
Cockpit
12
Instrument cluster
1Speedometer
2Indicator lamps for turn signals
3Indicator and warning lamps12
4Tachometer46
with indicator and warning lamps12
5Engine coolant temperature gauge47
6Fuel gauge46
7Button for
>Displaying the clock47
>Service interval display47
>Checking the oil level88
8Position of automatic transmission
*40
9Button for
>Resetting trip odometer46
>Setting the clock47
10Display for
>Trip odometer/Odometer46
>Clock47
>Service interval47
>Computer
*48
>Checking the oil level88
Indicator and warning lamps 
Technology that monitors itself
Indicator and warning lamps that are identified 
by 
+ are tested for proper functioning whenever 
the key is turned. They each light up once for 
different periods of time.
If a malfunction occurs in one of the monitored 
systems, the corresponding lamp does not go 
out after the engine has started, or it lights up 
again while the vehicle is in motion. You can find 
more information about each system on the 
specified pages.
Turn signal indicators42
Battery charge current 
+97
Headlamp flasher/High beams42, 56
Engine oil pressure/
Engine oil level 
+87
Antilock Brake System ABS/Driving 
stability control systems 
+49 

Adjustments
34
Damaged safety belts
If the safety belts are damaged or 
stressed in an accident: have the belt sys-
tem, including any belt tensioners, replaced and 
the belt anchors checked. Have this work done 
o nly by your BMW Center o r at a  workshop that 
works according to BMW repair procedures 
with correspondingly trained personnel. Other-
wise, it is not guaranteed that the safety devices 
will function properly.<
Mirrors 
Exterior mirrors
The passenger's mirror is more convex 
than the driver's mirror. The objects seen 
in the mirror are closer than they appear. Do not 
gauge your distance from traffic behind you on 
the basis of what you see in the mirror; other-
wise there is an increased risk of an accident.<
1Adjustments
2To switch from one mirror to the other
3To fold the mirrors in or out
*
Manual adjustment
The mirrors can also be adjusted manually: 
press on the edges of the lens.
Folding mirrors in or out*
The mirrors can be folded in or out up to a road 
speed of approx. 6 mph/10 km/h by pressing 
button3. This can be useful on narrow roads, 
for example, or to reset the mirrors to their cor-
rect positions after they were folded in.
Automatic heating*
Both exterior mirrors are automatically heated 
when the engine is running or the ignition is 
switched on.
Interior rearview mirror
Turn the knob to reduce glare from the head-
lamps of cars behind you when driving at night.
Automatically dimming mirrors, refer to 
page71.
Steering wheel
Adjustments
Never attempt to adjust the steering 
wheel while driving the vehicle. It could 
respond with unexpected movement, posing a 
potential accident hazard.<
1.Fold the lever down.
2.Move the steering wheel to the preferred 
height and angle to suit your seated posi-
tion.
3.Swing the lever back up. 

Everything under control
46
Everything under control
Odometer 
1Odometer
2Trip odometer
3Resetting trip odometer
4Outside temperature or computer dis-
plays
*
Trip odometer 
Resetting trip odometer: 
While the ignition is switched on, press button 3 
in the instrument cluster until the trip odometer 
is set to zero.
Outside temperature display, clock*
Setting the clock, refer to page48.
Outside temperature warning
If the outside temperature drops to approx. 
377/+36, the computer automatically 
switches to the outside temperature display.
A signal also sounds and the display flashes for 
a short time. There is an increased risk of black 
ice.
After an outside temperature warning has 
been issued, the computer switches back 
to its previous screen. You can have this acti-
vated/deactivated.<
Black ice can also form at temperatures 
above 377/+36. You should therefore 
drive carefully on bridges and shaded roads, for 
example, otherwise there is an increased risk of 
an accident.<
When the vehicle is parked
If you still want to view the time and odometer 
reading briefly after the ignition has been 
switched off or the key has been removed:
Press button 3 in the instrument cluster.
Tachometer 
Never allow the engine to operate with the nee-
dle in the red overspeed sector of the gauge.
To protect the engine, the fuel supply is inter-
rupted when speed reaches this sector.
Fuel gauge 
Fuel tank capacity: approx. 14.5 US gallons/
55 liters. You can find information on refueling 
on page78.
If the tilt of the vehicle varies for a longer period, 
when you are driving in mountainous areas, for 
example, the indicator may fluctuate slightly. 

Everything under control
48
Setting the clock
1.Press button 2 for several seconds until the 
hours are displayed and the colon flashes.
2.Press button1 repeatedly until the required 
hour is set.
3.Press button2 to switch to the minutes dis-
play.
4.Press button1 repeatedly until the required 
minutes are set.
5.Press button2 to confirm the time.
The set time of day is transferred to the car 
radio display or appears in the instrument clus-
ter display.
Computer* 
To view the information on the instrument clus-
ter display, press the onboard computer button 
BC in the turn signal lever.
Each time you tap the onboard computer but-
ton, the following information is shown in the 
specified order:
>Time
>Outside temperature
>Average fuel consumption
>Cruising range>Average speed
With the ignition key in position 1 or higher, the 
respective last active setting is displayed.
If you wish, you can have all the following 
information displayed in another unit of 
measure.<
Setting the time format
You can have the clock displayed in 12h or 24h 
mode:
While the time display is active, press the 
onboard computer button BC in the turn signal 
lever until the display changes.
Changing unit of measure: °F/°C
While the outside temperature display is active, 
press the onboard computer button BC in the 
turn signal lever until the display changes.
Average fuel consumption
The average fuel consumption is calculated for 
the time for which the engine has been running.
To reset the average fuel consumption display:
Press the onboard computer button BC in the 
turn signal lever for approx. 2 seconds.
Cruising range
The computer bases its calculations of the 
cruising range on the preceding driving style 
and on the amount of fuel remaining in the tank.
Be sure to refuel as soon as possible once 
your cruising range falls below 30 miles/
50 km, otherwise engine functions are not 
ensured and damage can occur.<
Average speed
The average speed is calculated for the time for 
which the engine has been running.
To reset the average speed display:
Press the onboard computer button BC in the 
turn signal lever for approx. 2 seconds. 

Reference
At a glance
Controls
Driving tips
Mobility
 97
Jacking points
The jacking points are located at the positions 
indicated in the illustration.
Vehicle battery
Maintenance
The battery is completely maintenance-free. 
This means that the original electrolyte will nor-
mally last for the service life of the battery under 
moderate climatic conditions. Your BMW Cen-
ter will be happy to advise you if you have any 
questions concerning the battery.
Indicator lamp
The indicator lamp lights up:
The battery is no longer being charged. 
The alternator drive belt is defective or 
there is a malfunction in the charging circuit of 
the alternator. Have the system checked as 
soon as possible.
If the drive belt is defective, pull over and 
switch off the engine immediately to pre-
vent overheating and serious engine damage.
If the onboard supply voltage drops to a very 
low level, increased steering effort may also be 
necessary.<
Charging the battery
Charge the battery in the vehicle only when the 
engine has been switched off. Connections, 
refer to Jump-starting on page99.
Battery disposal
After changing a battery, have the used 
battery disposed of by your BMW Center or bring it to a recycling point. Maintain the bat-
tery in an upright position for transport and stor-
age. Secure the battery against tilting when 
transporting.<
Power loss
After a temporary power loss, the functioning of 
some equipment may be limited and require ini-
tialization. Individual settings are also lost and 
must be reset:
>Seat memory
The positions must be stored again, refer to 
page32.
>Clock must be reset, refer to page47.
Fuses
Do not attempt to repair a burned fuse or 
replace it with a fuse having a different 
color or amperage rating. To do this could 
cause a fire in the vehicle as a result of circuit 
overload.<
You will find the fuses and information on their 
respective allocation behind the glove compart-
ment.
1.Open the glove compartment.
2.Press the lock on the left, arrow1.
3.Press the lock on the right, arrow2.
4.Swing the glove compartment down.
Spare fuses and plastic tweezers for grasping 
the fuses are found in the onboard tool kit; refer 
to page93.