2005 SKODA FABIA MS202 Car Radio Manual

www.skoda-auto.cz
www.skoda-auto.comAutorádio MS 202
Škoda Auto 08.03ŠkodaAutorádio MS 202
ŠkodaAutoradio
ŠkodaCar radio

1
GENERAL VIEW2
BRIEF OPERATING INSTRUCTIONS3
IMPORTANT INFORMATION 4
RADIO MODE5
CASSETTE MODE12
SETTINGS13
THEFT PROTECTION
CODING15
HINTS17
BRIEF TECHNICAL
DESCRIPTION18
CE
This unit corresponds to the EMV protec-
tive requirements (EC directives 89/336
EWG and 93/68/EWG) according to the
EN 55013 and EN 55020 norms.
CONTENTS
GB
F
I
NL
E
P

GENERAL VIEW
2
AUDGEO1TP123456A/F
TP
AUDGEOTP123456A/F
TP
›1›2›3›4›5
›6›7›8›9›10›11›12›13

GB
BRIEF OPERATING INSTRUCTIONS
3
Pos. ................................................... Page
1– Tone control .................................... 6Press the tone control buttons and
turn the control knob/push button
6
to change the setting.
– 1 pressure: bass control (BASS)
– 2 pressures: treble control (TRE)
2– Tone balance button ........................ 7 Press the tone balance button and
turn the control knob/push button
6to
change the setting pressures:
balance (BAL)
3– Station buttons ................................. 9 for 12 FM and 12 AM stations.
4– A/F button ......................................... 6 This button serves for switching over
between FM 1/2 and AM 1/2 mode.
5– TP/Set button ................................. 10 Briefly pressing this button switches
on the traffic programme functions.
Pressing this button a longer time dis-
plays the Setup menu.
Pos. ................................................... Page
6– Control knob/push button ................. 5
– Switch on/off: press the button.
– Volume control: turn the knob.
– Tone control: press the tone control button
1then turn the control knob.
– Tone balance: press the tone balance button
2then turn the control knob.
9– Cassette compartment ................... 12
ß`– Cassette ejection ............................ 12
ßQ– Station search rocker ...................... 8Briefly press the rocker to start a sta-
tion search cycle in the AM range.
When in the FM range, you can scroll
through the memory list.
Pos. ................................................... Page
Display
7– TP indication .................................... 2
8– Wavebands ...................................... 2
ßI– Station buttons indication ................. 2
ß?– Station name .................................... 2

Operation while driving
4
IMPORTANT INFORMATION
The requirements in today’s road traffic
call for the full attention of the road users
at any time.
The comprehensive and pretentious fea-
tures of modern car radios offer a lot of
information about traffic and road condi-
tions besides an abundance of entertain-
ment.
However, the radio system with its many
functions should only be operated if the
traffic situation allows for this.
For example, changing cassettes or read-
ing a cassette lable while driving has
already often led to dangerous situations.
In addition, the volume of the radio system
should always be adjusted so that you can
still safely hear outside acoustic signals.
Caution
Keep complete control of your
vehicle at all times!

GB
Control knob/push button
5
6– Control knob/push button
This knob/button permits:
• Switching on/off the radio
• Volume control
• Tone control
• Tone balance control
AUDGEO11
Switching on/off,
volume control
Pressing the push button 6switches
the radio on and off.
The frequency and volume adjusted befo-
re switching off are recovered.
If the ignition key is removed from the igni-
tion lock with the radio switched on, the
radio is automatically switched off.
If the ignition key is refit into the ignition
lock and turned, the radio is automatically
switched on.
If the ignition key is pulled out, you may
switch on the radio by pressing the control
knob/push button
6twice.
After about 1 hour the radio is automati-
cally switched off to avoid discharging of
the car battery.
You may repeat this operation as often as
desired.
If the car radio remains mute after switch-
ing on and "SAFE" appears in the display,
observe the notes from page 16.
Turning the control knob
6allows you
to change the volume, the tone or the tone
balance settings.
AUDGEO11
RADIO MODE
66

Bass control (BASS)
• Press the AUD button
1. "BASS" and
the current setting + 6 to – 6 appear in the
display.
• Turn the control knob/push button
6to
the left or the right to adjust the desired
setting.
• If you wish to adjust the bass control immediately to its centre setting, press
the AUD button
1until "BASS 00"
appears in the display.
• When this is done, press the AUD button
1again to store the setting. This will sel-
ect at the same time the treble control
mode.
RANGE SELECTION BUTTONTone control
6
RADIO MODE
4– A/F button
Use the A/F button 4to switch between
the "FM" and "AM" ranges.
Press the A/F button
4repeatedly to
switch between the memory levels "FM1"
and "FM2" or “AM1“ and “AM2“.
The display shows "FM1" or "FM2" for the
memory levels in the FM range, and
"AM1" or "AM2" for the memory levels in
the AM range.
TP6A/FA/F4
1– Tone control button
After pressing the AUD button 1, the fol-
lowing indications appear in the display:
• 1 pressure: bass control "BASS",
• 2 pressures: treble control "TRE".
You may change the tone control setting
by turning the control knob/push button
6.
AUDGEO11
TP
AUD1
6

Treble control (TRE)
• "TRE" and the current setting + 6 to – 6appear in the display
• Turn the control knob/push button
6to
the left or the right to adjust the desired
setting.
• If you wish to adjust the treble control immediately to its centre setting, press
the AUD button
1until "TRE 00"
appears in the display.
• When this is done, press the AUD button
1again to store the setting.
• To go directly to the treble control mode, press the AUD button
1briefly twice.
7
GB
Tone control Tone balance control
Balance (BAL)
With this function you may adjust the volu-
me balance of the left/right loudspeakers.
• "BAL" and the current setting (from LEFT
15 via CENTER to RIGHT 15) appear in
the display.
•Turn the control knob/push button
6to
the left or the right to adjust the desired
setting.
• If you wish to adjust the Balance control immediately to its centre setting, press
the GEO button
2until "CENTER"
appears in the display.
• When this is done, press the GEO button
2again to store the setting.
• To go directly to the balance control mode, press the GEO button
2briefly.
RADIO MODE
2– Tone balance button
After pressing the tone balance button
GEO
2, the following indications appear
in the display:
• Balance (BAL)
Turn the control knob/push button
6to
the left or the right to adjust the desired
setting.
AUDGEO11
TP
GEO
6
2