2005 Seat Cordoba tow

102Climate control
D
De
em
mi
is
st
t wwi
in
nd
ds
sc
cr
re
ee
en
ns
s,
, ffr
ro
on
nt
t aan
nd
d ssi
id
de
e wwi
in
nd
do
ow
ws
s
If windshields fog up when air humidity is high (i.e. if it is raining),
the following is recommended:
•Rotary knob
Ato heating (hot), if necessary.
•Rotary knob
Bto speed 2or 3.
•Rotary knob
Con
•Vents
3closed.
•Vents
4closed and oriented towards side windows.
Once defogged and as a preventative measure you can place
control
Cto the position. This way you will achieve more
comfort and avoid fogging of windshields again.
R Ra
ap
pi
id
d hhe
ea
at
ti
in
ng
g oof
f tth
he
e cca
ab
bi
in
n
•Rotary knob
Ato the right to the stop (red point).
•Rotary knob
Bto speed 3.
•Rotary knob
Con
•Vents
3and 4open.
C Co
om
mf
fo
or
rt
ta
ab
bl
le
e hhe
ea
at
ti
in
ng
g oof
f tth
he
e cca
ab
bi
in
n
Once the windshield is defogged and the desired temperature is
reached, the following should be applied:
•Rotary knob
Bto the desired speed.
•Rotary regulator
Ato the desired heating position.
•Turn rotary regulator
Cto the area between the air distribution at
and
⇒fig. 84.•If the windshield is fogged up, rotary regulator
Con
•Close vents
3.
•With vents
4you can adjust the hot air flow and direction.
V Ve
en
nt
ti
il
la
at
ti
io
on
n ((f
fr
re
es
sh
h aai
ir
r)
)
With the following setting fresh air flows from vents
3and 4
without heating:
•Rotary knob
Bto desired speed.
•Rotary knob
Ato the left stop (blue point).
•Rotary regulator
Cto
•If the windshield fogs up, rotary regulator
Cto
•Open vents
3and 4.
If necessary regulator
Ccan be turned to other positions.K
General notes
•To ensure proper functioning of the heating and ventilation
system, any object must be removed from the air inlet on the grid
below the windscreen.
•Only controls
Aand Ccan be adjusted to any intermediate
position.
•When driving at low speed select a slow ventilation speed and
place control
Cat to avoid fogging up of the windshields.
•Since heating efficiency depends on the coolant fluid
temperature, full heating power occurs when the engine has
reached its operating temperature.


111 Climate control
Safety FirstControls and equipment Tips and Maintenance Technical Data
K
Ke
ey
y
By pressing the key, the system directs the air towards the
grid of the windshield and the side windows (
1, 2).
When pressing this key, the system understands that the
windshield is fogged up/frozen and, therefore, it becomes a
priority to execute said operation. It will deactivate the air
recirculation mode, should it be activated, it will increase fan
speed and deactivate ECON mode, should it be activated.
is displayed.
Maximum efficiency is reached by having vents
3closed and 4
facing the side windows.
E EC
CO
ON
N kke
ey
y
By pressing this key the air conditioning compressor is
disconnected.
The word "ECON" is displayed.
When the compressor is deactivated, the fuel consumption
decreases.
When this function is activated, the Climatronic manages the
interior temperature regulation without the air conditioner.
If the selected temperature is lower than the outside temperature,
the selected temperature will not be reached.
Depending on the exterior climate conditions (low outside
temperature and low humidity), it is not necessary to switch on the
air conditioner since you can activate the ECON mode.
In vehicles fitted with additional heating*, this function is
deactivated.R Re
ec
ci
ir
rc
cu
ul
la
at
ti
io
on
n kke
ey
y
By pressing this key, the air recirculation mode is activated.
With this function the entry of air from outside is closed. If a fan
speed has been selected, the air is drawn from the interior instead
of from outside, thus allowing for the air to recirculate. This way,
the entry of bad odors, smoke and dust can be momentarily
avoided.
It is not advisable to use recirculation for an extended period of
time since the air in the cabin is not replaced and would, therefore,
become very stale and dry.
The recirculation symbol is displayed if this mode is activated.
A Ai
ir
r ddi
is
st
tr
ri
ib
bu
ut
ti
io
on
n sse
el
le
ec
ct
ti
io
on
n kke
ey
y
By pressing the keys illustrated in the figure, you can manually
select the origin of the air inlet into the cabin.
If the
A AU
UT
TO
Omode is activated and any of these keys are pressed
the system will switch to
M MA
AN
NU
UA
AL
Lmode. Arrows indicating the air
outlet areas are displayed.
S Sy
ym
mb
bo
ol
l oof
f ssw
wi
it
tc
ch
h…
…A
Ai
ir
r oou
ut
tp
pu
ut
t ddi
is
st
tr
ri
ib
bu
ut
ti
io
on
n tth
hr
ro
ou
ug
gh
h tth
he
e vve
en
nt
ts
s:
:
1, 2
5
3, 4


114Driving
situation, an “e
ec
co
on
no
om
my
y”,
, low-consumption, or a more “s
sp
po
or
rt
ty
y”
programme will be selected.
The programme is selected a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y
depending on the
movement of the accelerator pedal.
If the accelerator pedal is moved slowly, or at a normal rate, the
gearbox will shift into a higher gear earlier, and down into a lower
gear later to r re
ed
du
uc
ce
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
.
A more “s sp
po
or
rt
ty
y
” programme is selected when the accelerator pedal
movesf fa
as
st
t
. The pedal does not have to be depressed to the point
ofk ki
ic
ck
k-
-d
do
ow
wn
n
⇒page 116. In this mode, the gearbox will shift up
later to make full use of the engine power reserves.
The downward shift occurs at a higher rate of revolutions than in
the economy programmes.
The gear box is self adapting, and continuously selects the most
suitable gear programme. At the same time, the driver can also
make the gear box switch to a more “sporty” programme by
pressing the accelerator quickly. Depending on road speed, this
makes the gearbox shift down early into a lower gear for quicker
acceleration (for instance to overtake another vehicle), without
having to press the accelerator all the way down to the kick-down
position. After the gear box has shifted back up it returns to the
original programme, depending on your style of driving.
The gear box adapts the gear shifts for uphill and downhill
gradients. This prevents the gearbox from shifting up and downunnecessarily on uphill gradients. On downhill gradients, the
gearbox shifts down into a lower gear when the driver presses the
brake pedal. This makes use of the braking effect of the engine
without having to change down manually
N No
ot
te
e
Depending on road resistance, for example when trailer towing or on uphill
stretches, a programme is automatically selected which provides more
power by shifting into a lower gear. This prevents frequent gear changes.
K
Selector lever lock
In positions “P P
” and “N N
” with the ignition switched on the selector
lever is locked. To move the selector lever out of these positions
the brake pedal must be depressed and the selector lever button
pushed-in. This prevents a gear being engaged inadvertently and
the vehicle unintentionally moving off.
A delay circuit prevents the selector lever from locking when it is
moved quickly past the “N N
” position (for instance from “R R
” to “D D
”).
This enables for example the vehicle to be “rocked” out of a
“bogged down” position. The shift lock only locks the selector
lever if it is left in the “N N
” position for more than about 1 second
without the brake pedal being depressed.
At speeds above 5 km/h the selector lever lock is automatically
switched-off in position “N N
”.
K

117 Driving
Safety FirstControls and equipment Tips and Maintenance Technical Data
M
Mo
ov
vi
in
ng
g oof
ff
f
Select driving range (R R
, D D
, 3 3
, 2 2
, 1 1
).W Wa
ai
it
t uun
nt
ti
il
l tth
he
e gge
ea
ar
rb
bo
ox
x hha
as
s
s sh
hi
if
ft
te
ed
d aan
nd
d tth
he
e ppo
ow
we
er
r ffl
lo
ow
w iis
s mma
ad
de
e tto
o tth
he
e ddr
ri
iv
vi
in
ng
g wwh
he
ee
el
ls
s
(light
selection jerk perceptible). T Th
he
en
n oon
ne
e cca
an
n aac
cc
ce
el
le
er
ra
at
te
e.
.
S St
to
op
pp
pi
in
ng
g
When the vehicle is stopped for a short period, for example at
trafficlights, it is only necessary to apply the brakes. It is not
necessary to move selector lever to “N N
”. The engine should
however only be running at idling speed.
P Pa
ar
rk
ki
in
ng
g
On a gradient the handbrake should be applied firmly first and
then the parking lock engaged. This will ensure that the locking
mechanism is not too heavily loaded and makes the lock easier to
disengage.
E Em
me
er
rg
ge
en
nc
cy
y sst
ta
ar
rt
ti
in
ng
g
On vehicles with automatic gearbox the engine cannot be started
by towing or pushing the vehicle
⇒"Tow start/towing" chapter.When the battery is flat, the engine can be started from the battery
of another vehicle by using jumper cables
⇒“Starting help”
chapter.
T To
ow
wi
in
ng
g
If a vehicle must be towed instructions in the "Tow start/towing"
chapter must be followed strictly.
E Em
me
er
rg
ge
en
nc
cy
y ppr
ro
og
gr
ra
am
m
In case of an electronic failure of the gearbox, emergency programs
are activated depending on the type of failure.
• The gear box continues to shift automatically, but strong jerking
is noticeable. Consult a Technical Service Centre.
• The gear box no longer shifts automatically.
In this case, you can shift manually. Only the 3 3r
rd
d
gear is available
in the positions "D D
", "3 3
" and "2 2
" of the selector lever.
In the positions "1 1
" and "R R
" of the selector lever, the 1 1s
st
t
gear and
reverse gear, respectively, are available as customary.
It may happen that the gear oil is overheated when the torque
converter has to work harder, especially if2 2n
nd
d
gear is missing.
In such cases, go to a Technical Service Centre as soon as possible.
K
T
To
o ppr
re
ev
ve
en
nt
t tth
he
e vve
eh
hi
ic
cl
le
e ffr
ro
om
m rro
ol
ll
li
in
ng
g aaw
wa
ay
yi
in
na
ad
dv
ve
er
rt
te
en
nt
tl
ly
y,
, yyo
ou
u ssh
ho
ou
ul
ld
d aal
lw
wa
ay
ys
s
a ap
pp
pl
ly
y tth
he
e hha
an
nd
db
br
ra
ak
ke
e ffi
ir
rm
ml
ly
y wwh
he
en
n tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s cco
om
me
e tto
o tth
he
e cco
om
mp
pl
le
et
te
e
s st
to
op
p.
. AAl
ls
so
o ppl
la
ac
ce
e tth
he
e gge
ea
ar
r sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r iin
n ppo
os
si
it
ti
io
on
n ““P
P”
”.
.
W
WA
AR
RN
NI
IN
NG
G

120Driving
S
St
ta
ar
rt
ti
in
ng
g tth
he
e een
ng
gi
in
ne
e
General notes
• Before starting, move gear lever to neutral (with automatic
gearbox, selector lever in “P” or “N” position) and apply handbrake
firmly.
• On vehicles with a manual gearbox depress the clutch pedal
when operating starter so that starter only has to turn engine.
• As soon as engine starts, release the ignition key so that starter
can disengage.
• After starting a cold engine it may sound noisy for a moment or
two because the oil pressure has to build up in the hydraulic
tappets first. This is normal and no cause for alarm.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Do not warm the engine up by running it when the vehicle is stationary.
Begin driving the vehicle as soon as possible.
C Ca
au
ut
ti
io
on
n
• Do not over-rev or use full throttle until the engine has reached the normal
operating temperature.
• On vehicles with a catalytic converter the engine must not be started by
towing the vehicle in excess of 50 m. Otherwise unburned fuel can pass into
the converter and lead to damage.
• Before trying to start the engine by towing, an attempt should be made, if
possible, to use the battery of another vehicle
⇒"Emergency starting"
chapter.K
Petrol engines
The engine is equipped with a fuel injection system that
automatically supplies the correct air/fuel mixture.
When engine i is
s cco
ol
ld
d oor
r aat
t oop
pe
er
ra
at
ti
in
ng
g tte
em
mp
pe
er
ra
at
tu
ur
re
e
do n no
ot
t
accelerate
before or during the starting procedure.
If the engine does not start at once, stop using the starter after 10
seconds. Wait about half a minute and then try again.
If the engine still does not start, the electric fuel pump fuse may
have blown
⇒ "Fuses" chapter".
When the engine i is
s vve
er
ry
y hho
ot
t
it may be necessary to accelerate
slightly after the engine has started.
K
W Wh
he
en
n rru
un
nn
ni
in
ng
g tth
he
e een
ng
gi
in
ne
e iin
n cco
on
nf
fi
in
ne
ed
d ssp
pa
ac
ce
es
s tth
he
er
re
e iis
s aa dda
an
ng
ge
er
r oof
f
p po
oi
is
so
on
ni
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G

130Intelligent technology
I
In
nt
te
el
ll
li
ig
ge
en
nt
t tte
ec
ch
hn
no
ol
lo
og
gy
y
B
Br
ra
ak
ke
es
s
General notes
• Brake lining wear depends to a large extent on the operating
conditions and style of driving. On vehicles which are used mainly
in town traffic and stop/ start conditions or are driven hard it may
be necessary to have the thickness of the brake linings checked by
a Technical Service Centre in between the intervals given in the
Inspection and Service Schedule.
• Change down in good time when driving downhill, in order to
make use of the engine braking effect. This relieves strain on the
brake system. When the brakes are applied do not keep them on
continuously, apply and release alternately.
K
What can have a negative effect on the brakes?
W We
et
t oor
r ggr
ri
it
tt
te
ed
d rro
oa
ad
d ssu
ur
rf
fa
ac
ce
eO Ov
ve
er
rh
he
ea
at
ti
in
ng
g oof
f tth
he
e bbr
ra
ak
ke
es
s
•U
Un
nd
de
er
r cce
er
rt
ta
ai
in
n cco
on
nd
di
it
ti
io
on
ns
s ee.
.g
g.
. aaf
ft
te
er
r ddr
ri
iv
vi
in
ng
g tth
hr
ro
ou
ug
gh
h wwa
at
te
er
r,
, hhe
ea
av
vy
y rra
ai
in
n ffa
al
ll
ls
s
o or
r aaf
ft
te
er
r tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s bbe
ee
en
n wwa
as
sh
he
ed
d,
, tth
he
e bbr
ra
ak
ke
es
s cco
ou
ul
ld
d sse
et
t iin
n lla
at
te
er
r tth
ha
an
n
n no
or
rm
ma
al
l ddu
ue
e tto
o dda
am
mp
p,
, oor
r iin
n wwi
in
nt
te
er
r –– ffr
ro
oz
ze
en
n,
, bbr
ra
ak
ke
e ddi
is
sc
cs
s aan
nd
d lli
in
ni
in
ng
gs
s –– tth
he
e
b br
ra
ak
ke
es
s mmu
us
st
t ffi
ir
rs
st
t bbe
e ddr
ri
ie
ed
d tth
hr
ro
ou
ug
gh
h cca
ar
re
ef
fu
ul
l bbr
ra
ak
ki
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G
•F Fu
ul
ll
l bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r mmi
ig
gh
ht
t aal
ls
so
o sse
et
t iin
n lla
at
te
er
r tth
ha
an
n nno
or
rm
ma
al
l eev
ve
en
n wwh
he
en
n ddr
ri
iv
vi
in
ng
g
o on
n ggr
ri
it
tt
te
ed
d rro
oa
ad
ds
s iif
f yyo
ou
u hha
av
ve
e nno
ot
t bbr
ra
ak
ke
ed
d ffo
or
r sso
om
me
e tti
im
me
e –– tth
he
e lla
ay
ye
er
r oof
f ssa
al
lt
t oon
n
t th
he
e bbr
ra
ak
ke
e ddi
is
sk
ks
s aan
nd
d bbr
ra
ak
ke
e lli
in
ni
in
ng
gs
s mmu
us
st
t ffi
ir
rs
st
t bbe
e wwo
or
rn
n ddo
ow
wn
n wwh
hi
il
ls
st
t bbr
ra
ak
ki
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
• • NNe
ev
ve
er
r lle
et
t tth
he
e bbr
ra
ak
ke
es
s ““r
ru
ub
b”
” bby
y ppr
re
es
ss
si
in
ng
g tth
he
e ppe
ed
da
al
l tto
oo
o lli
ig
gh
ht
tl
ly
y wwh
he
en
n yyo
ou
u ddo
o
n no
ot
t rre
ea
al
ll
ly
y nne
ee
ed
d tto
o bbr
ra
ak
ke
e.
. TTh
hi
is
s cca
au
us
se
es
s tth
he
e bbr
ra
ak
ke
es
s tto
o oov
ve
er
rh
he
ea
at
t,
, lle
ea
ad
ds
s tto
o
l lo
on
ng
ge
er
r bbr
ra
ak
ki
in
ng
g ddi
is
st
ta
an
nc
ce
es
s aan
nd
d tto
o aa hhi
ig
gh
he
er
r lle
ev
ve
el
l oof
f wwe
ea
ar
r.
.
• • BBe
ef
fo
or
re
e sst
ta
ar
rt
ti
in
ng
g oon
n aa llo
on
ng
g sst
tr
re
et
tc
ch
h oof
f rro
oa
ad
d iin
n aa vve
er
ry
y hhi
il
ll
ly
y aar
re
ea
a,
, ppl
le
ea
as
se
e rre
ed
du
uc
ce
e
y yo
ou
ur
r ssp
pe
ee
ed
d,
, cch
ha
an
ng
ge
e tto
o aa llo
ow
we
er
r gge
ea
ar
r ((m
ma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x)
) oor
r cch
ho
oo
os
se
e aa llo
ow
we
er
r
p po
os
si
it
ti
io
on
n ((a
au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
rb
bo
ox
x)
).
. IIn
n tth
hi
is
s wwa
ay
y yyo
ou
u wwi
il
ll
l uus
se
e tth
he
e bbr
ra
ak
ki
in
ng
g ppo
ow
we
er
r oof
f
t th
he
e een
ng
gi
in
ne
e aan
nd
d rre
el
li
ie
ev
ve
e ppr
re
es
ss
su
ur
re
e oon
n tth
he
e bbr
ra
ak
ke
es
s.
.
• • IIf
f aa ffr
ro
on
nt
t ssp
po
oi
il
le
er
r,
, ffu
ul
ll
l ssi
iz
ze
e wwh
he
ee
el
l ttr
ri
im
ms
s eet
tc
c.
.,
, iis
s rre
et
tr
ro
of
fi
it
tt
te
ed
d,
, iit
t iis
s nne
ec
ce
es
ss
sa
ar
ry
y tto
o
e en
ns
su
ur
re
e tth
ha
at
t tth
he
e ffl
lo
ow
w oof
f aai
ir
r tto
o tth
he
e ffr
ro
on
nt
t bbr
ra
ak
ke
es
s iis
s nno
ot
t rre
es
st
tr
ri
ic
ct
te
ed
d –– oot
th
he
er
rw
wi
is
se
e
t th
he
e bbr
ra
ak
ke
es
s cca
an
n oov
ve
er
rh
he
ea
at
t.
.
K
W WA
AR
RN
NI
IN
NG
G

135 Your vehicle and the environment
Safety FirstControls and equipment Tips and Maintenance Technical Data
Y
Yo
ou
ur
r vve
eh
hi
ic
cl
le
e aan
nd
d tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
T
Th
he
e ffi
ir
rs
st
t 11,
,5
50
00
0 kkm
m –– aan
nd
d aaf
ft
te
er
rw
wa
ar
rd
ds
s
Running-in
During the first few operating hours the engine internal friction is
higher than later on when all the moving parts have bedded down.
How well this running-in process is done depends to a
considerable extent on the way the vehicle is driven during the first
1,500 km.
K
Up to 1,000 kilometres
the following general rules apply:
•D Do
o nno
ot
t uus
se
e ffu
ul
ll
l tth
hr
ro
ot
tt
tl
le
e
•D Do
o nno
ot
t ddr
ri
iv
ve
e ffa
as
st
te
er
r tth
ha
an
n 33/
/4
4 oof
f tto
op
p ssp
pe
ee
ed
d
•A Av
vo
oi
id
d hhi
ig
gh
h een
ng
gi
in
ne
e ssp
pe
ee
ed
ds
s
•Trailer towing should if possible be avoided.
From 1,000 – 1,500 km
The speed can be gradually increased to the road or engine
maximum.
K
During and after the running-in period the following
applies:
•Do not overrev the engine when cold – either in neutral or in the
gears.
All speeds and revs given are only valid when engine isp pr
ro
op
pe
er
rl
ly
y
w wa
ar
rm
m
.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Do not drive with the engine speed unnecessarily high – changing up
early helps to save fuel, reduces noise and protects the environment⇒"Environment friendly and economical driving" chapter.
•Do not let engine labour – change down when engine no longer
runs smoothly.
K
• • NNe
ew
w tty
yr
re
es
s mmu
us
st
t aal
ls
so
o bbe
e ““r
ru
un
n iin
n”
” bbe
ec
ca
au
us
se
e tth
he
ey
y ddo
o nno
ot
t hha
av
ve
e mma
ax
xi
im
mu
um
m
a ad
dh
he
es
si
io
on
n aat
t tth
he
e sst
ta
ar
rt
t.
. TTh
hi
is
s mmu
us
st
t bbe
e tta
ak
ke
en
n iin
nt
to
o aac
cc
co
ou
un
nt
t bby
y ddr
ri
iv
vi
in
ng
g cca
ar
re
ef
fu
ul
ll
ly
y
d du
ur
ri
in
ng
g tth
he
e ffi
ir
rs
st
t 110
00
0 kkm
m.
.
• • NNe
ew
w bbr
ra
ak
ke
e lli
in
ni
in
ng
gs
s mmu
us
st
t aal
ls
so
o bbe
e rru
un
n iin
n aan
nd
d ddo
o nno
ot
t hha
av
ve
e tth
he
e oop
pt
ti
im
mu
um
m
f fr
ri
ic
ct
ti
io
on
n ppr
ro
op
pe
er
rt
ti
ie
es
s ddu
ur
ri
in
ng
g tth
he
e ffi
ir
rs
st
t 220
00
0 kkm
m.
. TTh
he
e ssl
li
ig
gh
ht
tl
ly
y rre
ed
du
uc
ce
ed
d bbr
ra
ak
ki
in
ng
g
W
WA
AR
RN
NI
IN
NG
G
e ef
ff
fe
ec
ct
t cca
an
n bbe
e cco
om
mp
pe
en
ns
sa
at
te
ed
d ffo
or
r bby
y mmo
or
re
e ppr
re
es
ss
su
ur
re
e oon
n tth
he
e bbr
ra
ak
ke
e ppe
ed
da
al
l.
. TTh
hi
is
s
a al
ls
so
o aap
pp
pl
li
ie
es
s wwh
he
en
n nne
ew
w lli
in
ni
in
ng
gs
s hha
av
ve
e bbe
ee
en
n ffi
it
tt
te
ed
d.
.
K
W WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)

136Your vehicle and the environment
After the running-in period
•On vehicles with a rev counter* the maximum permissible engine
speed is shown by the beginning of the red zone on the rev
counter scale. The needle of the counter must not move into this
zone.
Extremely high engine revs will be automatically governed.
K
C Cl
le
ea
an
ni
in
ng
g tth
he
e eex
xh
ha
au
us
st
t ffu
um
me
es
s
Description
T
Th
he
e ppe
er
rf
fe
ec
ct
t ffu
un
nc
ct
ti
io
on
ni
in
ng
g oof
f tth
he
e ccl
le
ea
an
ni
in
ng
g ssy
ys
st
te
em
m ffo
or
r eex
xh
ha
au
us
st
t ffu
um
me
es
s
is of great importance for the environment-friendly functioning of
your vehicle.
Therefore, keep in mind the following points:
•Versions with a catalytic converter must only use unleaded fuel
⇒"Filling the tank" chapter.
•In vehicles with a catalytic converter never drive until the fuel
tank is completely empty. Irregular fuel supply can cause misfiring,
thus allowing unburned fuel into the exhaust system which can
cause overheating and damage to the catalyst.
•If you experience starting difficulties, loss of power or engine
problems while driving, the cause could be a failure in the ignition.
In this case, fuel may be entering the exhaust system withoutburning and, in this way being released into the atmosphere.
Furthermore, the catalyst could deteriorate due to overheating.
Reduce speed immediately. Have this problem fixed at the nearest
Technical Service Centre.
•Do not overload the engine with oil
⇒"Engine oil" chapter.
•Do not towstartthe vehicle for more than 50 m
⇒"Tow
start/towing" chapter.
N No
ot
te
e
Even when the cleaning system for exhaust fumes is in perfect working
order, under certain circumstances, the fumes may smell like sulfur.
This depends on the percentage of sulfur in the fuel.
Often it is sufficient to change brands or buy super unleaded.
K
•D Du
ue
e tto
o ppo
os
ss
si
ib
bl
le
e hhi
ig
gh
h tte
em
mp
pe
er
ra
at
tu
ur
re
es
s oof
f tth
he
e cca
at
ta
al
ly
ys
st
t,
, ddo
o nno
ot
t ppa
ar
rk
k iin
n
p pl
la
ac
ce
es
s wwh
he
er
re
e tth
he
e cca
at
ta
al
ly
ys
st
t iis
s eea
as
si
il
ly
y eex
xp
po
os
se
ed
d tto
o iin
nf
fl
la
am
mm
ma
ab
bl
le
e mma
at
te
er
ri
ia
al
l.
.
•D
Do
o nno
ot
t uus
se
e aad
dd
di
it
ti
io
on
na
al
l ppr
ro
ot
te
ec
ct
ti
io
on
n ffo
or
r tth
he
e bbo
od
dy
y oor
r aan
nt
ti
ic
co
or
rr
ro
os
si
iv
ve
e ppr
ro
od
du
uc
ct
ts
s ffo
or
r
s su
um
mp
ps
s aan
nd
d eex
xh
ha
au
us
st
t ppi
ip
pe
es
s,
, c
ca
at
ta
al
ly
yt
ti
ic
c cco
on
nv
ve
er
rt
te
er
rs
s oor
r hhe
ea
at
t ssh
hi
ie
el
ld
ds
s.
.T
Th
he
e
a ab
bo
ov
ve
e mme
en
nt
ti
io
on
ne
ed
d mma
at
te
er
ri
ia
al
l cco
ou
ul
ld
d iig
gn
ni
it
te
e wwh
hi
il
le
e ddr
ri
iv
vi
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G