Page 58 of 236

Controls
 57Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Locking safety belt
1.Secure the child restraint system with the 
belt.
2.Pull out the belt webbing completely.
3.Allow the belt webbing to be pulled in and 
pull taut against the child restraint system. 
The safety belt is locked.
Unlocking safety belt
1.Open the belt buckle.
2.Remove the child restraint system.
3.Allow the belt webbing to be pulled in com-
pletely.
Coupe: child restraint system with 
tether strap
There are two additional mounting points for 
child restraint systems with a tether strap, refer 
to arrows.
Placement of tether strap
1.Fold anchor fitting into upright position.
2.Push head restraint downward.
3.Guide tether strap over head restraint and 
hook onto anchor fitting.
LATCH child-restraint fixing system
LATCH: Lower Anchor and Tethers for CHil-
dren.
To attach a LATCH child's seat, follow the 
operating and safety instructions of the 
child's seat manufacturer.<
Rear seats
The anchorage points for the LATCH child-
restraint fixing system are located underneath 
the identifying symbol. They are not visible from 
the outside.
Before attaching the LATCH child's seat, pull 
the belt away from the region of the child-
restraint fixing system. 
     
        
        Page 109 of 236

Practical interior accessories
108 Remove the flashlight from the socket when 
needed.
Be sure that the flashlight is switched off 
when it is inserted into its socket. Failure 
to comply with this precaution could lead to 
overcharging and damage.<
Center armrest
A storage compartment is located in the arm-
rest between the front seats. This compartment 
is integrated into the central locking system and 
can also be locked separately using the hotel 
function, refer to page33.
To open the cover:
Pull the left button. The cover opens and can be 
folded upward.
Depending on the version, the storage com-
partment can be equipped with a correspond-
ing cradle
* for the telephone or mobile phone.
Adjusting height
The center armrest can be set in two positions.
Pull the right button:
Move the armrest upward or downward and 
lock it in the desired position.
Storage compartments
Storage compartment behind center 
armrest
To open, raise the cover at the left or right edge. 
The compartment contains the cup holder
 and 
the lock for the hotel function, refer to page33.
Other compartments and nets
Other compartments are provided in the doors 
as well as in the front center console
*.
Ticket pockets are located in the sun visors.
Storage nets are located on the backrests of the 
front seats and in the passenger footwell
*.
To prevent the risk of injury during an 
accident, do not stow hard or sharp-
edged items in the nets.< 
     
        
        Page 111 of 236

Practical interior accessories
110
Cigarette lighter
Press in the lighter with the engine running or 
the ignition switched on.
The lighter can be removed as soon as it pops 
back out.
Hold or touch the hot cigarette lighter by 
the knob only. Holding or touching it in 
other areas could result in burns.
Always take along the remote control when you 
leave the vehicle; otherwise, children could, for 
example, use the lighter and burn themselves.<
Connecting electrical devices
Socket
With the engine running or the ignition switched 
on, the cigarette lighter socket can be used as a 
power outlet for hand flashlights, car vacuum 
cleaners, etc., with power ratings of up to 
approx. 200 W at 12 V. Avoid damaging the 
socket by inserting plugs of different shapes or 
sizes.
In front passenger footwell
Access to the socket: 
Fold open the cover.
Ski bag*
It permits safe and clean transport of up to two 
pairs of standard skies or one snowboard.
You can use the ski bag to stow skis up to 6.9 ft/
2.10 m long.
Loading
1.Press the button downward and pull the 
filler element forward.
2.Extend the ski bag between the front seats. 
The zipper gives you easy access to stowed 
items and facilitates drying of the ski bag.
3.Press the button in the luggage compart-
ment.
4.Open the loading flap and use the magnetic 
holder to secure it to the rear panel.
To stow the ski bag, perform the above steps in 
reverse order.
Make sure to load only clean skis into the ski 
bag. Wrap sharp edges so that no damage 
occurs.