Manual tuning
Automatic tuning - SEEK You can set the frequency of a requested
station by pressing button or . The
frequency keeps changing when you keep
button or pressed. Release the button
to stop tuning. The display will show the set
frequency.
You can skip to the next available station in the
currently selected band by pressing buttonor The tuner will automatically stop
when the next station is found in the desired
direction.
6
7
6
Storing the stations to presets
Recalling the presets
Automatic tuning and storing of stations
AS
STORING
Use buttons or to tune the station you want
to store. Press and hold (for approx. 2s)
selected preset button to memorise the
station. (The sound volume is lowered
temporarily and a beep sounds; then the
station is stored.) You can use6x6pr
esets.
Having stored the stations using the preset
buttons , you can press any of the buttons
briefly to recall the respective station.
The automatic tuning and storage system seeks
all stations within a selected band, selects 6
stations with the strongest signal, and stores
them as presets. Press (AutoStore) button
to start the process. The display shows a
message and the sound is muted
(see picture). 67
12
4
12
12If you select the band, memory
layer will include 6 stations with the strongest
signal in the FM band. As soon as the process is
complete, the FM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
If you select the band, memory
layer will include 6 stations with the strongest
signal in the AM band. As soon as the process is
complete, the AM- AS memory layer is
selected, and preset is chosen. You can switch
to other presets by pressing one of the preset
buttons .
Each use of the function updates and
rewrites the presets in the currently selected
band (FM- AS or AM- AS). FM FM- AS
1
AM AM- AS 1
AS
12
12
Tuning and Storing the Stations
5
Operation of the Radio
GB
Ejecting the discEJECT
SELECT CD TO EJECT
PLEASE WAIT REMOVE CDINSERT CD
LOA D
Tip EJECT
EJECT
ALL When replacing or ejecting the disc, observe
the instructions in this manual and on the radio
display:
1. Press button .
2. After “ ” message ap- pears, press preset button corres-
ponding to the disk you want to eject.
3. “ ” message appears and the drive prepares for ejection of selected disc.
4. Disc is being ejected and “ ” message appears. You can remove the disc.
5. After removing the disc, “ ” message appears and you can insert
another disc without having to press the
button
: Press and hold button to eject all
discs from the changer. After message appears, release the button.
If you do not remove ejected disc from the unit,
it will be drawn back to the unit automatically
for safety reasons. If no CD is inserted in the
changer, the unit switches to radio mode
automatically after 10s. 13
12
17 13
Operation of the Built- In CD changer
SCAN functionSCAN
OK
Stopping playback FM AM
Press button to start searching through
the disc. A 10- second sample of the beginning
of each track is played. The sequence number
of the track on the disc is displayed at the same
time.
Press preset button to end the scan
mode. Current track will be played normally.
To stop disc playback and to switch on the
radio, press button or .
The last selectedstation will play. 5
3912
Selection of discs and tracks
CD1-
CD6 NO CD
Track select buttons
Seek buttons In CD playback mode, you can select a disc by
pressing a preset button labelled . Empty positions are labelled .
During CD playback, press button to skip
to previous track.
Press button to skip to next track. Playback
starts from the beginning of selected track.
Press and hold button or for fast rewind
or fast forward within a track of the CD. Normal
playback resumes after you release the button.
12
6
6
7
11
GB
