2005 YAMAHA VX110 ad blue

7-56
E
–+ELECINDICATION SYSTEM
Overheat warning indicator
1. Check:
Overheat warning indicator
Does not come on → Replace the multi-
function meter.
Checking steps:
Start the engine.
Disconnect the thermoswitch (engine)
connector 1 (blue), engine temperature
sensor connector 2 (black), or ther-
moswitch (exhaust) 3 connector.
Connect the jumper lead to the female
terminal of the disconnected connector.
Check that the multifunction meter over-
heat warning indicator blinks, then comes
on. The buzzer also begins to sound
intermittently, then sounds continuously.
3
12
Check engine warning indicator
1. Check:
Check engine warning indicator
Does not come on → Replace the multi-
function meter.
Checking steps:
Start the engine.
Disconnect the coupler of a sensor (e.g.,
engine temperature sensor) that normally
activates the check engine warning indi-
cator when a malfunction occurs.
Check that the warning light and check
engine warning indicator begin to blink
and the buzzer sounds intermittently.
ProCarManuals.com

7-58
E
–+ELEC
REMOTE CONTROL SYSTEM
(DELUXE MODEL ONLY)
REMOTE CONTROL SYSTEM (DELUXE MODEL ONLY)
WIRING DIAGRAM
WBrBRFREE
PUSHBWFREE
PUSH
Br BrFREE
PUSHBW
BrBrBrBrR
R
10A
10A
3A
30A20A
RR
BBR
BBr
BBr
WW
WLR
Y
Y
Y
WR/Y
B
B
Pu/RPu/B
Pu/GPu/Y
W/B
GyB
B
BBBBBB
R
Y
R/Y
R/Y
B/LL/YL/B
R/YPu/G
Pu/Y
Pu/B
Pu/RR/Y
R/YR/YR/YR/YR/Y
YY
LR
BBB
B
BR
BGyRW
B/LL/R
L/RL/B
L/YL/BW/B
Br
GyBrL/R
6
6 6 6
7
8 90
4 3
5 2 C
BD
1 A
È
1Battery
2Fuse (30 A)
3Fuse (20 A)
4Fuse (3 A)
5Starter relay
6Fuel injector
7Remote control unit
8Antenna
9ECM0Buzzer
AMultifunction meter
BStart switch
CEngine stop switch
DEngine shut-off
switch
ÈTo entry boxB: Black
Br : Brown
Gy : Gray
L: Blue
R: Red
W: White
Y: Yellow
B/L : Black/blue
L/B : Blue/blackL/R : Blue/red
L/Y : Blue/yellow
Pu/B : Purple/black
Pu/G : Purple/green
Pu/R : Purple/red
Pu/Y : Purple/yellow
R/Y : Red/yellow
W/B : White/black
ProCarManuals.com

7-59
E
–+ELEC
REMOTE CONTROL SYSTEM
(DELUXE MODEL ONLY)
REMOTE CONTROL SYSTEM
Yamaha Security System indicator
1. Check:
Yamaha Security System indicator
Check that the “SECURITY” indicator
light 1 comes on when the Yamaha
Security System is deactivated (i.e., the
engine can be started).
Does not come on → Measure the
remote control unit output voltage.
2. Measure:
Remote control unit output voltage
Within specification → Replace the mul-
tifunction meter.
Out of specification → Replace the
remote control unit.
Remote control unit output
voltage:
Blue/yellow (L/Y) – ground
11–13 V
Measurement steps:
Disconnect the remote control unit 1
coupler from the multifunction meter.
Measure the remote control unit output
voltage while pushing the unlock button
of the remote control transmitter.
1
1
L/Y
1
Low-rpm mode indicator
1. Check:
Low-rpm mode indicator
Does not come on → Replace the multi-
function meter.
Checking steps:
Press the unlock button 1 of the remote
control transmitter for more than 4 sec-
onds to select the low-rpm mode.
Check that the beeper sounds three
times and that the “L-MODE” indicator
light 2 comes on.
1
ProCarManuals.com

WIRING DIAGRAM
VX110 Sport
1Battery
2Starter motor
3Fuse (30 A)
4Fuse (20 A)
5Fuse (3 A)
6Fuse (10 A)
7Fuse (10 A)
8Starter relay
9Main and fuel pump relay
0Electronic control throttle valve relay
ASlant detection switch
BIgnition coil
CSpark plug
DCam position sensor
ESensor assembly
(intake air pressure and intake air tempera-
ture)
FEngine temperature sensor
GThermoswitch (engine)
HThermoswitch (exhaust)
IOil pressure switch
JFuel injector
KECM
LRectifier/regulator
MThrottle body assembly
NAccelerator position sensor
OPickup coil
PLighting coil
QBuzzer
RElectric fuel pump
SSteering sensor
TFuel sender
USpeed sensor
VMultifunction meter
WStart switch
XEngine stop switch
YEngine shut-off switch
ÈTo tachometerColor code
B: Black
Br : Brown
G: Green
Gy : Gray
L: Blue
O : Orange
P: Pink
R: Red
W: White
Y : Yellow
B/G : Black/green
B/O : Black/orange
B/R : Black/red
B/W : Black/white
B/Y : Black/yellow
G/B : Green/black
G/O : Green/orange
G/R : Green/red
G/Y : Green/yellow
L/R : Blue/red
P/G : Pink/green
P/W : Pink/white
Pu/B : Purple/black
Pu/G : Purple/green
Pu/R : Purple/red
Pu/Y : Purple/yellow
R/W : Red/white
R/Y : Red/yellow
W/B : White/black
W/L : White/blue
W/R : White/red
Y/G : Yellow/green
Y/W : Yellow/white
ProCarManuals.com

WIRING DIAGRAM
VX110 Deluxe
1Battery
2Starter motor
3Fuse (30 A)
4Fuse (20 A)
5Fuse (3 A)
6Fuse (10 A)
7Fuse (10 A)
8Starter relay
9Main and fuel pump relay
0Electronic control throttle valve relay
ASlant detection switch
BIgnition coil
CSpark plug
DCam position sensor
ESensor assembly
(intake air pressure and intake air tempera-
ture)
FEngine temperature sensor
GThermoswitch (engine)
HThermoswitch (exhaust)
IOil pressure switch
JFuel injector
KRemote control unit
LAntenna
MECM
NRectifier/regulator
OThrottle body assembly
PAccelerator position sensor
QPickup coil
RLighting coil
SBuzzer
TElectric fuel pump
USteering sensor
VFuel sender
WSpeed sensor
XMultifunction meter
YStart switch
ZEngine stop switch
[Engine shut-off switch
ÈTo entry box
ÉTo tachometerColor code
B: Black
Br : Brown
G: Green
Gy : Gray
L: Blue
O : Orange
P: Pink
R: Red
W: White
Y : Yellow
B/G : Black/green
B/O : Black/orange
B/R : Black/red
B/W : Black/white
B/Y : Black/yellow
G/B : Green/black
G/O : Green/orange
G/R : Green/red
G/Y : Green/yellow
L/B : Blue/black
L/R : Blue/red
L/Y : Blue/yellow
P/G : Pink/green
P/W : Pink/white
Pu/B : Purple/black
Pu/G : Purple/green
Pu/R : Purple/red
Pu/Y : Purple/yellow
R/W : Red/white
R/Y : Red/yellow
W/B : White/black
W/L : White/blue
W/R : White/red
Y/G : Yellow/green
Y/W : Yellow/white
ProCarManuals.com