
Controls
 47Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Adjustments
Sitting safely
The ideal sitting position can make a vital con-
tribution to relaxed, fatigue-free driving. In the 
interaction with the safety belts, the head 
restraints and the airbags, the seat position 
plays an important role in an accident. To 
ensure that the safety systems operate with 
optimum efficiency, we strongly urge you to fol-
low the instructions contained in the following 
section.
For additional information on transporting chil-
dren safely, refer to page56.
Airbags
Always maintain an adequate distance 
between yourself and the airbags. Always 
hold the steering wheel by its rim with hands at 
the 9 o'clock and 3 o'clock positions to mini-
mize the risk of injuries to your hands and arms 
in the event of airbag deployment.
No one and nothing is to come between the air-
bags and the seat occupant.
Do not use the cover of the front airbag on the 
front passenger side as a storage area. Make 
sure that the front passenger is sitting correctly 
and does not rest feet or legs on the instrument 
panel, otherwise leg injuries can occur if the 
knee and front airbags are triggered.
Make sure that occupants do not rest their head 
on the side or head airbag; otherwise, injuries 
can occur if the airbags are triggered.<
Even if you adhere to all the instructions, the 
occurrence of injuries resulting from contact 
with airbags cannot be entirely ruled out, 
depending on the circumstances. The ignition 
and inflation noise may provoke a mild hearing 
loss in extremely sensitive individuals. This 
effect is usually only temporary.
For airbag locations and additional information 
on airbags, refer to page90.
Head restraints
A correctly adjusted head restraint reduces the 
risk of injury to cervical vertebrae in an accident.
Adjust the head restraint so that its center 
is approx. at ear level. Otherwise there is 
increased danger of injury in the event of an 
accident.<
Head restraints, refer to page50.
Safety belt
Before every drive, make sure that safety belts
are being worn at all of the occupied seats. 
Airbags complement the safety belt as an addi-
tional safety device, but they do not represent a 
substitute.
Your vehicle has four seats that are each 
equipped with a safety belt.
Never allow more than one person to 
wear a single safety belt. Never allow 
infants or small children to ride in a passenger's 
lap.
Expectant mothers should always wear their 
safety belts, taking care to position the lap belt 
against the lower hips, where it will not exert 
pressure against the abdominal area.
Do not route the belt across your neck, or run it 
across sharp edges. Be sure that the belt does 
not become caught or jammed. Make sure that 
the safety belt is securely fastened across the 
lap and shoulders, as close to the body as pos-
sible without it being twisted or tangled. Be sure 
not to route it over solid or breakable objects; 
otherwise, the belt can slip over the hips in the 
lap area in a frontal impact and injure the abdo-
men. Avoid wearing clothing that prevents the 
belt from fitting properly and pull the shoulder 
belt upward periodically to readjust the tension 
across your lap in order to avoid a reduction in 
the retention effect of the safety belt.<
For instructions on operating safety belts, refer 
to page51. 

Adjustments
48
Seats
Note before adjusting
Never attempt to adjust your seat while 
operating the vehicle. The seat could 
respond with unexpected movement and the 
ensuing loss of vehicle control could lead to an 
accident.
On the front passenger side as well, do not tilt 
the backrest too far toward the rear. Failure to 
observe this precaution can prevent the belt 
from providing effective protection against 
injury, as the passenger could slide under the 
belt in an accident.<
Also follow the instructions regarding damage 
to the safety belt on page52.
Convertible: with the wind deflector fitted, 
do not incline the front seat backrests too 
far backward if the seat is to be moved back to 
the end position; otherwise, the wind deflector 
will be damaged.<
Seat adjustment
 To ensure that the safety systems con-
tinue to provide optimized protection, 
please follow the adjustment instructions on 
page47.<
1Inclination
2Longitudinal direction
3Height
4Backrest
5Convertible: head restraints, refer to 
page50With the sports seat
*, you can also adjust the 
thigh support manually:
Pull the lever and move the thigh support in the 
longitudinal direction.
Lumbar support* adjustment
You can also adjust the contours of the backrest 
to obtain additional support in the lumbar 
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a 
relaxed, upright sitting position.
>Increase or decrease curvature: 
Press front or rear of switch.
>Move curvature up or down: 
Press top or bottom of switch. 

Controls
 51Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Getting in back
Before starting to drive, fold backrests 
back, otherwise there is the danger of 
accident due to an unexpected movement of 
the seat.<
Coupe: releasing backrest
Pull the lever upward and fold the backrest for-
ward.
The lever is designed so that the safety belt can 
be hooked onto it. This enables you to fasten 
the safety belt more conveniently.
Convertible: releasing backrest
The belt system integrated into the seat makes 
it easier to get in back.
1.Pull lever 1 up and fold the backrest for-
ward.
2.Press and hold button 2 until the seat has 
moved into the desired position.
3.After passengers have gotten in back, fold 
the backrest back and lock it in place.
4.Press and hold button 3 until the seat has 
moved back into its previous position. If you 
release button 3 before this, the seat stops 
in its current position.You can lock the backrest in place when it 
is folded forward. This is useful, for exam-
ple, when you get into the vehicle while it is 
parked on a hill. Press the backrest until it audi-
bly locks into place. To fold it back, you do not 
have to use lever 1 to release it.<
Lock backrest warning lamp:
Lights up when the backrest is not 
locked. At the same time, an additional 
message appears on the Control Display.
Safety belts
 To ensure that the safety systems con-
tinue to provide optimized protection, 
please follow the adjustment instructions on 
page47.<
Before every drive, make sure that safety belts
are being worn at all of the occupied seats. 
Airbags complement the safety belt as an addi-
tional safety device, but they do not represent a 
substitute.
Fastening
Make sure you hear the latch plate engage in 
the belt buckle. 

Adjustments
52
Releasing
1.Hold the belt firmly.
2.Press the red button in the belt buckle.
3.Guide the belt into its reel.
The shoulder strap's anchorage point will be in 
the correct position for adults of every build if 
the seat is correctly adjusted, refer to page48.
Safety belt reminder for driver's seat 
and passenger seat*
The indicator lamp lights up and a sig-
nal sounds. At the same time, an addi-
tional message appears on the Control 
Display. Please check whether safety belts are 
being worn correctly.
The safety belt reminder is operative at speeds 
above approx. 5 mph/8 km/h. It can also be acti-
vated if objects are placed onto the passenger 
seat.
Damage to safety belts
In case of strain due to an accident or 
damage, replace the belt system includ-
ing the safety belt tensioners and have the belt 
anchor points checked. Have this work carried 
out only by a BMW center or a workshop that 
works according to BMW repair procedures 
with appropriately trained personnel. Otherwise 
correct operation of this safety equipment is not 
guaranteed.<
Heated seats
The temperature setting advances one step in 
its control sequence each time you press the button. The maximum preselected temperature 
is supplied when three LEDs are lit.
To switch off:
Press the button longer.
Mirrors
Exterior mirrors
The mirror on the passenger's side is 
more curved than the driver's mirror. 
Objects reflected in the mirror are closer than 
they appear. Do not estimate the distance of 
following traffic based what you see in the mir-
rors; otherwise, there is an increased accident 
risk.<
1Adjustments
2Switching to the other mirror or to the auto-
matic parking function, refer to Tilting down 
passenger-side mirror on page53
Storing the mirror positions, refer to Seat, mir-
ror and steering wheel memory on page49.
Adjusting manually
You can also adjust the mirrors manually by 
pressing against the outer edges of their mirror 
glass.
Folding exterior mirrors in and out
To prevent the exterior mirrors from being 
damaged due to the width of the vehicle, 
always fold them in by hand before entering an 
automatic car wash.< 

Transporting children safely
56
Transporting children safely
The right place for children
Do not leave children unattended in the 
vehicle; otherwise, they could endanger 
themselves and other persons, e.g. by opening 
the doors.<
In principle, all seats in your BMW are suitable, 
with the exception of the driver's seat, for 
mounting universal child restraint systems for 
all age classes approved for the respective age 
group.
Children always in back
Accident research shows that the safest place 
for children is in the back.
Children younger than 13 years of age or 
under 5 ft/150 cm in height must be trans-
ported in back, seated in child restraint systems 
which correspond to the age, weight and height 
of the child. Otherwise there is an increased 
danger of injury in an accident.<
Children 13 years of age or older must wear a 
safety belt as soon as a suitable child restraint 
system can no longer be used due to their age, 
size and weight.
All rear seat positions in your vehicle comply 
with the recommendations of the standard 
SAE J1819 for the safe securing of child 
restraint systems in motor vehicles.
Exception for front passenger seat
Should it be necessary to use a child-
restraint system on the front passenger 
seat, the front, knee and side airbag on the pas-
senger side must be deactivated. Otherwise, 
there is an increased risk of injury for the child 
if the airbags are triggered, even with a child-
restraint system. Your BMW center will be glad 
to advise you.<
For more information on automatic deactivation 
of the front passenger airbags, refer to page91.
Installing child-restraint 
systems
Follow child-restraint system manufac-
turer's instructions for the selection, 
installation and use of child restraint systems. 
Otherwise the degree of protection they offer 
may be reduced.<
Commercially available child restraint systems 
are designed to be secured with a lap belt or 
with the lap belt section of a three-point belt. 
Incorrectly or improperly installed child restraint 
systems can increase the risk of injury for chil-
dren. Always follow the instructions for install-
ing the system exactly.
On front passenger seat
Before installing a child restraint system 
in the front passenger seat, make sure 
that the front, knee and side airbag on the front 
passenger side are deactivated. Otherwise 
there is an increased risk of injury if the airbags 
are triggered.<
Seat height
Before mounting a universal child-restraint sys-
tem, move the front passenger seat into the 
highest position to achieve the best possible 
belt routing. Do not change this seat height.
Child seat security
All rear safety belts and the safety belt for the 
front passenger can be locked against pulling 
out to secure child restraint systems. 

Controls
 57Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Locking safety belt
1.Secure the child restraint system with the 
belt.
2.Pull out the belt webbing completely.
3.Allow the belt webbing to be pulled in and 
pull taut against the child restraint system. 
The safety belt is locked.
Unlocking safety belt
1.Open the belt buckle.
2.Remove the child restraint system.
3.Allow the belt webbing to be pulled in com-
pletely.
Coupe: child restraint system with 
tether strap
There are two additional mounting points for 
child restraint systems with a tether strap, refer 
to arrows.
Placement of tether strap
1.Fold anchor fitting into upright position.
2.Push head restraint downward.
3.Guide tether strap over head restraint and 
hook onto anchor fitting.
LATCH child-restraint fixing system
LATCH: Lower Anchor and Tethers for CHil-
dren.
To attach a LATCH child's seat, follow the 
operating and safety instructions of the 
child's seat manufacturer.<
Rear seats
The anchorage points for the LATCH child-
restraint fixing system are located underneath 
the identifying symbol. They are not visible from 
the outside.
Before attaching the LATCH child's seat, pull 
the belt away from the region of the child-
restraint fixing system. 

Controls
 91Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Protective action
 To ensure that the safety systems con-
tinue to provide optimized protection, 
please follow the adjustment instructions on 
page47.<
The front airbags help protect the driver and 
front passenger by responding to frontal 
impacts in which safety belts alone cannot pro-
vide adequate restraint. When needed, the 
head and side airbags help provide protection in 
the event of a side impact. The relevant side air-
bag supports the side upper body area. The 
head airbag supports the head. The knee airbag 
protects the legs from colliding with the cockpit.
The airbags are deliberately not triggered in 
every impact situation, e. g. less severe acci-
dents or rear-end collisions.
For details on the correct seat position, refer to 
page47.
Do not apply adhesive materials to the 
cover panels of the airbags, cover them or 
modify them in any other way.
Do not attempt to remove the airbag retention 
system from the vehicle. Do not modify or 
tamper with either the wiring or the individual 
components in the airbag system.This category 
includes the upholstery in the center of the 
steering wheel, on the instrument panel, the 
side trim panels on the doors and on the Coupe, 
the roof pillars along with the sides of the head-
liner. Do not attempt to remove or dismantle the 
steering wheel.
Do not touch the individual components 
directly after the system has been triggered, 
because there is a danger of burns.
In the event of malfunctions, deactivation, or 
triggering of the airbag restraint system, have 
the testing, repair, removal, and disposal of air-
bag generators carried out only by a BMW cen-
ter or a workshop that works according to BMW 
repair procedures with appropriately trained 
personnel and has the required explosives 
licenses. Unprofessional attempts to service 
the system could lead to failure in an emer-
gency or undesired airbag activation, either of 
which could result in personal injury.
Automatic deactivation of front 
passenger airbags
The occupation of the seat is detected by eval-
uating the impression on the occupied seat sur-
face of the front passenger seat. The system 
correspondingly activates or deactivates the 
front, knee and side airbag on the front passen-
ger side.
The current status of the front passenger 
airbag, i.e. deactivated or activated, is 
indicated by the indicator lamp over the interior 
rearview mirror, refer to Operating state of front 
passenger airbags below.<
Before transporting a child in the front 
passenger seat, read the safety informa-
tion and follow the instructions under Trans-
porting children safely, refer to page56.
The front, knee and side airbag on the front pas-
senger side can be deactivated for teenagers 
and adults in certain seat positions; the indica-
tor lamp for the front passenger airbags lights 
up when this occurs. In these cases, change the 
seat position so that the front passenger air-
bags are activated and the indicator lamp goes 
out. If the desired status cannot be produced by 
changing the seat position, transport the corre-
sponding person in the rear seat. 
Do not fit seat covers, seat cushion padding, 
beaded mats or other items onto the front pas-
senger seat unless they are specifically recom-
mended by BMW. Do not place objects under 
the seat which could press against the seat 
from below. Otherwise a correct evaluation of 
the occupied seat surface cannot be ensured.< 

Technology for comfort, convenience and safety
92
Operating state of front passenger 
airbags
The illustration here shows a possible arrange-
ment in the Coupe. With some vehicle equip-
ment packages or in the Convertible, the 
arrangement of the switches and indicator 
lamps may differ somewhat.
The indicator lamp for the front passenger air-
bags indicates the operating status of the front, 
knee and side airbag on the front passenger 
side depending on whether the seat is occu-
pied. The indicator lamp shows whether the 
front passenger airbags are activated or deacti-
vated.
>The indicator lamp lights up when a child in 
a child restraint system intended for the 
purpose is properly detected on the seat.
The front, knee and side airbag on the front 
passenger side are deactivated.
>The indicator lamp does not light up when, 
for example, a correctly seated person of 
sufficient height is detected on the seat. 
The front, knee and side airbag on the front 
passenger side are activated.
>The indicator lamp does not light up when 
the seat is empty.
But the front, knee and side airbag on the 
front passenger side are still deactivated.
Operational readiness of airbag system
With the ignition lock at radio readiness or 
higher, refer to page58, the warning lamp lights 
up briefly, indicating the operational readiness 
of the entire airbag system and the safety belt 
tensioners.
Airbag system malfunction
>Warning lamp does not light up as of radio 
readiness.
>Warning lamp lights up continuously.
Have the airbag system checked immedi-
ately in case of a malfunction; otherwise, 
there is a danger that the airbag system may not 
respond in the expected manner in an accident 
despite an impact of corresponding intensity.<
Convertible: rollover 
protection system
The rollover protection system is automatically 
activated in the event of an accident or a critical 
driving situation, extreme inclination on the lon-
gitudinal or transverse axis, or loss of ground 
contact. The rollover bars located behind the 
rear head restraints are deployed within frac-
tions of a second.
As a supplement to the rollover bar integrated 
into the windshield frame, the rollover protec-
tion system ensures that all vehicle occupants 
have the necessary headroom.
Always keep the path of movement of the 
rollover protection system clear.
In less severe accidents, you are protected by 
the fastened safety belt and, depending on the 
severity of the accident, the belt tensioner and 
the multistage airbag restraint system.<