BRIEF OPERATING INSTRUCTIONS
3
Pos. ................................................... Page
1– Tone control .................................... 8Press the tone control buttons and
turn the control knob/push button
8
to change the setting.
– 1 pressure: bass control (BASS)
– 2 pressures: treble control (TRE)
2– Tone balance button ........................ 9 Press the tone balance button and
turn the control knob/push button
8to
change the setting
– 1 pressure: fader (FAD)
– 2 pressures: balance (BAL)
3– Station buttons ............................... 11 for 12 FM and 12 AM stations.
4– AS button.......................................... 6 This button serves for the automatic
storage of 6 stations in every range.
5– A/F button ......................................... 6 This button serves for switching over
between FM 1/2 and AM 1/2 mode.
Pos. ................................................... Page
6– SCN button ....................................... 6Pressing this button briefly plays sta-
tions in radio mode.
7– TP/Set button ................................. 11Briefly pressing this button switches
on the traffic programme functions.
Pressing this button a longer time dis-
plays the Setup menu.
8– Control knob/push button ................. 5
– Switch on/off: press the button.
– Volume control: turn the knob.
– Tone control: press the tone control button
1then turn the control knob.
– Tone balance: press the tone balance button
2then turn the control knob.
ß?– Cassette compartment ................... 13
ßW– Autoreverse/Cassette ejection ............................ 13
Brief pressure: autoreverse.
Long pressure: cassette ejection.
Pos. ................................................... Page
ßE– Station search rocker ..................... 12Briefly press the rocker to start a sta-
tion search cycle in the AM range.
When in the FM range, you can scroll
through the memory list.
Display
9– TP indication .................................... 2
ßI– Wavebands ...................................... 2
ß`– Station buttons indication ................. 2
ßQ– Station name .................................... 2
8
Tone control
Treble control (TRE)
• "TRE" and the current setting + 6 to – 6appear in the display
• Turn the control knob/push button
8to
the left or the right to adjust the desired
setting.
• If you wish to adjust the treble control immediately to its centre setting, press
the AUD button
1until "TRE 00"
appears in the display.
• When this is done, press the AUD button
1again to store the setting.
• To go directly to the treble control mode, press the AUD button
1briefly twice.
RADIO MODE
1– Tone control button
After pressing the AUD button 1, the fol-
lowing indications appear in the display:
• 1 pressure: bass control "BASS",
• 2 pressures: treble control "TRE".
You may change the tone control setting
by turning the control knob/push button
8.
AUDGEO11AUD
Bass control (BASS)
• Press the AUD button
1. "BASS" and
the current setting + 6 to – 6 appear in the
display.
• Turn the control knob/push button
8to
the left or the right to adjust the desired
setting.
• If you wish to adjust the bass control immediately to its centre setting, press
the AUD button
1until "BASS 00"
appears in the display.
• When this is done, press the AUD button
1again to store the setting. This will sel-
ect at the same time the treble control
mode.
1
8
