Page 342 of 408
BULB REPLACEMENT
Headlamps
Removing Attaching Screw
Removing Headlamp Assembly
342 MAINTAINING YOUR VEHICLE
Page 343 of 408
1. Open the hood.
2. Remove the 3 screws attaching the headlamp housing
to the inner panel.
3. Grasp the headlamp and pull firmly to disengage the
headlamp housing from the fender panel.
4. While firmly holding the headlamp housing in your
hands unlock and disconnect Headlamp bulb connector.
5. Twist 1/4 turn and remove headlamp bulb and socket
from housing and replace.
Removing Headlamp Assembly
MAINTAINING YOUR VEHICLE 343
7
Page 344 of 408
Removing Headlamp BulbUnlocking Connector
344 MAINTAINING YOUR VEHICLE
Page 345 of 408
Removing Headlamp from AssemblyRemoving Headlamp Bulb
MAINTAINING YOUR VEHICLE 345
7
Page 346 of 408
6. Reverse procedure to install new Headlamp bulb into
the headlamp assembly.
NOTE: These are Halogen bulbs. Take care not to touch
the bulb with your fingers. Body oils from your fingers
could cause excessive heat buildup which reduces bulb
life.
Front Park and Turn Signal Lamp.
•
Open the hood.
•Remove the (3 ) screws attaching the headlamp hous-
ing to the inner panel.
•Grasp the headlamp and pull firmly to disengage the
headlamp housing from the fender panel.
NOTE: It is not necessary to disconnect the connector to
replace this bulb. If the bulb socket needs replacement
disconnect the connector.
Disconnecting Headlamp Bulb Connector
346 MAINTAINING YOUR VEHICLE
Page 347 of 408
•Rotate bulb socket 1/4 turn and remove socket from
housing.
•Pull bulb straight from socket.
•Reverse procedure to install new turn signal bulb.
Removing Turn Signal Bulb
Disconnecting Turn Signal Connector
MAINTAINING YOUR VEHICLE 347
7
Page 348 of 408
Rear Side Marker, Taillamps/Stoplamp, and Turn
Signal Bulbs — Replacement
1. Remove the two (2) screws that pass through the bed
sheetmetal. 2. Pull the taillamp housing straight out from the body.
Removing the Two (2) Screws
Pulling Housing From Body
348 MAINTAINING YOUR VEHICLE
Page 349 of 408
3. Rotate the bulb socket from the housing. 4. Pull bulb straight out of socket.
Rotating Bulb Socket From HousingPulling Bulb From Socket
MAINTAINING YOUR VEHICLE 349
7
