2005 SUBARU BAJA cooling

11 - 5
Maintenance and service
– CONTINUED –
even when the engine is stopped.
„ When you do checking or servicing in
the engine compartment while the en-
gine is running
A running engine can be dangerous. Keep your
fingers, hands, clothing, hair and tools away
from the cooling fan, belts and any other mov-
ing engine parts. Removing rings, watches and
ties is advisable.
Engine hood
0
To open the hood:
1. If the wiper blades are lifted off the windshield, re-
turn them to their original positions.
2. Pull the hood release knob under the instrument
panel.
UBB008EA

11 -1 7
Maintenance and service
– CONTINUED –
API classification SL (or SJ):
SAE viscosity No.:
30, 40, 10W-50, 20W-40, 20W-50
Cooling system
Never attempt to remove the radiator cap until
the engine has been shut off and has cooled
down completely. Since the coolant is under
pressure, you may suffer serious burns from a
spray of boiling hot coolant when the cap is re-
moved.
yThe cooling system has been filled at the fac-
tory with a high quality, corrosion-inhibiting,
year-around coolant which provides protection
against freezing down to –33 °F (–36 °C). For
adding, use genuine SUBARU coolant or an
equivalent: a mixture of 50% soft water and 50%
ethylene-glycol basis coolant. Use of improper
coolants may result in corrosion in the cooling
system. It is important to maintain protection
against freezing and corrosion, even if freezing
temperatures are not expected. Never mix dif-
ferent kinds of coolant. y Do not splash the engine coolant over paint-

11 - 1 8
Maintenance and service
ed parts. The alcohol contained in the engine
coolant may damage the paint surface.
„ Hose and connections
Your vehicle employs an electric cooling fan which is
thermostatically controlled to operate when the engine
coolant reaches a specific temperature.
If the radiator cooling fan does not operate even when
the engine coolant temperature gauge exceeds the
normal operating range, the cooling fan circuit may be
defective. Check the fuse and replace it if necessary.
If the fuse is not blown, have the cooling system
checked by your SUBARU dealer.
If frequent addition of coolant is necessary, there may
be a leak in the engine cooling system. It is recom-
mended that the cooling system and connections be
checked for leaks, damage, or looseness. „
Engine coolant
T Checking the coolant level
1) “FULL” level mark
2) “LOW” level mark
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside of the reser-
voir while the engine is cool.
2. If the level is close to or lower than the “LOW” level
mark, add coolant up to the “FULL” level mark. If the
reserve tank is empty, remove the radiator cap and re-
fill as required.
FULL
LOW1 2
UBB004FB

11 -1 9
Maintenance and service
– CONTINUED –
1) Rubber gaskets
3. After refilling the reserve tank and the radiator, re-
install the caps and check that the rubber gaskets in-
side the radiator cap are in the proper position. T Changing the coolant
Always add genuine SUBARU cooling system condi-
tioner whenever the coolant is replaced.
Change the engine coolant and add genuine SUBARU
cooling system conditioner using the following proce-
dures according to the maintenance schedule in the
“Warranty and Maintenance Booklet”.
1. Remove the under cover. Non-turbo models
1
HSB026BBUBB006CA

11 -2 1
Maintenance and service
– CONTINUED –
Turbo models
1) Filler neck
2) Fill up to here
4. Slowly pour the coolant and fill up to just below the
filler neck, allowing enough room to add genuine
SUBARU cooling system conditioner in the radiator.
Add genuine SUBARU cooling system conditioner un-
til the coolant level reaches the filler neck. Do not pour
the coolant too quickly, as this may lead to insufficient
air bleeding and trapped air in the system.
Coolant capacity (Guideline): Non-turbo models: MT. 7.2 US qt (6.8 liters, 6.0 Imp qt)
AT. 7.1 US qt (6.7 liters, 5.9 Imp qt)
Turbo models: MT. 8.1 US qt (7.7 liters, 6.8 Imp qt)
AT. 8.0 US qt (7.6 liters, 6.7 Imp qt)
yBe careful not to spill engine coolant when
adding it. If coolant touches the exhaust pipe, it
may cause a bad smell, smoke, and/or a fire. y Do not splash the engine coolant over paint-
ed parts. The alcohol contained in the engine
coolant may damage the paint surface.
1
2
USB518BB

12-7
Specifications
– CONTINUED –
Fuse panelFuse ratingCircuit
120AyRadiator cooling fan (Main)
220AyRadiator cooling fan (Sub)
330AyABS motor
420AyRear window defogger
515AyHazard warning flasher
y Horn
615AyMeter
y SRS airbag system warning light
710AyAutomatic transmis- sion control unit
y ABS UNIT
810AyAlternator
915AyHeadlight (right side)
1015AyHeadlight (left side)
1120AyLighting switch
1215AyClock
y Interior light
Fuse panelFuse ratingCircuit

14-3
Index
Cargo
Bed ............................................................... 6-16
Lamp ............................................................. 6-20
Lamp indicator light ...................................... 3-16
Net hooks ..................................................... 6-13
Tie-down hooks ............................................ 6-17
Catalytic converter ............................................... 8-4
Center
Console .......................................................... 6-5
Ventilators ....................................................... 4-2
Changing Flat tire .......................................................... 9-12
Oil and oil filter ............................................ 11-12
Charge warning light ......................................... 3-11 CHECK ENGINE warning light/ Malfunction indicator lamp ............................. 3-10
Checking
Brake pedal free play .................................. 11-41
Brake pedal reserve distance ..................... 11-42
Clutch function ............................................ 11-42
Clutch pedal free play ................................. 11-43
Engine oil level ........................................... 11-10
Fluid level ................. 11-29, 11-36, 11-38, 11-39
Gear oil level .................................... 11-27, 11-33
Child restraint systems ...................................... 1-28
Installation with seatbelt ............................... 1-32
Lower and tether anchorages ....................... 1-40 Child safety ............................................................. 5
Locks ............................................................ 2-21
Chime Key ................................................................. 3-4
Seatbelt ................................................. 1-17, 3-9
Cigarette lighter socket ........................................ 6-9
Cleaning Aluminum wheels ......................................... 10-4
Fog light lens ................................................ 10-4
Interior .......................................................... 10-6
Ventilator grille .............................................. 4-11
Clock ................................................................. 3-17
Clutch fluid ....................................................... 11-39
Clutch pedal .................................................... 11-42
Coat hook .......................................................... 6-13
Coin compartment ............................................... 6-6
Convenience hook ............................................. 6-13
Cooling system ................................................ 11-17
Corrosion protection .......................................... 10-5 Cover Soft bed ........................................................ 6-21
Cruise control .................................................... 7-38
Set indicator light .......................................... 3-16
Cup holder ........................................................... 6-7 D
Daytime running light system ............................ 3-20