2005 SUBARU FORESTER tire pressure

13-4
Consumer information and Reporting safety defects
(2) Tire Size
(3) Tire Type Code
(4) Date of Manufacture
The first two figures identify the week, starting
with “01” to represent the first full week of the cal-
endar year; the second two figures represent the
year. For example, 0101 means the 1st week of
2001. T
Other markings
The following makings are also placed on the
sidewall. V Maximum permissible inflation pressure
The maximum cold inflation pressure to which
this tire may be inflated. For example, “300 kpa
(44 PSI) MAX. PRESS” V Maximum load rating
The load rating at the maximum permissible
weight load for this tire. For example, “MAX.
LOAD 670 kg (1477 LBS) @ 300 kpa (44 PSI) MAX. PRESS.”
Maximum load rating applies only to the
tire, not to the vehicle. Putting a load rated
tire on any vehicle does not mean the vehi-
cle can be loaded up to the tire’s rated
load.
V Construction type
Applicable construction of this tire.
For example, “TUBELESS STEEL BELTED RA-
DIAL” V Construction
The generic name of each cord material used in
the plies (both sidewall and tread area) of this
tire.
For example, “PLIES: SIDEWALL POLYESTER
1 TREAD POLYESTER 1 + STEEL 2 + NYLON 1” V Uniform Tire Quality Grading (UTQG)
For details, refer to “Uniform tire quality grading
standards” in this chapter.

13-5
Consumer information and Reporting safety defects
– CONTINUED –
„Recommended tire inflation pressure
T Recommended cold tire inflation pressure
Recommended cold tire inflation pressure for your vehicle’s tires is as follows,
Tire sizeP215/60R16 94H
Wheel size16 × 6 1
/2 JJ
PressureFrontLight load29 psi (200 kPa, 2.0 kgf/cm 2
)
Full load29 psi (200 kPa, 2.0 kgf/cm 2
)
RearLight load28 psi (190 kPa, 1.9 kgf/cm 2
)
Full load36 psi (250 kPa, 2.5 kgf/cm 2
)
Trailer towing41 psi (280 kPa, 2.8 kgf/cm 2
)

13-6
Consumer information and Reporting safety defects
T
Vehicle placard
The vehicle placard is affixed to the driver’s side door pillar. Example:
The vehicle placard shows original tire size, rec-
ommended cold tire inflation pressure on each
tire at maximum loaded vehicle weight, seating
capacity and loading information. T
Adverse safety consequences of under-in-
flation
Driving at high speeds with excessively low tire
pressures can cause the tires to flex severely
and to rapidly become hot. A sharp increase in
temperature could cause tread separation, and
failure of the tire(s). Possible resulting loss of ve-
USD508BAKL
TIRE AND LOADING INFORMATIONSEATING CAPACITY : TOTAL 5
ORIGINAL TIRE SIZE
SEE OWNER’S MANUAL FOR
ADDITIONAL INFORMATION
COLD TIRE
INFLATION PRESSRE
COLD TIRE
INFLATION PRESSRE
FRONT
REAR200kPa,29PSI 190kPa,28PSIP215/60R16 P215/60R16
200kPa, 29PSI
SPARE TIRE
The combined weight of occupants andcargo should never exceed 408kg or 900lbs.
FRONT 2 : REAR 3
USD507AA

13-7
Consumer information and Reporting safety defects
– CONTINUED –
hicle control could lead to an accident. TMeasuring and adjusting air pressure to
achieve proper inflation
Check and, if necessary, adjust the pressure of
each tire (including the spare) at least once a
month and before any long journey. Check the
tire pressures when the tires are cold. Use a
pressure gauge to adjust the tire pressures to the
specific values. Driving even a short distance
warms up the tires and increases the tire pres-
sures. Also, the tire pressures are affected by the
outside temperature. It is best to check tire pres-
sure outdoors before driving the vehicle. When a
tire becomes warm, the air inside it expands,
causing the tire pressure to increase. Be careful
not to mistakenly release air from a warm tire to
reduce its pressure. „ Glossary of tire terminology
y Cold tire pressure
The pressure in a tire that has been driven less
than 1 mile or has been standing for three hours
or more. y Maximum inflation pressure The maximum cold inflation pressure to which a
tire may be inflated. y
Recommended inflation pressure
The cold inflation pressure recommended by a
vehicle manufacturer. y Intended outboard sidewall
1)The sidewall that contains a whitewall, bears
white lettering or bears manufacturer, brand,
and/or model name molding that is higher or
deeper than the same molding on the other
sidewall of the tire, or
2)The outward facing sidewall of an asymmet-
rical tire that has a particular side that must al-
ways face outward when mounting on a vehi- cle.
y Accessory weight
The combined weight (in excess of those stan-
dard items which may be replaced) of floor mats,
leather seats and cross bars to the extent that
these items are available as factory-installed
equipment (whether installed or not). y Curb weight
The weight of a motor vehicle with standard
equipment including the maximum capacity of fu-
el, oil, and coolant and air conditioning.

14-7
Index
Snow tires .......................................................... 8-13
Snowy and icy roads ......................................... 8-11
Spark plugs ..................................................... 11-25
Specifications .................................................... 12-2
Speedometer ....................................................... 3-7SRS
Airbag system warning light .......................... 3-13
Frontal airbag ............................................... 1-57
Side airbag ................................................... 1-65
SRS airbags ...................................................... 1-53
Steering wheel
Power ........................................................... 7-21
Tilt wheel ...................................................... 3-39
Storage compartments ........................................ 6-4
Sun visors ............................................................ 6-3
Supplemental Restraint System airbag ............. 1-53
Synthetic leather upholstery .............................. 10-6 T
Tachometer ......................................................... 3-8
Temperature gauge ........................................... 3-10
Tie-down hooks ................................................. 9-13
Tilt steering wheel ............................................. 3-39 Tire
Chains .......................................................... 8-13
Inspection ................................................... 11-43
Pressures and wear .................................... 11-44 Replacement .............................................. 11-48
Rotation ...................................................... 11-48
Types .......................................................... 11-43
Top tether anchorages ...................................... 1-50
Towing ............................................................... 9-13
All wheels on the ground .............................. 9-15
Flat-bed truck ................................................ 9-15
Trailer
Connecting .......................................... 8-23, 8-31
Hitch .................................................... 8-22, 8-30
Towing .......................................................... 8-25
Towing tips ................................................... 8-33
Turn signal indicator lights ................................. 3-21
Turn signal lever ................................................ 3-25 U
Under-floor storage compartment ..................... 6-19 V
Valet mode ........................................................ 2-20
Vanity mirror ........................................................ 6-4
Vehicle capacity weight ..................................... 8-16
Vehicle Dynamics Control ................................. 7-28
Vehicle identification ........................................ 12-10
Ventilator ............................................................. 4-2

GAS STATION REFERENCE
Fuel: TNon-turbo models
Use only unleaded gasoline with an octane rating of
87 AKI or higher. T Turbo models
Use premium unleaded gasoline with an octane rat-
ing of 91 AKI or higher. If premium unleaded gaso-
line is not available, regular unleaded gasoline with
octane rating of 87 AKI or higher may be temporarily
used. For optimum engine performance and drive-
ability, it is required that you use premium grade un-
leaded gasoline. „ Fuel octane rating
This octane rating is the average of the Research
Octane and Motor numbers and is commonly re- ferred to as the Anti Knock Index (AKI). Refer to “Fu-
el” section in this manual.
Fuel capacity:
15.9 US gal (60 liters, 13.2 Imp gal) Engine oil:
Use only API classification SL with the words “EN-
ERGY CONSERVING” and the New API certification
mark (starburst mark) displayed on the container (IL-SAC GF-3). Engine oil capacity:
4.2 US qt (4.0 liters, 3.5 Imp qt)
Cold tire pressure:
Tire sizeP215/60R16 94H
Wheel size16 × 6 1
/2 JJ
PressureFrontLight load29 psi (200 kPa, 2.0 kgf/cm 2
)
Full load29 psi (200 kPa, 2.0 kgf/cm 2
)
RearLight load28 psi (190 kPa, 1.9 kgf/cm 2
)
Full load36 psi (250 kPa, 2.5 kgf/cm 2
)
Trailer towing41 psi (280 kPa, 2.8 kgf/cm 2
)