2006 ACURA CSX high beam

System MenuData List Data List Indication
22-91
SecurityIgnition Key Cylinder Switch OFF/ON
Driver’s Door Switch OFF/ON
Front Passenger’s Door Switch OFF/ON
Driver’s Rear Door Switch OFF/ON
Passenger’s Rear Door Switch OFF/ON
Trunk Lid/Tailgate Switch OFF/ON
Front Passenger’s Door Lock Sw. (LOCK) OFF/ON
Front Passenger’s Door Lock Sw. (UNLOCK) OFF/ON
Front Passenger’s Door Lock Knob Sw. (UNLOCK) OFF/ON
Driver’s Rear Door Lock Knob Switch (UNLOCK) OFF/ON
Passenger’s Rear Door Lock Knob Sw. (UNLOCK) OFF/ON
Trunk Key Cylinder (UNLOCK) OFF/ON
Radio Switch OFF/ON
Hazard Switch OFF/ON
Hood Switch OFF/ON
Driver’s Door Key Cylinder Switch (LOCK) OFF/ON
Driver’s Door Key Cylinder Switch (UNLOCK) OFF/ON
Driver’s Door Look Switch (LOCK) OFF/ON
Driver’s Door Look Switch (UNLOCK) OFF/ON
Driver’s Door Look Knob Switch (LOCK) OFF/ON
Driver’s Door Look Knob Switch (UNLOCK) OFF/ON
Door LOCK Command OFF/ON
Door UNLOCK Command OFF/ON
Driver’s Door UNLOCK Command OFF/ON
Security Hazard Signal Command OFF/ON
Headlight Command OFF/ON
Headlight High Beam Command OFF/ON
Parking Light Command OFF/ON
(cont’d)
08/08/21 14:24:58 61SNR030_220_0093
ProCarManuals.com
DYNOMITE -2009-

•••
Function Test:
System Menu Data List Indication Data List and Operation Time
22-92Multiplex Integrated Control System
System Description (cont’d)
Door Locks
LOCK all doors Outputs LOCK signal 1 time (0.6 sec) to all doors
UNLOCK driver’s side door Outputs UNLOCK signal 1 time (0.6 sec) to driver’s
door
UNLOCK all doors Outputs UNLOCK signal 1 time (0.6 sec) to all doors
Lighting Interior Light Command Illuminates for 30 seconds.
LEFT Turn Signal Command Blinks for 5 seconds.
RIGHT Turn Signal Command Blinks for 5 seconds.
Hazard flasher Blinks turn signal (left and right) for 15 seconds.
Headlight Command Operates headlight (low) for 15 seconds.
Headlight HIGH Beam Command Operates headlight (high) for 15 seconds.
Fog Light Operates fog light relay for 15 seconds.
Parking Light Command Operates small lights for 15 seconds.
Keyless Trunk Lid/Tailgate Release Command Unlock trunk
Security Horn Command Operates horn for 1 second.
Wipers Windshield Wiper Motor LOW Command Operates windshield wiper motor for 5 seconds (low
speed).
Windshield Wiper Motor HIGH Command Operates windshield wiper motor for 5 seconds (high
speed).
Windshield Washer Command Operates windshield washer motor for 5 seconds.
Gauges Self Diagnostic Test
08/08/21 14:24:58 61SNR030_220_0094
ProCarManuals.com
DYNOMITE -2009-

Î
Î
22-149
HIGH MOUNT BRAKE LIGHT
(TYPE S model)
HIGH BEAM INDICATOR
LIGHTS-ON INDICATOR
COMBINATION LIGHT SWITCH
BRAKE PEDAL POSITION SWITCH
FOG LIGHT INDICATOR
(TYPE S and ’08 PREMIUM and ’09 models)
DRL INDICATOR Replacement, page 22-181
Test/Replacement, page 22-166
Test, page 22-181
Adjustment, page 19-6
08/08/21 14:26:52 61SNR030_220_0151
ProCarManuals.com
DYNOMITE -2009-

Î
22-151
1
BLK
G301 2
RED
RED RED RED
2 1
G201 BLK 1
2
2
4
G701
G701 MICU
9
1
2
RED RED
BLK BLK S1
ORN
BLK BLK BLK
BLK
BLK
BLK
BLK RED
RED
RED
RED S5
S11
S13
S12
S16
BLK
PNK
GRY
RED
LT BLU
G701
E19
RED
F3
RED
G201 RED
G301 BLK
G701
G701 G701
1
2
1
24
2 2
12
1 1
2
RED
G5
12
(
()
1011
6
4
)
OFF
LO
HI
DIMMER PASSING
COMBINATION LIGHT SWITCH :CANline
UNDER-DASH FUSE/RELAY BOX
LEFT
FRONT
SIDE
MAKER
LIGHT
(2 CP) RIGHT
FRONT
SIDE
MARKER
LIGHT
(2 CP) LEFT
TAILLIGHT
(5 W)
RIGHT
TAILLIGHT
(5 W)LEFT
REAR
SIDE
MARKER
LIGHT
(3 CP)RIGHT
REAR
SIDE
MARKER
LIGHT
(3 CP) RIGHT
INNER
TAILLIGHT
(5 W)
LEFT
INNER
TAILLIGHT
(5 W) LICENSE
PLATE
LIGHTS
(5 Wx2)
RIGHT
FRONT
PARKING
LIGHT
(3 CP)
LEFT
FRONT
PARKING
LIGHT
(3 CP)
*1: HIGH BEAM INDICATOR (LED)
*2: LIGHTS-ON INDICATOR (LED)
*3: DRL INDICATOR (LED)
No. 15
(7.5 A)
No. 19
(15 A)
08/08/21 14:26:53 61SNR030_220_0153
ProCarManuals.com
DYNOMITE -2009-

Î
22-153
1
BLK
G301 2
RED
RED REDRED
2 1
G201 BLK 1
2
2
4
G701
G701 MICU
9
1
2
RED
RED
BLK BLK S1
ORN
BLK BLK
BLK
BLK
BLK
BLK
BLK RED
RED
RED
RED S5
S11
S13
S12
S16
BLK
PNK
GRY
RED
LT BLU
G701
E19
RED
F3
RED
G201 RED
G301 BLK
G701
G701 G701
1
2
4
2 2
12
11
2
RED
G5
12
(
()
1011
6
4
)
OFF
LO
HI
DIMMER PASSING
COMBINATION LIGHT SWITCH
RIGHT
FRONT
SIDE
MARKER
LIGHT
(2 CP) LEFT
TAILLIGHT
(5 W)
RIGHT
TAILLIGHT
(5 W)LEFT
REAR
SIDE
MARKER
LIGHT
(3 CP)RIGHT
REAR
SIDE
MARKER
LIGHT
(3 CP) RIGHT
INNER
TAILLIGHT
(5 W)
LEFT
INNER
TAILLIGHT
(5 W) LICENSE
PLATE
LIGHTS
(5 Wx2)
RIGHT
FRONT
PARKING
LIGHT
(3 CP) :CANline
UNDER-DASH FUSE/RELAY BOX
1
2 LEFT
FRONT
SIDE
MAKER
LIGHT
(2 CP) LEFT
FRONT
PARKING
LIGHT
(3 CP)
*1: HIGH BEAM INDICATOR (LED)
*2: LIGHTS-ON INDICATOR (LED)
*3: DRL INDICATOR (LED)
No. 19
(15 A)
No. 15
(7.5 A)
08/08/21 14:26:55 61SNR030_220_0155
ProCarManuals.com
DYNOMITE -2009-


(#' .
)
µ
µ
µ
µ µ
µ
DTC B1078:
YES
NO
YES
NO YES
NO
22-157
DTC Troubleshooting
UNDER-DASH FUSE/RELAY BOX CONNECTOR E (42P)
GND (BLK)
UNDER-DASH FUSE/RELAY BOX CONNECTOR F (34P) GND (BLK)
GND (BLK)
Daytime Running Lights System
Error
NOTE: If you are troubleshooting multiple DTCs, be
sure to follow the instructions in B-CAN System
Diagnosis Test Mode A (see page 22-93).
1. Turn the ignition switch to ON (II).
2. Pull the parking brake lever.
3. Clear the DTCs with the HDS.
4. Release the parking brake lever.
5. Turn the ignition switch to LOCK (0), and then back to ON (II).
6. Check for DTCs with the HDS.
Go to step 7.
Intermittent failure. The daytime running
lights system is OK at this time. Check for loose or
poor connections.
7. Turn the headlight switch ON (high beam).
Go to step 8.
Go to step 10.
8. Turn the ignition switch to LOCK (0). 9. Measure the voltage between under-dash fuse/
relay box connector E (42P) terminals No. 6 and
No. 33 and body ground, and between under-dash
fuse/relay box connector F (34P) terminal No. 20
and body ground individually.
Faulty MICU; replace the under-dash fuse/
relay box (see page 22-66).
Repair an open in the BLK wire or poor
ground (G 401, G501, G601, G602).
10. Turn the ignition switch to LOCK (0) and turn the headlight switch OFF.
(cont’d)
Wire side of female terminalsWire side of female terminals
Is DTC B1078 indicated?
Do bot h head l i ght s ( hi gh beam) come on? I s t her e l ess t han 0.5 V ?
08/08/21 14:26:56 61SNR030_220_0159
ProCarManuals.com
DYNOMITE -2009-



´
´ ´
´
µ
µ
µ
µ
µ
µ µ
µ
µ
µ
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
22-158Exterior Lights
DTC Troubleshooting (cont’d)
UNDER-DASH FUSE/RELAY BOX CONNECTOR F (34P)
BRH/L(HI)(WHT)
RIGHT HEADLIGHT (HIGH BEAM) 2P CONNECTOR B R H/L (HI) (WHT) UNDER-DASH FUSE/RELAY BOX CONNECTOR G (21P)
LEFT HEADLIGHT (HIGH BEAM) 2P CONNECTOR B L H/L (HI) (PNK)
B L H/L (HI) (PNK)
HEADLIGHT (HIGH BEAM) 2P CONNECTOR GND (BLK)
11. Check the No. 12, No. 13, and No. 18 fuses in theunder-dash fuse/relay box.
Go to step 12.
Replace the blown fuse and recheck. If the
No. 18 (20 A) fuse is blown again, replace the
under-dash fuse/relay box. If the No. 12 (10 A) or
No. 13 (10 A) fuse is blown again, repair a short in
the wire between the under-dash fuse/relay box
and appropriate headlight (high beam).
12. Check the headlight bulbs.
Go to step 13.
Replace the faulty bulb.
13. Disconnect under-dash fuse/relay box connectors F (34P) and G (21P).
14. Disconnect the both headlight (high beam) 2P connectors.
15. Check for continuity between right headlight (high beam) 2P connector terminal No. 2 and under-dash
fuse/relay box connector F (34P) terminal No. 22.
Go to step 16.
Repair an open in the wire between the right
headlight (high beam) and the under-dash fuse/
relay box. 16. Check for continuity between left headlight (high
beam) 2P connector terminal No. 2 and under-dash
fuse/relay box connector G (21P) terminal No. 15.
Go to step 17.
Repair an open in the wire between the left
headlight (high beam) and the under-dash fuse/
relay box.
17. Check for continuity between headlight (high beam) 2P connector terminal No. 1 and body
ground.
Faulty MICU; replace the under-dash fuse/
relay box (see page 22-66).
Repair an open in the BLK wire or poor
ground (G 201-right side, G301-left side).
Wire side of female terminals
Wire side of female terminals Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Ar e al l f uses OK ? Ar e t he head l i ght bul bs OK ?
Is there continuity? Is there continuity?
Is there continuity?
08/08/21 14:26:57 61SNR030_220_0160
ProCarManuals.com
DYNOMITE -2009-

Î
(#' .
)
µ
µ
µ
µ µ
µ
µ
µ
DTC B1279:
YES
NO
When the passing switch is operated
When the headlight switch is turned ON, and the
dimmer switch changed from low beam to high
beam
YES
NO When the combination light switch is turned OFF
YES
NO
YES
NO
22-161
UNDER-DASH FUSE/RELAY BOX CONNECTOR S (20P)
DIMMER SW
(LT BLU)
H/L ON
SW (PNK)
PASSING
SW (RED)
Headlight Switch DIMMER
Position Circuit Malfunction
NOTE: If you are troubleshooting multiple DTCs, be
sure to follow the instructions in B-CAN System
Diagnosis Test Mode A (see page 22-93).
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back to ON (II).
3. Turn the combination light (headlight) switch ON.
4. Change the dimmer switch from low beam to high beam.
5. Turn the combination light switch OFF, and then to the passing position, and wait for at least 6 seconds.
6. Check for DTCs with the HDS.
Go to step 7.
Intermittent failure, the system is OK at this
time. Check for loose or poor connections.
7. Select LIGHTING from the BODY ELECTRICAL system select menu, then enter DATA LIST.
8. Check each combination light switch position value with the DATA LIST menu.
Data List Value
Headlight Switch (PASSING) ON
Headlight Switch (High beam) OFF
Data List Value
Headlight Switch (PASSING) OFF
Headlight Switch (High beam) ON
Headlight Switch (HEADLIGHT) ON
Faulty MICU; replace the under-dash fuse/
relay box (see page 22-66).
Go to step 9. 9. Turn the ignition switch to LOCK (0).
10. Disconnect the combination light switch 12P connector.
11. Turn the ignition switch to ON (II).
12. Select LIGHTING from the BODY ELECTRICAL system select menu, then enter DATA LIST.
13. Check each combination light switch position value with the DATA LIST menu.
Data List Value
Headlight Switch (PASSING) OFF
Headlight Switch (High beam) OFF
Headlight Switch (HEADLIGHT) OFF
Go to step 17.
Go to step 14.
14. Turn the ignition switch to LOCK (0).
15. Disconnect under-dash fuse/relay box connector S (20P).
16. Check for continuity between body ground and under-dash fuse/relay box connector S (20P)
terminals No. 11, No. 12, and No. 16 individually.
Repair a short to ground in the wire.
Faulty MICU; replace the under-dash fuse/
relay box (see page 22-66).
(cont’d)
Wire side of female terminals
Is DTC B1279 indicated?
Are all data list values correct? Are all data list values indicated OFF?
Is there continuity?
08/08/22 16:38:06 61SNR030_220_0163
ProCarManuals.com
DYNOMITE -2009-