2006 DODGE DAKOTA bulb

[x] Cancel search: bulb

Page 350 of 408

DODGE DAKOTA 2006 3.G Owners Manual 5. Reverse Procedure to install bulb and housing. Place 
the two raised blocks passed the body.Center High-Mounted Stoplamp And Cargo Lamp
1. Remove the two (2) screws holding the housing/lens
to the

Page 352 of 408

DODGE DAKOTA 2006 3.G Owners Manual 4. Turn desired bulb socket1�4turn and remove socket 
and bulb from housing.  5. Pull desired bulb straight from the socket.
•Outside Bulbs: Cargo Lamps
•Inside Bulb: Center High Mount Stop Lamp
R

Page 353 of 408

DODGE DAKOTA 2006 3.G Owners Manual 6. Reverse procedure for installation of bulbs and hous- 
ing.
License Lamps
1. Using a screw driver pry black rubber housing from
the bumper. 2. Rotate the socket 1/4 turn counterclockwise.
Removing

Page 354 of 408

DODGE DAKOTA 2006 3.G Owners Manual 3. Pull bulb from socket. 
4. Reverse procedure for installation.Fog Lamps
1. Disconnect connector from fog lamp by raising wire 
harness lock tab and pulling on wire harness connector. 
2. Rotate fog

Page 391 of 408

DODGE DAKOTA 2006 3.G Owners Manual Ball Joints............................. 317 
Battery  ............................... 315 
Charging  ............................ 293 
Emergency Starting  ..................... 293 
Gas Caution  ....

Page 397 of 408

DODGE DAKOTA 2006 3.G Owners Manual Interior Lights.......................... 113 
Intermittent Wipers (Delay Wipers)  ........... 119 
Introduction  ............................. 4 
Jack Operation  ....................... 284,288 
Jack
Page:   < prev 1-8 9-16 17-24