µµ
µ
µ
µ µ
µ
The OnStar advisor can
give you inf ormation on nearby
hotels, restaurants, ATMs, hospitals,
gas stations, and many other
services in any area you are traveling
in. The advisor can also help you
with hotel or restaurant reservations. If you need a ride
(taxi, limousine service, etc.) the
OnStar advisor can make the
arrangements f or you. Use the
OnStar button, or call
(888) 4-ONSTAR. The OnStar
advisor can give you verbal
directions f rom your current location
to a desired destination. The Directions and Connections
Plan provides these additional
f eatures.
By sending a signal to your
vehicle, the advisor can lock or
unlock your vehicle’s doors. This is
helpfulif youareawayfromyour
vehicle and realize you f orgot to lock
the doors, or if you have locked the
keys in your vehicle. To get OnStar’s
assistance, call (888) 4-ONSTAR
(466-7827).
Using
GPS, OnStar can locate your vehicle
almost anywhere. If your vehicle is
ever stolen, contact OnStar at
(888) 4-ONSTAR. The advisor will
put you in contact with the proper
authorities, and assist them with
locating your vehicle. If you are unable to locate your
vehicleinalargeparkinglotor
parking structure, contact OnStar at
(888) 4-ONSTAR. The advisor will
remotely activate the exterior lights
and the horn, allowing you to locate
your vehicle.
From your computer, you can log
into www. myonstar.com to make
dinner reservations, purchase tickets
to events, send f lowers, etc.
Inf ormation and Convenience
Services Ride Assist Route Support Directions and Connections Plan
Features
Remote Door L ocking/Unlocking
Stolen Vehicle T racking Misplaced Vehicle Assistance
Online Concierge Services
OnStar
Features
179
µµ
µ µµ
If the system has difficulty
understanding a voice command, it
canrespondwith:
‘‘Pardon’’ The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’ The system
missed the command because it was
not ready for it, or there was too
much background noise. Repeat the
command after a short pause.
You
cansenddialtonesduringOnStar
Personal Calling. While in a personal call, press the
Voice Activated Key-Pad Button.
OnStar will respond with ‘‘First
digit to send please.’’
Say the f irst digit of the number
you want to send.
OnStar will repeat that digit.
Always wait f or OnStar to conf irm the digit bef ore going to the next
digit.
OnStar will repeat that digit.
Say the second digit of the number.
Continue this until you have given
OnStar the complete number.
Then say ‘‘Send.’’ OnStar will send
the number by dial tones.
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the white phone button to
answer the call. When you have
completed the call, press the white
phone button again to hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a name tag. When you want
to place a telephone call, you can
recall the number by giving the system the name tag.
To store a
telephone number and its name tag
in the system:
Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Store.’’
OnStar will respond with ‘‘Phone
number to store, please.’’
Say the entire number.
OnStar will repeat the number,
andthensay‘‘YesorNo.’’
Say ‘‘Yes,’’ or say ‘‘No’’ to try again.
OnStar will respond with ‘‘Name
tag, please.’’
Say the name that you want
assigned to that telephone number.
Voice A ctivated K ey-Pad Incoming Telephone Calls
Using Name TagsStoring a Name T ag
OnStar
182
µ
»¼
»¼
µ
»¼
»¼
»¼ To delete a
name tag and telephone number
f rom memory:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Delete.’’
OnStar will respond with ‘‘Name
tag, please.’’
Say the name tag f or the number
you want to delete.
OnStar will respond with ‘‘Deletename tag , yes or no.’’
Say ‘‘Yes.’’
OnStar will respond with ‘‘Deleting name tag .’’
To
place a telephone call using a name
tag:
You can also store a telephone
number and its name tag one digit at
a time. To store them in the system:
Press the VOICE ACTIVATED
KEYPAD button.
OnStar will respond with ‘‘Name
tag, please.’’ Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Store’’ again. Say the second digit of the number. OnStar will repeat that digit.
Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to store, please.’’ Say ‘‘Digit store.’’
OnStar will respond with ‘‘OnStar
ready.’’ Press the CALL ANSWER/CALL
END button.
If you have forgotten what name
tags you have stored, the system will
read them to you. Press the CALL
ANSWER/CALL END button. When
the system responds with ‘‘Ready,’’
say ‘‘Directory.’’ OnStar will respond with ‘‘Calling
name tag ,’’ then place the
telephone call. Say the name tag f or the number
you want to call. OnStar will respond with ‘‘Name
tag, please.’’ Say ‘‘Call.’’ OnStar will respond with ‘‘Ready.’’ Press the CALL ANSWER/CALL
END button.
Say ‘‘Yes.’’ Say ‘‘New name tag.’’
OnStar will respond with ‘‘Store new name tag , Yes or No.’’
OnStar will respond with ‘‘Storing new name tag .’’
CONT INUED
Deleting a Name tag
Placing a Telephone Call
OnStar
Features
183
Apply the parking brake.
In cold weather, turn of f all
electrical accessories to reduce
the drain on the battery.
Make sure the shif t lever is in
Park. Press on the brake pedal.Without touching the accelerator
pedal, turn the ignition key to the
START (III) position. Do not hold
the key in the START (III)
position f or more than 15 seconds
at a time. If the engine does not
start right away, pause for at least
10 seconds bef ore trying again.If the engine does not start within
15 seconds, or starts but stalls
right away, repeat step 4 with the
accelerator pedal pressed halfway
down. If the engine starts, release
pressure on the accelerator pedal
so the engine does not race.
If the engine fails to start, press
the accelerator pedal all the way
down, and hold it there while
starting to clear flooding. If the
engine still does not start, return
to step 5.
5.
6.
1.
2.
3.
4.
Starting the Engine
Driving
201
T he immobilizer system protects your
vehicle f rom thef t. If an improperly-
coded key (or other device) is used, the
engine’s f uel system is disabled. For
more inf ormation, see page .
The engine is harder to start in cold
weather. Also, the thinner air f ound at
altitudes above 8,000 f eet (2,400
meters) adds to this problem.
80
µµµµµ µ
CONT INUED
This position mechani-
cally locks the transmission. Use
Park whenever you are turning of f or
starting the engine. To shif t out of
Park, you must press on the brake
pedal and have your f oot of f the
accelerator pedal.
If you have done all of the above and
still cannot move the lever out of
Park, see on
page .
To avoid transmission damage, come
to a complete stop bef ore shif ting
into Park. The shif t lever must be in
Park bef ore you can remove the key
from the ignition switch. Press the brake
pedal, making sure to keep your f oot
of f the accelerator pedal, then shif t
f rom Park to Reverse. To shif t f rom
Neutral to Reverse, come to a
completestopandthenshift. Use Neutral if you
need to restart a stalled engine, or if
it is necessary to stop brief ly with
the engine idling. Shif t to the Park
position if you need to leave your
vehicle for any reason. Press the
brake pedal, making sure to keep
your f oot of f the accelerator pedal,
when you are moving the shif t lever
f rom Neutral to another gear.
Your vehicle has a reverse lockout so
you cannot accidentally shif t to
Reverse from Neutral or any other
driving position when the vehicle
speed exceeds 7 9 mph (12 14
km/h).
If you cannot shif t to Reverse when
the vehicle is stopped, press the
brake pedal and slowly shift to
Neutral, and then to Reverse.
If there is a problem in the reverse
lockout system, or your vehicle’s
battery is disconnected or goes dead,
you cannot shif t to reverse. (Ref er to
on page ). Use this position f or
normal driving. The transmission
automatically selects a suitable gear
f or your speed and acceleration. You
may notice the transmission shif ting
up at higher speeds when the engine
is cold. This helps the engine warm
up f aster.
205
205
Automatic Transmission
Park (P)Shif t L ock Release Reverse (R)
Neutral (N)
Shif t L ock Release Drive (D )
5Driving
203
Set the parking brake.
Make sure the ignition switch is in
the LOCK (0) position.
To release the Reverse Lockout,
make sure the ignition switch is in
the ACCESSORY (I) position. Put a cloth on the edge of the Shif tLock Release slot cover. Using a
key, caref ully pry on the edge of
the cover to remove it.
Insert the key in the shift lock
release slot.
Push down on the key and move
the shift lever out of Park to
Neutral.To release the reverse lockout,
move the shift lever from neutral
to reverse, then to Park.
Do this if pushing on the brake pedal
does not shif t the transmission out of
Park. This procedure is also used to
release the Reverse Lockout.
Remove the key from the Shift
Lock Release slot. Press the brake
pedal and restart the engine.
If you need to use the shif t lock
release, it means your vehicle is
developing a problem. Have it
checked by your dealer.
1.
2.
3.
4.
5.6.
Automatic Transmission
Shif t L ock Release
Driving
205
SHIFT LOCK RELEASE SLOT
COVER
Diagnosing why the engine won’t
start f alls into two areas, depending
on what you hear when you turn the
ignition switch to the START (III)
position:You hear nothing, or almost
nothing. The engine’s starter
motor does not operate at all, or
operates very slowly.
You can hear the starter motor
operating normally, or the starter
motor sounds like it is spinning
f aster than normal, but the engine
does not start up and run.
When you turn the ignition switch to
the START (III) position, you do not
hear the normal noise of the engine
trying to start. You may hear a
clicking sound or series of clicks, or
nothing at all. Check the transmission interlock.
The transmission must be in Park
or neutral or the starter will not
operate.
Turn the ignition switch to the ON
(II) position. Turn on the
headlights, and check their
brightness. If the headlights are
very dim or do not come on at all,
the battery is discharged. See
on page . If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is dis-
charged or the connections are
corroded. Check the condition of
the battery and terminal connec-
tions (see page ). You can
then try jump starting the vehicle
f rom a booster battery (see page
).
In this case, the starter motor’s
speed sounds normal, or even f aster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run. Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the dash panel to blink
rapidly(seepage ).
Check these things: Turn the ignition switch to the
START (III) position. If the
headlights do not dim, check the
condition of the f uses. If the f uses
areOK,thereisprobably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualif ied technician to
determine the problem (see
on page ). 80
268
257
268
275
CONT INUED
If Your Engine Won’t Start
Nothing Happens or the Starter
Motor Operates Very Slowly Jump Starting
T he Starter Operates Normally
Emergency T owing
T aking Care of t he Unexpect ed
267
CONT INUED
...
Accessories and Modif ications . 193
ACCESSORY (Ignition Key .......................................
Position) .81
............
Accessory Power Sockets . 104
....................
Additives, Engine Oil . 238
.............................
Airbag (SRS) .11, 24
..............
Air Conditioning System . 106
.....................
Rear A/C Control .111
.........................................
Usage .107
.......................
Air Outlets (Vents) .108
.......................
Air Pressure, Tires .252
......................................
Antif reeze .240
Anti-lock Brakes (ABS) ....................
Indicator Light .61, 211
...................................
Operation .211
..............
Anti-thef t, Audio System . 131
.
Anti-thef t Steering Column Lock . 81
................
Audio System . 112,118,123
...
Automatic Seat Belt Tensioners . 22
.........................
Automatic Lighting .75
.............
Automatic Speed Control . 146
..............
Automatic Transmission . 202
..........................
Capacity, Fluid .284
...............
Checking Fluid Level . 242.......................................
Shif ting .202
.
Shif t Lever Position Indicator . 202
................
Shif t Lever Positions . 202
....................
Shif t Lock Release . 205
...........................
Automatic Wipers .72
Battery Charging System ...........................
Indicator .60, 272
............................
Jump Starting .268
..............................
Maintenance .257
............................
Specif ications .285
..............................
Bef ore Driving .187
..................................
Belts, Seat .10, 21
.........................
Beverage Holders .102
..................................
Booster Seats .51
Brakes ...........
Anti-lock System (ABS) . 211
.............
Break-in, New Linings . 188
...........................................
Fluid .243
....................
Bulb Replacement .247
.........................................
Parking .94
.................
System Indicator . 61,274
........................
Wear Indicators .210 .............................
Braking System .210
.................
Break-in, New Vehicle . 188
..
Brightness Control, Instruments . 76
........................
Brights, Headlights .74
Bulb Replacement ..........................
Back-up Lights .247
..............................
Brake Lights .247
................
Front Parking Lights . 246
........
Front Side Marker Lights . 246
.................................
Headlights .245
.........
High-mount Brake Light . 248
.................................
Rear Bulbs .247
............................
Specif ications .285
....................
Turn Signal Lights . 246
..............................
Bulbs, Halogen .245
Index
A
B
INDEX
I