Page 48 of 218

II5 9 
Display version A
Version with Display C 
and NaviDrive
Range 
This  indicates  the  mileage  that  can  still  be  travelled  
using the fuel remaining in the tank. 
When  the  distance  remaining  to  be  travelled  is  less  
than about 25 km (approx. 15 miles), only three dashes 
are displayed. 
after  resetting  the  computer,  the  indication  of  remain- 
ing  range  is  only  reliable  after  the  vehicle  has  been 
used for a certain time. 
Average fuel consumption 
The  average  fuel  consumption  is  calculated  from  the  
last reset of the computer. 
Instantaneous fuel consumption 
This is calculated from consumption over the previous  
2 seconds. This function is only available when travel-
ling at over 30 km/h (approx. 20 mph). 
Average speed 
The  average  speed  is  obtained,  from  the  last  reset  of  
the computer, by dividing the distance covered by the 
time taken (ignition on).
Distance travelled 
It indicates the distance travelled since the trip compu- 
ter was last reset to zero.
Distance remaining to be travelled (only on 
NaviDrive) 
To enter this, see “Display C and NaviDrive”.
T R I p   C O m p U T E R                
         
        
        
     
        
        Page 52 of 218

II5 9 
Display version A
Version with Display C 
and NaviDrive
Range 
This  indicates  the  mileage  that  can  still  be  travelled  
using the fuel remaining in the tank. 
When  the  distance  remaining  to  be  travelled  is  less  
than about 25 km (approx. 15 miles), only three dashes 
are displayed. 
after  resetting  the  computer,  the  indication  of  remain- 
ing  range  is  only  reliable  after  the  vehicle  has  been 
used for a certain time. 
Average fuel consumption 
The  average  fuel  consumption  is  calculated  from  the  
last reset of the computer. 
Instantaneous fuel consumption 
This is calculated from consumption over the previous  
2 seconds. This function is only available when travel-
ling at over 30 km/h (approx. 20 mph). 
Average speed 
The  average  speed  is  obtained,  from  the  last  reset  of  
the computer, by dividing the distance covered by the 
time taken (ignition on).
Distance travelled 
It indicates the distance travelled since the trip compu- 
ter was last reset to zero.
Distance remaining to be travelled (only on 
NaviDrive) 
To enter this, see “Display C and NaviDrive”.
T R I p   C O m p U T E R                
         
        
        
     
        
        Page 54 of 218

II5 9 
Display version A
Version with Display C 
and NaviDrive
Range 
This  indicates  the  mileage  that  can  still  be  travelled  
using the fuel remaining in the tank. 
When  the  distance  remaining  to  be  travelled  is  less  
than about 25 km (approx. 15 miles), only three dashes 
are displayed. 
after  resetting  the  computer,  the  indication  of  remain- 
ing  range  is  only  reliable  after  the  vehicle  has  been 
used for a certain time. 
Average fuel consumption 
The  average  fuel  consumption  is  calculated  from  the  
last reset of the computer. 
Instantaneous fuel consumption 
This is calculated from consumption over the previous  
2 seconds. This function is only available when travel-
ling at over 30 km/h (approx. 20 mph). 
Average speed 
The  average  speed  is  obtained,  from  the  last  reset  of  
the computer, by dividing the distance covered by the 
time taken (ignition on).
Distance travelled 
It indicates the distance travelled since the trip compu- 
ter was last reset to zero.
Distance remaining to be travelled (only on 
NaviDrive) 
To enter this, see “Display C and NaviDrive”.
T R I p   C O m p U T E R                
         
        
        
     
        
        Page 56 of 218

II5 9 
Display version A
Version with Display C 
and NaviDrive
Range 
This  indicates  the  mileage  that  can  still  be  travelled  
using the fuel remaining in the tank. 
When  the  distance  remaining  to  be  travelled  is  less  
than about 25 km (approx. 15 miles), only three dashes 
are displayed. 
after  resetting  the  computer,  the  indication  of  remain- 
ing  range  is  only  reliable  after  the  vehicle  has  been 
used for a certain time. 
Average fuel consumption 
The  average  fuel  consumption  is  calculated  from  the  
last reset of the computer. 
Instantaneous fuel consumption 
This is calculated from consumption over the previous  
2 seconds. This function is only available when travel-
ling at over 30 km/h (approx. 20 mph). 
Average speed 
The  average  speed  is  obtained,  from  the  last  reset  of  
the computer, by dividing the distance covered by the 
time taken (ignition on).
Distance travelled 
It indicates the distance travelled since the trip compu- 
ter was last reset to zero.
Distance remaining to be travelled (only on 
NaviDrive) 
To enter this, see “Display C and NaviDrive”.
T R I p   C O m p U T E R                
         
        
        
     
        
        Page 58 of 218

II5 9 
Display version A
Version with Display C 
and NaviDrive
Range 
This  indicates  the  mileage  that  can  still  be  travelled  
using the fuel remaining in the tank. 
When  the  distance  remaining  to  be  travelled  is  less  
than about 25 km (approx. 15 miles), only three dashes 
are displayed. 
after  resetting  the  computer,  the  indication  of  remain- 
ing  range  is  only  reliable  after  the  vehicle  has  been 
used for a certain time. 
Average fuel consumption 
The  average  fuel  consumption  is  calculated  from  the  
last reset of the computer. 
Instantaneous fuel consumption 
This is calculated from consumption over the previous  
2 seconds. This function is only available when travel-
ling at over 30 km/h (approx. 20 mph). 
Average speed 
The  average  speed  is  obtained,  from  the  last  reset  of  
the computer, by dividing the distance covered by the 
time taken (ignition on).
Distance travelled 
It indicates the distance travelled since the trip compu- 
ter was last reset to zero.
Distance remaining to be travelled (only on 
NaviDrive) 
To enter this, see “Display C and NaviDrive”.
T R I p   C O m p U T E R                
         
        
        
     
        
        Page 170 of 218

77
press on the end of the lighting control stalk to start voice recognition and say “Help” or “What can I say ” to display the list of voice commands that are available.
CD playerDetail page 35
CD player
RandomDetail page 28listTrack number1-20previous trackNext trackscanDetail page 28Detail page 28
FolderRepeatNextpreviousJukeboxDetail page 37Detail page 37
Jukebox
RandomDetail page 28Detail page 28listTrack number1-20previous trackNext trackscanDetail page 28Detail page 28
FolderRepeatNextpreviousCD changerDetail page 41
CD changer
Disc number1-5Detail page 41Detail page 41previous discNext discRandomDetail page 28Detail page 28listTrack number1-20Detail page 41Detail page 41previous trackDetail page 41Detail page 41Next trackDetail page 41Detail page 41RepeatscanDetail page 28
Display
audioDetail page 27NavigatorDetail page 11Trip computerTelephoneDetail page 44
Telephone
Voice mailDetail page 44Redial
adress book“Pre-recorded label”Detail page 44
Call“Pre-recorded label”Detail page 46
messageDisplayDetail page 47ReadDetail page 47
Navigator
stopDetail page 11
adress book“Pre-recorded label”Detail page 12
Restar tDetail page 11
showDestinationDetail page 24VehicleDetail page 24Zoom outDetail page 18Zoom inDetail page 18guide to“Pre-recorded label”
 T r a f  fi   c   I n f oDisplayDetail page 24ReadDetail page 24RadioDetail page 33
Radio
autostoreDetail page 31listDetail page 31memor y1- 6Detail page 30previousDetail page 30NextDetail page 30
l I s T   a N D   s T R U C T U R E   O F   V O I C E 
C O m m a N D s
HOW  TO  ACCESS  THE  LIST  OF  PRE -RECORDED  VOICE  COMMANDS ?