µµÎ
Î
Î
Î
Specif ications
270
Dimensions
Weights
Capacities Capacities
Air Conditioning 186.2 in (4,730 mm)
72.2 in (1,835 mm)
56.7 in (1,441 mm)
107.9 in (2,740 mm)
62.1 in (1,577 mm)
62.0 in (1,576 mm)
HFC-134a (R-134a)
17.6 19.4 oz (500 550 g) ND-OIL8
2.6 US qt (2.5
)
7.6 US qt (7.2
)
3.1 US qt (2.9)
5.3 US qt (5.0)
4.2 US qt (4.0
)
4.5 US qt (4.3
)
0.16 US gal (0.6
)
2.3 US qt (2.2
)
2.6 US qt (2.5)
4.8 US qt (4.5
)
2.14 US gal (8.1
)
2.09 US gal (7.9)
1.66 US gal (6.3
)
1.69 US gal (6.4)
Length
Width
Height
Wheelbase
Track
Gross vehicle weight rating
Fuel tank Engine
coolant
Engine oil
Automatic
transmission
fluid
Manual
transmission
fluid
Windshield
washer
reservoir
Refrigerant type
Charge quantity
Lubricant type
See the certification label attached
to the driver’s doorjamb.
Excluding the oil remaining in the engine Including the coolant in the reserve tank and that remaining in the
engine
Reserve tank capacity:
Approx.
Front
Rear
1:
2:Change
Manual
Automatic
Total Manual
Automatic
Change Including
filter
Without
filter
Total
Change
Total
Change
Total
U.S. Vehicle
Canada Vehicle
1
2
17.1 US gal (64.7)
Service Inf ormation Summary
Gasoline:
Fuel Tank Capacity:
Recommended Engine Oil:
Automatic Transmission Fluid:Tire Pressure (measured cold):
SpareTirePressure:
Power Steering Fluid:
Brake Fluid: Manual Transmission Fluid:
4.5 US qt (4.3
)
Premium unleaded gasoline,
pump octane number of 91 or
higher.
API Service SJ ‘‘Energy
Conserving’’ oil, SAE 5W-20
viscosity (see page ).
Oil change capacity (including
filter):
Honda ATF-Z1 (Automatic
Transmission Fluid) preferred, or
aDEXRON
III ATF as a
temporary replacement (see page ). Manual Transmission Models
Front:
35 psi (240 kPa , 2.4 kgf/cm
)
Rear:
Automatic Transmission Models Front:
Rear:
60 psi (420 kPa , 4.2 kgf/cm
)
32 psi (220 kPa , 2.2 kgf/cm
)
Honda Manual Transmission
Fluid preferred, or an SAE 10W-30
or 10W-40 motor oil as a
temporary replacement (see page
).
Capacity:
2.6 US qt (2.5
)
Honda Power Steering Fluid
preferred, or another brand of
power steering fluid as a
temporary replacement. Do not
use ATF (see page ).
Honda Heavy Duty Brake Fluid
DOT 3 preferred, or a DOT 3 or
DOT 4 brake fluid as a temporary
replacement (see page ). 32 psi (220 kPa , 2.2 kgf/cm
)
33 psi (230 kPa , 2.3 kgf/cm
)
218
223 224
226225
17.1 US gal (64.7)
