2006 BMW 7 SERIES engine

Downloaded from www.Manualslib.com manuals search engine 25 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
8. To install the monitor
Route branches F1 and F2 through the rear
monitor trim AC and the bottom grommet AL in
the monitorAA.
Route branch F2 through the top grommet AL.
Connect branch F2 to the connection plug (1) of
the monitor AA.
Secure the monitor AA to the rear monitor
trim AC using self-tapping screws AH.
Secure the monitor AA and rear monitor trim AC
to the seat using Torx screws Z.
Connect branch G2 to branch F1.
Connect branch H2 to headphone
connector AA1 on the monitor AA.
F1
F2
AL
AA
AC


 
F2
AL
AA
1



 
AH
AC
AH
AA


 
ZZ
H2
ACAA
F1G2
AA1



 

Downloaded from www.Manualslib.com manuals search engine 26 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
8. To install the rear monitor
Secure branches G2, F1, H2 and monitor head-
phone connector AA1 using cable ties AP.
Clip front monitor trim AT to rear monitor
cover AC.
Secure the rear monitor trim AC to the front
monitor trim AT with self-tapping screws AI.
G2/F1
APAP
H2AA1



 
AI
AT
AC


 

Downloaded from www.Manualslib.com manuals search engine 27 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
9. To connect the seat
Connect the right seat to the connection wiring
harness E as follows:
-Branch E1 to branch F4
-Branch E2 to branch F3
Secure branches E1, F4, E2 and F2 with
insulating tape to prevent them coming loose.
Connect the left seat to the connection wiring
harness D as follows:
-Branch D1 to branch F4
-Branch D2 to branch F3
Secure branches D1, F4, D2 and F3 with
insulating tape to prevent them coming loose.
F3
F4
E2
E1
E

 
D1
F4
D2
F3
D


 

Downloaded from www.Manualslib.com manuals search engine 28 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
10. Concluding work and coding
Push back the lock (1) and pull out the holder (2).
Insert button cell AR into the holder (1) and push
it into the remote control AS.
Open the battery compartment cover (1).
Insert the batteries AV into the battery compart-
ment (2) as set out in the owner’s manual.
Close the battery compartment cover (1).
Switch on the headphones AQ at the switch (1).
Set the channel on the switch (2) as set out in the
owner’s manual.

  1
2
1
AS
AR




2
1
AV


 
2
1
AQ


 

Downloaded from www.Manualslib.com manuals search engine 29 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
10. Concluding work and coding
This retrofit system does not require coding.
- Connect the battery
-Conduct a brief test
-Function test
- Re-assemble the car.

Downloaded from www.Manualslib.com manuals search engine 30 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
11. Fan wiring harness circuit diagram
Legend
Cable colours
All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram.
A50Power distributor, rear rightX1856SW 32-pin plug (I6*)
A71Power moduleX2915Socket casing, 3-pin SW (I2*)
AD*Radial fanX3074Terminal R connector
X4844SW 5-pin plug (I5*)
BD*Axial fanX10597
Relay socket (I4*)
BF*RelayX13094Earth post I1*
X14322SW 4-pin plug (I3*)
I1*Cable eyelet A6
I2*Socket casing, 3-pin SW
I3*Socket casing, 4-pin SW
I4*Relay socket
I5*Socket contact
I6*Socket contact
BR Brown RT Red
BL Blue SW Black
GE Yellow VI Violet
A50
X4844
I5*
I6*
I4*
I4*




BD*AD* X14322 X2915X3074




A71
X1856
 






X10597
X10597BF*

  
 
X13094I1*I3*
I2* I2*