2006 CHEVROLET EXPRESS PASSANGER child seat

[x] Cancel search: child seat

Page 52 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual Do not install three child restraints in the rear seat
and never install two top tethers using the same
top tether anchor.
i(Top Tether Anchor):
Seating positions with
top tether anchors.
i(Top Tether

Page 53 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual There are two top tether anchors in the second row.
To install a child restraint in the left outboard seating
position, use anchor point (A). To install a child restraint
in the right outboard seating

Page 54 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual There is a top tether anchor for the front passenger
position with a front passenger seat. The anchor is
located at the rear of the seat cushion on the right front
passenger’s seat.There are no top

Page 56 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual {CAUTION:
Children can be seriously injured or strangled
if a shoulder belt is wrapped around their neck
and the safety belt continues to tighten.
Secure any unused safety belts behind the
child restr

Page 57 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual For the center seating position, use either
anchor point (A) or (B). Never install
two top tethers using the same top tether
anchor.
2.3. Route and tighten the top tether according
to your child restr

Page 58 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual Securing a Child Restraint in a
Rear Outside Seat Position or the
Second Row Center Seat Position
If your child restraint is equipped with the LATCH
system, seeLower Anchors and Tethers for Children
(

Page 60 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual 6. If your child restraint manufacturer recommends
using a top tether and the position you are using
has a top tether anchor, attach and tighten the
top tether to the top tether anchor. Refer to the
i

Page 61 of 406

CHEVROLET EXPRESS PASSANGER 2006 1.G Owners Manual 1. Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
2. Put the child restraint on the seat.
3. Run the vehicle’s safety belt through or around the
restrain