new one (note correct polarity;
positive terminal up).
4. Press on the battery cover until it
snaps into place.SECURITY SYSTEM WITH TOWING AND
PASSENGER COMPARTMENT PROTECTION
(OPTIONAL)
The security system is ready for operation, if the
vehicle is locked with the remote keyless entry
transmitter.
If a door is open, the security system is not switched on
during the locking process.
Security system activation is indicated by the turn
signal lamps flashing three times in succession.
For a function check, when the security system is
switched on, the indicator lamps in the towing
protection/passenger compartment protection switch
flash.
The security system will switch off if the vehicle is
unlocked using the remote keyless entry transmitter.
The turn signal lamps flash once.

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
The alarm is triggered if the security system has been
activated and
 A door is opened,
 a door is unlocked from inside,
 the engine cover is opened,
 the key is used to unlock the vehicle at any door,
 the key is turned to position 2 in the ignition lock.
Audible Alarm
The horn sounds for about 25 seconds.
Visual Alarm
The turn signal lamps flash for about 4 minutes.
Switching off the Alarm
The alarm will switch off immediately if the vehicle is
unlocked using the remote keyless entry transmitter.
NOTE: Do not manually unlock the doors as this will
trigger the alarm.TOWING PROTECTION AND PASSENGER
COMPARTMENT PROTECTION SWITCH
(OPTIONAL)
See Section 4, Understanding Your Instrument Panel,
for switch locations.
Switch off the towing protection
Indicator lamp
As a function check, (1) the indicator
lamp (2) flashes when the security
system is switched on.
Switch off the passenger compartment protection (3).
Towing Protection
The towing protection is ready for operation after
30 seconds as the security system has been activated.
The alarm is triggered if the vehicle is lifted while the
security system is activated.
Switching off the Towing Protection
If the vehicle is to be transported or loaded, the towing
protection must be switched off in order to avoid a
false alarm.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
2
1. Place the key in position 0 or 1 in the ignition lock.
2. Press the switch up (1) to switch off the towing
protection.
The indicator lamp (2) is briefly illuminated.
If passenger compartment protection will be switched
off as well, wait until the indicator lamp (2) goes out,
and
3. Press switch (3) downward.
The indicator lamp (2) flashes about 10 times.
To activate the setting (towing protection/passenger
compartment protection switched off):
4. Keep the key in locking position in the driver’s
door lock for more than 2 seconds or
5. lock the vehicle using the remote keyless entry
transmitter.
The towing protection will remain switched off until
the vehicle is locked again with the remote keyless
entry transmitter.
NOTE: The alarm will switch off immediately if the
vehicle is centrally unlocked using the remote keyless
entry transmitter.Passenger Compartment Protection
The passenger compartment protection is ready for
operation 30 seconds after the security system has been
activated. The alarm is triggered if movement inside
the vehicle is registered while the security system is
activated.
NOTE: Close the side windows and the glass tilting
roof.
Do not leave any objects (mascots, hangers) on the
interior mirror or on the roof grab handles, as these
could trigger a false alarm.
Switching off the Passenger Compartment
Protection
If persons or animals remain in the locked vehicle,
switch off the passenger compartment protection to
prevent a false alarm.
1. Place the key in position 0 or 1 in the ignition lock.
2. Press the switch downward (3) to switch off the
passenger compartment protection. The indicator
lamp (2) flashes about 10 times.
If towing protection is to be switched off as well, wait
until the indicator lamp (2) goes out, and

26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Press switch up (1).
The indicator lamp (2) is briefly illuminated.
To activate the setting (passenger compartment/
towing protection switched off):
4. Lock the vehicle using the remote keyless entry
transmitter.
The passenger compartment protection will remain
switched off until the vehicle is locked again with the
remote keyless entry transmitter.
NOTE: The alarm will switch off immediately if the
vehicle is centrally unlocked using the remote keyless
entry transmitter.Alarm Pushbutton (Vehicles with Security Systems
only)
See Section 4, Understanding Your Instrument Panel,
for switch locations.
Trigger the alarm manually/lock the
vehicle.
The audible and visual alarm can be
triggered manually by using the
alarm pushbutton.
Audible Alarm
The horn sounds until the alarm is switched off.
Visual Alarm
The turn signal lamps flash until the alarm is switched
off.
Trigger the alarm manually and lock the vehicle.
Press the alarm pushbutton upward once.
The indicator lamp flashes in the towing/passenger
compartment protection switch.

UNDERSTANDING YOUR INSTRUMENT PANEL 111
4
Legend for Switch Locations
1. Fog lamp switch (Optional), refer to "Fog Lamp
Switch".
2. Headlamp range control, refer to "Headlamp
Range Control".
3. Auxiliary heat exchanger switch (Optional).
4. Heated rear window (Optional).
5. Left-hand seat heater switch (Optional).
6. Central locking switch with load compartment lock
(Optional).
7. Alarm pushbutton.
8. Deactivate Acceleration skid control (ASR) switch.9. Switch for auxiliary heater (Optional)
10. Right-hand seat heater switch (Optional),
11. Sun roof operation switch (Optional).
12. Interior cargo area lighting (Optional),
refer to "Interior Cargo Area Lighting".
13. Towing/passenger compartment protection switch
(Optional).
14. Airflow switch for the air conditioner for rear
passenger compartment (Optional).
15. Temperature control (Optional).
16. Electric blower switch (Optional).
17. Windshield heater switch (Optional).
18. Constant RPM switch (Optional).

STARTING AND OPERATING 143
5
…Winter tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Q Snow Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Q Fuel Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 209
…Fuel Filter with Water Separator . . . . . . . . . . . 210…Diesel Fuels for Use at Very
Low Temperatures . . . . . . . . . . . . . . . . . . . . . . . 211
Q Refueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
…Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Q Programmed Top Speed (Optional) . . . . . . . . . . 213
Q Bleeding Diesel Fuel System . . . . . . . . . . . . . . . . . 214
Q Draining Fuel Filter with Water Separator . . . . 214
…Bleeding the Diesel Fuel System . . . . . . . . . . . 216
Q Permissible Roof Load . . . . . . . . . . . . . . . . . . . . . . 216
Q Loading the Vehicle . . . . . . . . . . . . . . . . . . . . . . . . 216
…Tire and Loading Information . . . . . . . . . . . . . 217
Q Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
…Trailer Hitches (Optional) . . . . . . . . . . . . . . . . . 222
…Electrical Connections (Optional) . . . . . . . . . . 222
…Vehicle and Trailer Weights and Ratings . . . . 222
…Trailer Tongue Load . . . . . . . . . . . . . . . . . . . . . 223
…Loading a Trailer . . . . . . . . . . . . . . . . . . . . . . . . 223…Checking Weights of Vehicle and Trailer . . . . 224
…Attaching a Trailer . . . . . . . . . . . . . . . . . . . . . . . 224…Towing a Trailer . . . . . . . . . . . . . . . . . . . . . . . . . 225
…Parking a Trailer . . . . . . . . . . . . . . . . . . . . . . . . . 227
Q Emissions Control System
(Catalytic Converter) . . . . . . . . . . . . . . . . . . . . . . . 228
Q Inhalation of Exhaust Gas . . . . . . . . . . . . . . . . . . . 228
Q Fording (Wading Capability) . . . . . . . . . . . . . . . . 228
Q Body Builder Guideline . . . . . . . . . . . . . . . . . . . . . 229
…A Special Note Concerning
Vehicle Alteration . . . . . . . . . . . . . . . . . . . . . . . . 230

150 STARTING AND OPERATING
Gear Selector Lever Position
The current gear selector lever position (1) is indicated
in the gear range indicator display. The automatic gear
shifting process can be adapted to specific operating
conditions using the gear selector lever.vPark Position
The park position is to be used when parking the
vehicle. Engage only with the vehicle stopped.
The park position is not intended to serve as a
brake when the vehicle is parked. Rather, the
driver should always use the parking brake in
addition to placing the gear selector lever in
park position to secure the vehicle.
NOTE: With a malfunction in the vehicle’s electrical
system the gear selector lever could remain locked in
position "P". To unlock the gear selector lever
manually, refer to "Transmission Gear Selector Lever,
Manually Unlocking".
t Reverse Gear
Shift to reverse gear only with the vehicle
stopped.
s Neutral
No power is transmitted from the engine to the
drive axle. When the brakes are released, the
vehicle can be moved freely (pushed or towed).
Do not engage "N" while driving as you may
otherwise lose control of the vehicle.